I clicked on this thinking it had 50,000 views, top quality video mate. Loved the process. Try P&S brake buster in a seperate foam cannon (buy a seperate one for your wheels), it foams like crazy in a foam cannon, way better than a pump sprayer bro. I put 70/30 in the foam cannon when I do my wheels. 1 full foam Cannon will last u a dozen washes easily.
Quick question, usually i see people wash the car before claying it. i see why u did the iron decon before but why did you clay before you wash. i mostly see people clay after doing the actual wash stage. anyways i love the cinematics, great video.
In most videos I see, the iron remover is used AFTER the snowfoam/wash? Any reason why you do it before? And some advice: wear some gloves when applying a ceramic coating.
The main reason why I do it after I pre-rinse the car is because I clay while the car is foamed down for the extra lubrication. Using an iron cleaner before hand prevents me from picking up extra additives in my clay media. You can pretty much use an Iron Decontaminate when you’d like, just always before a clay in general though.
Something that didn’t make sense to me was when you clay’d prior to washing. I think you incorporated a fair amount of marring prior with pushing in a lot of the contaminates on the surface. Then doing a contact wash seemed like a waste. What I would’ve done is a contact wash, rinsing and drying the vehicle and following up with the iron remover then foam and clay once again. I find it more affective as I wouldn’t need to polish as much to save my self some clear.
is there a good way to restore headlights? I normally just put 303 aerospace protectant on them, but some manufacturer plastics are just garbage... they need to make headlights out of something better.
It’s made by Proje. When I first saw an ad for it, I was very curious as to if it was worth a crap, but once buying it and using it on my own vehicles, I can definitely vouch for their ceramic coating. A solid product for sure.
@@therealCompactO For sure! projeproducts.com/collections/ceramic-spray-coating/products/ceramic-coating-16oz I always recommend high-quality coatings, but I love having this stuff for those who don’t want to necessarily pay over $800. And this stuff performs well.
You definitely should. And I did. I talked about giving it time to cure and I put the topper on the next day. Definitely don't want to go throwing stuff on it right away Lol
Lol Yes, iPhone 11 Pro Max. I have a Canon 80D, but I really haven't found anything that I can confidently point & shoot with, without skipping a beat, thats better than my iPhone.
My ceramic coating details start at $350 for a standard ceramic coating and ranges to as much as $2,000 depending on the vehicle, type of ceramic coating, and the extend of the polish. Whether it be a basic polish or a full on paint correction
@@dayday2x14 8:00 is Aurora Nomyn from Audio Liabrary on TH-cam (No Copyright Sounds), and as for 14:40 I can't find the audio file for it. Sorry man! Hope I helped a little bit.
What I saw seems very contrary to what most teach... I would think you'd hand wash before clay.... get as much dirt off first.... then clay what does not easily remove....
My dream car 😍😍 you did an amazing job !
good videography and quality work, good music and super relaxing to watch .good work 💯👍🇵🇹
Amazing work brother! Video production was on point as well!
I clicked on this thinking it had 50,000 views, top quality video mate. Loved the process. Try P&S brake buster in a seperate foam cannon (buy a seperate one for your wheels), it foams like crazy in a foam cannon, way better than a pump sprayer bro. I put 70/30 in the foam cannon when I do my wheels. 1 full foam
Cannon will last u a dozen washes easily.
Class video and work lad watching you machine polish such a big area at one time makes it look easy and fast..🤙 top job 👌
Your cinematic videos are absolutely dope, u got me as a subscriber
You should do a video on how to price your customers and how to get customers 👌
Quick question, usually i see people wash the car before claying it. i see why u did the iron decon before but why did you clay before you wash. i mostly see people clay after doing the actual wash stage. anyways i love the cinematics, great video.
Amazing Job man! Need you in Nashville 💪🏼
Outstanding work keep it up bro ❣️
Love GT-r and you reminded me why.
Beautiful 👏👏👏
In most videos I see, the iron remover is used AFTER the snowfoam/wash? Any reason why you do it before? And some advice: wear some gloves when applying a ceramic coating.
The main reason why I do it after I pre-rinse the car is because I clay while the car is foamed down for the extra lubrication. Using an iron cleaner before hand prevents me from picking up extra additives in my clay media. You can pretty much use an Iron Decontaminate when you’d like, just always before a clay in general though.
Great video, but why did you clay before actually washing the car?
