Hello spikey, is that with the dB killer in as I know sometimes they come with a db killer and also do you have to put the silicone in or can you get away without using it. Cheers bro🤘
Hey spiky . Did you bypass the side stand cut off switch? How is yours running with the stand down? Just picked my one up and doing the exhaust tomorrow plus a tail tidy. Looking forward to a big bore kit being released!
it should still run with the stand down mate it’s normally only when you either try putting it in gear or you try finding the biting point to set off it usually cuts out. If any of that makes sense
Hey Buddy man that is one mean sounding bike ,,,sounds sweeeeeeeeeeet bro enjoyed watching the install ,,stay spikey,biker ,,lol ride safe my motorcycle brother ,,,LIKED ( thumbs up )
Hi Spikey, nice video's! When i search on internet i see that some tnt bikes has no italy logo on the buddeseat. You know why some have and some havent? New out of the factory. Some have the red break claw lower on the frontwheel and some higher? Maybe the differents between 2017 and 2018 models?
Hi spikey biker. Thanks for all the videos, really appreciate it. I bought the same levers as yours but I can't manage to get the clutch cable tension right like at all and now I'm bike less again... :( How did you adjust the cable to get it right? I thought this would be super easy but now I have no working clutch haha! Thanks!
Rupert Higgins thanks bro i appreciate that 👊🏼😁. I had the same problem too and it took me some time before i adjusted it right. Be sure to watch my video on friday and i will do a quick clip and show you how to adjust it bro
TheSpikeyBiker ok great, that'd be amazing thank you! I'm hoping I can sort it all out tomorrow morning with some actualy daylight and get riding asap😂
Hello Spikey, I bought the werx exhaust, and it comes with speed additive as a gift, do you recommend using it? and how is it used? Thanks greetings from Spain
yo man it is Speed additve shooter engine perfomance improver from LIQUIMOLY, I understand that it is for cleanliness of injection and aspirated, but my engine works perfectly, should I use it? , This weekend I went to install the exaush hypee (L)
hey m8 nice video i have a question for you.. in couple of months i ll buy a bike and im thinking of benelli tnt 125 or go for 3600euros for bn 251.. the question is do you have any problems with a second person on the bike? is it comfortable the other person? 2200 vs 3600 are a lot of money and the only thing im worried about is the second person. thanks!
Christian C well honestly i have never had anyone else on the back of my bike but it is a comfortable bike and I wouldn’t imagine it being too much of a problem in short journeys but if it was long journeys then i would consider paying the extra money and getting the higher cc.
Dirty Harry hi yeah i would imagine it would void the warranty. But to be honest i have had it for a while now and trust nothing will go wrong with it 👌
8Jacob2 well it is definitely heavier than the werx exhaust i would say it’s about 3 times as heavy but not to sure specifically how much it weighs. But you can tell the difference when riding
Hi guy ! I just bought the same exhaust following your video. Your video is great but I liked u 'good tutorial, because in addition I'm French I have a little trouble :D my question was, I'm 800km, do you think I can still change the exhaust?
TheSpikeyBiker Anyway, thank you for your great videos. I hope my mechanic will do it to me. He told me he will not touch anything before 1000km .. And I do not feel like doing it alone :)
@@killaco23 What is the difference actually between 125 and 135? Anyway in my country I can drive a 125cc (if not more than 15HP) with a driving license for car. But why do they make a version with only 10cc difference?
Max torque can do a full decat pipe for the tnt 125 do no cutting involved it’s just undoing bolts putting the full exhaust system on then connect the end can and sway it goes
Its alive, its alive. Exhaust sounds great and so does your lovely assistant.
Bikes & Drones 😂 yeah can’t wait to get it on the road. She is an absolute star 👌😁
Love the exhaust sound.
Luqman Hakim its amazing 👊🏼😁
Great videos I've just ordered a TNT gets delivered next week
wooohoooo! i'm actually so excited you got this and thanks for showing how it goes on!
outie555 thanks bro can’t wait to get it out on the road 😁
Hello spikey, is that with the dB killer in as I know sometimes they come with a db killer and also do you have to put the silicone in or can you get away without using it. Cheers bro🤘
I was gonna say the stock tips look great. Glad it was reusable. Nice clean install.
I’ve just ordered the 2021 tnt 125...hoping I can use the same pipe on mine...guessing I can :-)
YEAH BABY THE NOISE THE NOISE.
