S4 E4 Transforming Your Geo Tracker 4 Off Road Adventures
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Can't "Subscribe", "Like" or "Comment" , ?? Then you can still support the channel by buying us a cup of coffee if you like. www.buymeacoff...
This is Part 4 of the 6 Part "Affordable Off-Road Series"
In this Episode we Submit a Re-Enactment of buying your first Geo Tracker or Suzuki Sidekick. Once we get her home we check and top off all of the fluid and take down to the wash to test her out and see how she does on various obstacles in her stock form.
If she passes, then we take her home and modify her by enhancing her Off-Road Prowess with a Body Lift, a Budget Suspension Lift, A Targa Top, CB Radio and then we remove the stock bumper covers, Add some 31" tires, and finish her off with a Tuff Trails Rattle Can Paint Job.
Once she's ready and the transformation is complete, we take her for an Off-Road Adventure.
Come Ride along on this episode...
Check out our NEW Amazon Storefront for Geo Tracker and Suzuki Sidekick Parts and Products. www.tuff-trail...
Rock Intro 4 by Audionautix is licensed under a Creative Commons Attribution 4.0 license. creativecommon...
Artist: audionautix.com/
This channel is for entertainment purposes only! Do not do what I do. Do not take my advice. I am not a professional.
Disclaimer: I am an Amazon affiliate. As such, I may earn a percentage of sales made through Amazon Affiliate links found in the description of my videos and on my website and other places.
The following are our Amazon Affiliate Links for specific Products used in this video and on the project.
amzn.to/3QfHbbt MaXpeedingrods 2" Lift Kit for Geo/Chevy Tracker/Suzuki Sidekick 1989-1998 | Suspension Leveling Kit
amzn.to/45vEKXB Trail Gear KSP-BL2 2 Body Lift Kit All Suzuki Sidekick/X-90/Vitara/Grand Vitara
amzn.to/3oEzvWf 5x5.5 Wheel Spacers 2 inches with 1/2-20 Studs,
amzn.to/3JtH890 High Performance Replacement Electric In-tank Fuel Pump w/Installation Kit For Multiple Models E8023
amzn.to/3RjVxcX 4500-lb Waterproof Winch Electric Winch Kit, Synthetic Rope Waterproof IP67 Electric Winch
amzn.to/3Pyohfw BFGoodrich Mud Terrain T/A KM3 Radial Tire 33x12.50R15/C 108Q
amzn.to/3RUyqpJ Pro Comp Alloys Series 69 Wheel with Polished Finish (15x10"/5x139.7mm)
amzn.to/45awts6 Monroe Shocks & Struts Monro-Matic Plus 32303 Shock Absorber
amzn.to/3YXwZbo Tire Valve Stem Caps for Car Tire Cap 5 Pack
amzn.to/3PPDE3c Uniden PRO505XL 40-Channel CB Radio. Pro-Series, Compact Design.
amzn.to/47TWhv1 Cargo Net for, Rear Trunk Cargo
Love the video. Really helps because there’s not much content around these Suzuki and they are really popular here in Greece 🇬🇷
Sweet, Glad you liked it...we have many many more videos on our channel...thank you for your comment
Loving the content KEEP IT COMING!
Will do. Thank you
I like all your videos
Thanks Steve, we are building a 92 now... should be an interesting series.
Thank you for your comment
You all need to come to upstate New York and hit some mud!!! See how the rigs do..
I hate mud...such a mess to clean. I have found that when following a lifted ford pick-up with 44" tires through a mud hole is not a good idea for us little guys, we tend to high center and need a tug to get out. lol Thank You for your comment
The bumpers you have are cool!
These are actually stock bumpers with the plastic covers removed. We simply painted them after we positioned them in relationship to the body lift. Here in Arizona, we run a lot of desert washes and we seem to tear our plastic bumper covers off...so we simply remove them when we modify our units. I am not sure what you will find behind the 2001 model that you have. We really focus mostly on 1st Gen Trackers/Sidekicks & Vitara's. The 89 Tin Top, has 4.5" dia. steel pipe for bumpers.
@@tufftrails a lot like yours without the holes. Can always drill some in it.
They go anywhere with the right drivers lol..