Gtr r35: I'm so good when my owner shower me. Ahhh so good
Love your videos bro
It’s 7am and i’m watching this before i start work is that weird ?
What is your power washer set up i like it would love to copy it you should do a video about it
It’s a Sun Joe SPX3001 with an extended hose and a Mosmatic SG35, I can definitely do a set up video at some point. Thank you for the idea!
@@ccdetailing thanks man i like the set up 🤜🏽
Something that didn’t make sense to me was when you clay’d prior to washing. I think you incorporated a fair amount of marring prior with pushing in a lot of the contaminates on the surface. Then doing a contact wash seemed like a waste. What I would’ve done is a contact wash, rinsing and drying the vehicle and following up with the iron remover then foam and clay once again. I find it more affective as I wouldn’t need to polish as much to save my self some clear.
I was wondering the same thing. You always clay (if needed) after the wash and chemical decon.
Ditto .....always contact wash first. Clay first is swirling dirt around and marring
Video loaded out of sequence but the performance wasn’t 😊
is there a good way to restore headlights? I normally just put 303 aerospace protectant on them, but some manufacturer plastics are just garbage... they need to make headlights out of something better.
What was you using on the tires in the spray bottle it was clear
It was not clear, it was a light blue. It’s a super clean but diluted quite a bit. Doesn’t look purple, yet it looks like a “water blue” when diluted.
great vid :D
Why did you clay before wash??
How much would a detail like this usually cost?
BRO! You’re on your way. When do you want to start your own line of detailing liquids and brushes ??? I’ll help
Market is saturated
Do many detailers do the underside of the car?
What Coating did u use? I never have seen a ceramic Coating in that size bottle.
It’s made by Proje. When I first saw an ad for it, I was very curious as to if it was worth a crap, but once buying it and using it on my own vehicles, I can definitely vouch for their ceramic coating. A solid product for sure.
@@ccdetailing got a link for me? So i can take a look? ✌️
@@therealCompactO For sure! projeproducts.com/collections/ceramic-spray-coating/products/ceramic-coating-16oz
I always recommend high-quality coatings, but I love having this stuff for those who don’t want to necessarily pay over $800. And this stuff performs well.
What's the name of the spray that you used after ceramic coat?
P&S Bead Maker
Did this have scratch shield paint?
Shouldn't you let the ceramic coating cure before adding a topper?
You definitely should. And I did. I talked about giving it time to cure and I put the topper on the next day. Definitely don't want to go throwing stuff on it right away Lol
You used iron remover and clay before washing.
Completly senseless. Only scratching the paint
@@jannik7715 but really he was gunna polish the paint anyway...also there was a ceramic coating on it already.....did you listen to the video?
What ceramic coating were you using
Proje Ceramic Coating. I’ve been testing on my own vehicles and has shown awesome results for the price point. I recommend it fully.
all footage from u phone ??
Lol Yes, iPhone 11 Pro Max. I have a Canon 80D, but I really haven't found anything that I can confidently point & shoot with, without skipping a beat, thats better than my iPhone.
@@ccdetailing great video
Can you put the product you used on this car
This was Robert Himler’s gtr?
What ceramic coating is that?
Proje Ceramic Coating
What’s the price for this
My ceramic coating details start at $350 for a standard ceramic coating and ranges to as much as $2,000 depending on the vehicle, type of ceramic coating, and the extend of the polish. Whether it be a basic polish or a full on paint correction
@@ccdetailing what’s your location
@@jessegutierrez1869 Central Florida
soundtrack?
All of my music is from Epidemic Sound. If you want to give me a time stamp, I can go back and give you the name of the song if you’d like!
@@ccdetailing @8:00 & @14:40
@@dayday2x14 8:00 is Aurora Nomyn from Audio Liabrary on TH-cam (No Copyright Sounds), and as for 14:40 I can't find the audio file for it. Sorry man! Hope I helped a little bit.
Wash gtr: gtr get shower
Polish gtr: gtr getting makeup
What I saw seems very contrary to what most teach... I would think you'd hand wash before clay.... get as much dirt off first.... then clay what does not easily remove....
That’s absolutely the way you should do it. You’re risking grinding dirt into the paint doing it out of order.
Yo
この動画、CM多すぎ
No engine bay cleaning??
Мыть чистую машину легко и не показатель,ты покажи как и чем грязную отмываешь
Please . Stop. Speeding. Up. Your. Videos.