John Saunders hell yeah it sounds so deep in person 😍
i wound of thought you might go for a spin on yout bike mate just after you put the werx exhaust to see what like on a ride.
John Saunders yeah i did want to bro but i had to get to work then 😞
Hey spiky . Did you bypass the side stand cut off switch? How is yours running with the stand down? Just picked my one up and doing the exhaust tomorrow plus a tail tidy. Looking forward to a big bore kit being released!
it should still run with the stand down mate it’s normally only when you either try putting it in gear or you try finding the biting point to set off it usually cuts out. If any of that makes sense
Hey Buddy
man that is one mean sounding bike ,,,sounds sweeeeeeeeeeet bro
enjoyed watching the install ,,stay spikey,biker ,,lol
ride safe my motorcycle brother ,,,LIKED ( thumbs up )
Thanks bro i appreciate it 😁.
Sounds much better now 🔊👍 I'm getting mine done soon decat took out got mine ordered for me 2017 KTM Duke carnt wait 😁
KTM Duke Stevo honestly bro it is so worth it and it feels so much smoother when you ride it too 👌
You still using the Werx exhaust or did it get annoyingly loud after a while?
Hi Spikey, nice video's! When i search on internet i see that some tnt bikes has no italy logo on the buddeseat. You know why some have and some havent? New out of the factory. Some have the red break claw lower on the frontwheel and some higher? Maybe the differents between 2017 and 2018 models?
Aup spikey, would changing the exhaust void the warranty do you know? Cheers
I too would like to know this
Hi spikey biker. Thanks for all the videos, really appreciate it. I bought the same levers as yours but I can't manage to get the clutch cable tension right like at all and now I'm bike less again... :( How did you adjust the cable to get it right? I thought this would be super easy but now I have no working clutch haha! Thanks!
Rupert Higgins thanks bro i appreciate that 👊🏼😁. I had the same problem too and it took me some time before i adjusted it right. Be sure to watch my video on friday and i will do a quick clip and show you how to adjust it bro
TheSpikeyBiker ok great, that'd be amazing thank you! I'm hoping I can sort it all out tomorrow morning with some actualy daylight and get riding asap😂
Rupert Higgins 😂😂 yeah that would be great and no problem anything for a sub 👊🏼😁
Rupert Higgins hey i uploaded that vid. I placed it at the end of the vid for you so i hope it helps
TheSpikeyBiker thanks for the explanation at the end. Wish I watched this before needing around with it haha but now it makes sense. Cheers mate 👊
Hey bro, what kind of silicone have you used? and where does it apply? waiting for my werx pipe hype
That sounds miles better
Adam66787 its so good 😍😁
Good information bro
Hello Spikey, I bought the werx exhaust, and it comes with speed additive as a gift, do you recommend using it? and how is it used? Thanks greetings from Spain
Jose Angel GG nice 👌. Well what speed additive is it? 😁
yo man it is Speed additve shooter engine perfomance improver from LIQUIMOLY, I understand that it is for cleanliness of injection and aspirated, but my engine works perfectly, should I use it? ,
This weekend I went to install the exaush hypee (L)
hey m8 nice video i have a question for you.. in couple of months i ll buy a bike and im thinking of benelli tnt 125 or go for 3600euros for bn 251.. the question is do you have any problems with a second person on the bike? is it comfortable the other person? 2200 vs 3600 are a lot of money and the only thing im worried about is the second person. thanks!
Christian C well honestly i have never had anyone else on the back of my bike but it is a comfortable bike and I wouldn’t imagine it being too much of a problem in short journeys but if it was long journeys then i would consider paying the extra money and getting the higher cc.
You should make a video on how to change your tires to Michelin city grips 🙃
Hey mate, did you use the two spacer rings; in between the end-pipes and the frame? Cheers
Y1PP13K1Y4Y no I didn’t use them to be honest.
I just got my tnt125 last month, I want to install the werx pipe as well but I'm not sure if its not going to void my warranty.
Of course it will, he cut the original pipe. If you change stock materials, it will no longer be covered by warranty
Where did you find levers and mirrors?👍
Zambra y Gomez i got them both from ebay and they are universal
Ey up buddy ...i have a 68 reg n just ordered the werx pipe.. it doesnt effect MOT's does it with emissions ?
