Thanks for this. Got my 13 Sienna wired up. Layman's terms: Far /solo black wire is the reverse + or trigger. Connect it to the corresponding wire on your aftermarket head unit. The white and black pair close to each other are your video signals that connect to your rca plug. Sacrifice an rca plug and you'll see a center signal wire and loose "ground" wires. The rca center wire goes to black. The rca loose outer wires go to white. Then plug your rca end into the camera input on your head unit
Hi Guys, Let me help you out.. The third black wire from the right side is the Positive wire for reverse camera RF cable and 2nd white wire which is next to black wire is the negative wire for reverse camera RF cable. Now we need a power wire to trigger the screen once you switch into reverse gear so that is a another black wire on the left side near purple wire. You can use this wire to give the power to your dvd or navigation system to turn on and off your screen when you switch into reverse gear. So again, Black and white wire which is close to each other is a video signal wire and another black wire is just a power wire to turn on and off the screen..
This video is a life saver. Thank you🥰 . People, never buy any expensive harnesses from Amazon, rather do this as instructed on this video. Everything worked for me. I connected the factory camera to the after market android DIN. Initially the video images from the factory rear camera was appearing distorted on my android display. Later I found that I needed to change the rear camera settings on the android DIN to NTSC/PAL to get the factory camera images correctly on the screen.
Thank you for the video! I connected the same wires to my Pioneer AVIC 6000 NEX ( reverse wire to connector. Video and ground go to RCA connector).The reverse power works. However, there is no video shown on the screen. Is there anything I can do to fix the issue? Thanks again!
I have a Toyota Sienna 2014 with a navigation system. Can I have a reverse camera broadcast on this small screen as well. The screen of the information?
hi there i was wondering if you can help me out, i bought an used 2014 sienna and it seems that the previous owner did some modifications on the sound system and cut some wires on the back of the stereo now the steering wheel control wouldn't work and i have 9 lose wires and a missing plug on the back of the stereo please help
Are you able to tell me via text what color cable was the ground, reverse, video wire, etc...hard to hear due the background noise. I currently installed a Rosen radio with the cameral cable and I can't get the video on the radio. Not sure what is wrong. Also what kind of RCA cable did you attach to the it, obviously it had 3 wires. Thanks...
I have toyota sienna 2013 I'm having problem hook up backup camera with my navigation system can you please tell me what exactly wires you using because from your video is hard to make out which wire you using and another question if you know this or not one of my wire on the radio says break do I need to do something or just leave it alone
Just do as i says, first open the dash grill, then take your after market radio out, then open the oem backup camera screen, three wires need to connect to to aftermarket radio system, #1 white wire,#2 black wire,#3black wire, so white wire is going to connect with your RCA positive wire , then black wire is going to be connect with RCA ground, then there is another black wire next to purple wire, which going to be connect with you aftermarket dvd player backup camera wire! Got it thats all you need
Yo! Thanks for this video man! I was thinking if I would run a front camera and use this small screen to view the front and Manually install a switch. Will it work? Hope you reply since this video is made long time ago, yhanks
the three cable to connect it to the back screen black table as are very connected to the radio to aftermarket radio the why is a video the white collar and the red color is the negative to the video
Thanks for this. Got my 13 Sienna wired up.
Layman's terms:
Far /solo black wire is the reverse + or trigger. Connect it to the corresponding wire on your aftermarket head unit.
The white and black pair close to each other are your video signals that connect to your rca plug. Sacrifice an rca plug and you'll see a center signal wire and loose "ground" wires. The rca center wire goes to black. The rca loose outer wires go to white. Then plug your rca end into the camera input on your head unit
Hi Guys, Let me help you out.. The third black wire from the right side is the Positive wire for reverse camera RF cable and 2nd white wire which is next to black wire is the negative wire for reverse camera RF cable. Now we need a power wire to trigger the screen once you switch into reverse gear so that is a another black wire on the left side near purple wire. You can use this wire to give the power to your dvd or navigation system to turn on and off your screen when you switch into reverse gear. So again, Black and white wire which is close to each other is a video signal wire and another black wire is just a power wire to turn on and off the screen..