I agree, gotta know what your ride can do and what it can't.
I just started having interest in these. I got a nice tracker and love it
Careful, they will grow on you... I started with one about 12 years ago, now I have 6, A TH-cam Channel and a Geo Tracker online parts store... they are addictive. Thank you Mr. Jergins
Actually it’s a nice video.
Thank You, very kind of you to say.
At 8:20 those look like the rims I bought for 200 bucks for my tracker two days ago .
Looking good
Cool, I had some problems with mine so they are stacked in my garage now. Tires were 33's, didn't want to cut fenders. This build looked better with stock painted wheels and 1" spacers.
@@tufftrails problems what problems? Bolt studs to short ?
LOL, no, the tires are 33" tires and they hit my lower part of the fenders when turning. Which normally is not a problem, I will just trim the fender, but I didn't want to cut this one. Also they would hit the top of my fenders when getting twisted up on the trails. Again usually not an issue, I would trim the fenders just like recent Twisted Copper Overland Tin-Top Build.
I might put them back on the white 4dr, they did good good on that one. I have a set of 5 32X11.50x15's tires on some jeep wheels that I might use. But not the Jeep wheels, they are 5 on 4.5" bolt pattern and they do not fit our stuff.
@@tufftrails y'all ever want a different type of trails . We have the Alexander McKenzie/ grease trail its Close to me . Opposite of the desert
Does that copper ish colour on the black tracker bumper have a name ?
I like that colour combo .
When we started some 10 years ago this was our color. Calmini had a light blue color, another had Red so we picked Twisted Copper as our color. The color is a Burnt Copper and is available from VHT, we actually painted one of our Suzuki Sidekicks this color recently. It has a flat finish as it is intended to be a High Temp Engine paint but the metal flake really reacts in the light from the sun and the camera really picks it up and makes it pop. amzn.to/48qSCEl thank you for your comment Matt.
Ur opening sums it up bought one to do just what you’ve done but health problems r going to make me sell it probably a little nicer than with half the miles my loss is going to be somebody’s gain have a good start on it
I’ve got it listed I middle Tennessee on lsn and Craigslist if anyone is interested
They are a lot of fun, great TOADS, low cost of ownership, takes me out and brings me home every time. Sorry about the health issues...I get it.
The blue one? I checked it out,... I have 6 currently, need 1 more to complete my collection (sport), but I would be interested in your final sale price once it sells. Thank You for your comments ...
How do u make the top ? They look good!! The one right above your head. I need one bad mine is soft and it makes alot of noise slapping around. But I got a hard top on the back!.. good lookin geo yall got there! All of them!
Not sure who I am replying to, "Just Me", Sharon, or Bob... This is the video, th-cam.com/video/b3ogw7nu-0M/w-d-xo.html&ab_channel=TuffTrails Basically it's just a thin sheet of aluminum Diamond Plate like this one amzn.to/3FjWkDr 47.5" x 29" is the area that it covers. It has a slight tapper, a bit narrower at the windshield spreading slightly where it meets the roof panel.
The roof already has threaded bolt holes that will secure your Targa top, so you do not need to drill, Just find the bolts that you need, two on each side.
Bending the sides down can be down slowly using a vise, just work it slowly until it matches the contour you like. Cutting the material is probably best with a high speed "air" cut-off wheel, but can also be accomplished with a Sawz-all type hand held battery powered or electric saw with a metal blade or possibly with a jig-saw and a metal blade.
The Targa top will seal on the seal around the opening and will not leak once tightened down.
The thickness of the metal in the link amzn.to/3FjWkDr is thin enough to bend easily and thick enough to make a solid mount.
The next one I do I will make a good video... send me an email and we can swap cell#'s if you run into issues. Wizard2Wizards@Gmail.com
Thank you for your question, I hope this helps.
This is the size that I use, thicker, stronger and a bit harder to bend and shape amzn.to/3PY81o4 it's 1/8" thick. The link that I gave you in the previous reply, is just about 1/16" thick so it should easy to bend and shape by hand.
Brazil here. How is the power with this big wheels ? I got a sidekick 93.
The 31" tires work well on or off road. The big 33" tires do really well off-road but are terrible o road. Thank You for your question