Hi Gareth, bikes dont get tested for emissions you will be fine
where you bought the change?
Just subscribed.
Does that exhaust void the warranty?.u cant put stock one back because its cut.
Dirty Harry hi yeah i would imagine it would void the warranty. But to be honest i have had it for a while now and trust nothing will go wrong with it 👌
Nice 😍
Peter Weiskvist 👌😁
Awesome stuff .check for leaks for next couple days.
Andy I. Thanks for the heads up i will do. I put silicone all around so hoping that should do the trick.
TheSpikeyBiker yeah that will do the trick but just to be safe give it a few checks peace of mind stuff. How much oil did u use on the oil change.?
Hi, would you know how big is the weight difference? I´ve heard the black silencer is very heavy.. Cheers, Jakub (CZ)
8Jacob2 well it is definitely heavier than the werx exhaust i would say it’s about 3 times as heavy but not to sure specifically how much it weighs. But you can tell the difference when riding
What did you use to connect the two parts? It seems scotch tape
38 mm or 48?
Amazing
Congrats mate. It sounds awesome!
I was wondering... How tall are you?
Greetings from Denmark :)
Marcell Westergaard thanks bro 😁. Im 5ft10
Okay.. Thank you :D
Do you have the link for the exhaust?
Hi guy ! I just bought the same exhaust following your video. Your video is great but I liked u 'good tutorial, because in addition I'm French I have a little trouble :D my question was, I'm 800km, do you think I can still change the exhaust?
Major Tomski thank you very much i appreciate that 😁. And yeah i do indeed i changed mine at 700 and i know some people who have done it earlier
TheSpikeyBiker Anyway, thank you for your great videos. I hope my mechanic will do it to me. He told me he will not touch anything before 1000km .. And I do not feel like doing it alone :)
Sounds awesome you got the link
can fit in benelli 135
Syabil Akif did you ever get an answer on this? I have the same question. I am having a terrible time finding parts for my 135
@@killaco23 What is the difference actually between 125 and 135? Anyway in my country I can drive a 125cc (if not more than 15HP) with a driving license for car. But why do they make a version with only 10cc difference?
@@bekeneel I know from his other video the 135 has a 5mph higher top speed. It's just a little quicker as far as I can tell. Not a big deal.
Yeaaaaaa
Ayxmaz Jump yeah boi 👊🏼😁
You should have gone for a scorpian egxasut or sc protects egxasut the are both nice and sound great
Hunter Sam yeah i agree mate i do love the look and sound of them but i like the pipe werx price better 😉😂
TheSpikeyBiker yeah I don't blame you they coast £500 to £1000
Where can buy???
Hi where i can buy this tube?
Silicon for what?
dont werx do a front downpipe too? seems a shame to put that shiny stainless werx on the crappy black oem exhaust
nathan brown no they don’t, it’s sad because i would have bought the pipe for it too. But i guess it’s just a cheap way to make a lot of noise 😜
Max torque can do a full decat pipe for the tnt 125 do no cutting involved it’s just undoing bolts putting the full exhaust system on then connect the end can and sway it goes
The other exhaust would’ve cost you $230 usd.. other words.. it would be £170-£180 lol but sounds nice!👌
Sam Welford yeah still that dollar dollar 👀😂. I just can’t wait to get it out in town now 😁
TheSpikeyBiker yeah that’s true man! Yeah! Haha! Just make sure it’s not raining 😂
Sam Welford 😂😂 ah don’t say that
Wheres the 49cc mini bike
clintus fan dont worry bro i will be bringing it out soon 👊🏼😀
I liked it first
progamer 123 thanks bro 💪🏻😁
What the hell is a 5 to 8 spanner? Surely this is a 5 8ths spanner and surely this bike must be using metric systems not 1940's imperial?
Any questions you have i will answer and i have many more vids about the benelli tnt 125 too so check them out 👊🏼😁
hello i can't find this can u help me to find please?
Alican İstif here we go www.pipewerx.co.uk/webshop/benelli/tnt125/benelli-tnt-125-decat-pipe/
Spikey Hi, have you found any differences in power output and max. speed? Thanks
Hey I just got my tnt 135 did you feel any change in power or throttle respond after the werx pipe.
Are there any like 180cylinder kits for this bike? That would be nice, would bring it from like 10-11bhp to 28!
Bro you could have at least revved it after watching the whole vid
Please take the rear foot pegs off...