Wow thanks a lot you make it more clear
This doesn't work on my 2011 xle
This video is a life saver. Thank you🥰 .
People, never buy any expensive harnesses from Amazon, rather do this as instructed on this video. Everything worked for me. I connected the factory camera to the after market android DIN. Initially the video images from the factory rear camera was appearing distorted on my android display. Later I found that I needed to change the rear camera settings on the android DIN to NTSC/PAL to get the factory camera images correctly on the screen.
Shaan Shaikh's explanation helped identify the 3 wires easily. Thank you Sir.
Can you give me your address or phone number.thanks
Can you give me your address or phone number? Thanks
Thank you for the video! I connected the same wires to my Pioneer AVIC 6000 NEX ( reverse wire to connector. Video and ground go to RCA connector).The reverse power works. However, there is no video shown on the screen. Is there anything I can do to fix the issue? Thanks again!
I have a Toyota Sienna 2014 with a navigation system. Can I have a reverse camera broadcast on this small screen as well. The screen of the information?
hi there i was wondering if you can help me out, i bought an used 2014 sienna and it seems that the previous owner did some modifications on the sound system and cut some wires on the back of the stereo now the steering wheel control wouldn't work and i have 9 lose wires and a missing plug on the back of the stereo please help
Are you able to tell me via text what color cable was the ground, reverse, video wire, etc...hard to hear due the background noise. I currently installed a Rosen radio with the cameral cable and I can't get the video on the radio. Not sure what is wrong. Also what kind of RCA cable did you attach to the it, obviously it had 3 wires. Thanks...
Any adapters made since this video?
I have toyota sienna 2013 I'm having problem hook up backup camera with my navigation system can you please tell me what exactly wires you using because from your video is hard to make out which wire you using and another question if you know this or not one of my wire on the radio says break do I need to do something or just leave it alone
Just do as i says, first open the dash grill, then take your after market radio out, then open the oem backup camera screen, three wires need to connect to to aftermarket radio system, #1 white wire,#2 black wire,#3black wire, so white wire is going to connect with your RCA positive wire , then black wire is going to be connect with RCA ground, then there is another black wire next to purple wire, which going to be connect with you aftermarket dvd player backup camera wire! Got it thats all you need
I have an aftermarket screen but it doesn't have any wire for the #3 black wire.@@safdarmehfooz503
Yo! Thanks for this video man! I was thinking if I would run a front camera and use this small screen to view the front and Manually install a switch. Will it work? Hope you reply since this video is made long time ago, yhanks
Thx for the effort but honestly audio quality so bad and shaky video I have to find another video.
patty109109 He probably contributed more to society in this 3 minute video than you have you’re entire life
The reverse power works but there is no video shown on the screen.
it says no signal.
Please help !!!!!
only work if it has the backup Factory camera, is not working with a regular screen
find this video looks like you are using 3 wires when your comment can you describe what color does why are you using thank you very much
the three cable to connect it to the back screen black table as are very connected to the radio to aftermarket radio the why is a video the white collar and the red color is the negative to the video
Alguien sabe si hay otro video en español para los que no hablamos inglés
Lo encontraste????
El 3er cable que activa la camara y video alndar reversa, no supe como conectarlo.
Toyota Sienna 2013 Backup Camera
That video cable not works !!!!! Its not correct
Toyota USA Backup Camera
Ban co the cho tôi xin địa chỉ: hoặc so phons được không vậy ban .thanks
Toyota USA Toyota Sienna Backup Camera
Toyota Corolla iPhone iPod AUX
Cho tôi hỏi thăm .ban cho tôi xin địa chỉ cho nay được kg ban?Thanks
Toyota Camry iPhone iPod AUX
Honda CR-V iPhone iPod AUX
Honda CR-V 2.4 TG Honda CR-V 1.5 Turbo Mê Xe
Honda CR-V OledPro Mê Xe
Inaudible and inarticulate