JRM-01V50 3D-Print RC VTOL Jet in Action
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- Get the JRM-01V50 STLs on our new website:
aerojtp.com
Get your Bambulab 3D-Printer and Material here:
shrsl.com/29j33...
*Affiliate Link
#bambulab
If you wanna support this project, you can become my Patreon:
/ rene_rosentraeger
Or buy me a coffee :)
www.buymeacoff...
Support me on Paypal:
paypal.me/rros...
Well done! Quick question though: is there a list of components available before purchase somewhere to get an idea about the total cost? :D
Here is a parts list: aerojtp.com/s/aero-jtp/:PDF_Downloads
@renerosentraeger Besten Dank! :)
Bro I want to learn how to build one, do you have a course?
@@mrpianoanimalfarm4017check out my tutorial playlists
Офигенный проект, просто ваушно выглядит) Работайте!!!
Thanks!
A thing of absolute beauty!! Congratulations and your tenacity is unbelievable!
Incredible build my friend. By far my best vtol ive seen to date. Congratulations 🎉🎉
Thx🤙
Rene and I are super happy with the outcome!
I've built 2 VTOL planes, EPO kits with add-on VTOL hardware. The Ranger and Atlus are easy to put together, and my time investment was minimal. But even so, there's that moment when you transition from Vertical to Horizontal flight modes that makes everything clench up!
I can't imagine the glute fatigue when doing the same with a plane I'd spent 100's of hours assembling! You two are Men of Steel!
Great work! With German engineering and Australian tenacity, I'll bet this thing can knock back a couple VB's, cigarette in mouth, and still be able to solve Pi to 200 places.
Glute Fatigue lol.
😂😂 great comment
Absolutely mate! While wearing pluggers, stubbies and a wife beater 😂
Been following this project for a while, awesome job! So cool to see this come to life
Thanks for your interest! Rene and I are super happy with the results!
WoW. Was für ein geiles Teil. Einer hat es drauf, der andere nicht. Du hast es definitiv drauf!. Bin sprachlos. Top 👍
Vielen Dank!
Now that’s a work of art. Kudos
It’s been a long road but both Rene and I are super happy and have to extend a huge thankyou to David for the flight programming! Been a super team effort and a most satisfying outcome!
awesome plane thanks for sharing the stl files :)
Buying is not sharing. :)
@JohanFasth-w4r ja aber verständlich bei dem aufwand
Hope you enjoy them!
Congratulations Rene and Mark. Fabulous innovation,design and build
Thanks for the kind words!
What phenomenal work! I would buy one in a heartbeat!
Just do it!
What a cool plane! Good job
Absolutely beautiful! I've been watching for a long time and I cant wait to print my own! Rofl but I'm still struggling on getting my printer dialed in on printing the Polymaker lw-pla, I know its not the active foaming but that's why I chose it because it's supposed to be easier to dial in but not for this old guy haha. Amazing design!
lmk if you need any help I have mine printing in pretty good quality, currently making a c-17 out of it.
If you can get a bambulab printer, everything becomes easy. Even Lwpla.
Pure ART !
Congrats!
Truly impressive
Magnificent job! Kudos!. I would love to build it.
Amazing, Congrats.
Fantastic! Amazing! Now just make it larger so it can fly longer with one battery for VTOL and one for thrust. Also add wheels to the landing gear so a rolling takeoff is possible. This would allow for the VTOL battery to almost gone or the thrust battery then you will have a choice of runway landing or VTOL landing.
+1 for the landing gear.
+1 for a compatible micro cruiser :)
Richtig gute Arbeit Jungs, genau das was ich gesucht habe!
The JRM-01V50 is a perfect entry to VTOL. It is easy to build and reliable. The costs are super moderate for all components. Bigger jets will come, but costs rise exponentially.
Bro I want to learn how to build one from you@@renerosentraeger
They are flying in Windows XP desktop
Took some time to arrange everything correct again.
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
😂
Damn it I literally came here to say that exact same thing😂
True bro😂
OUTSTANDING ✌🏾 ❤
Really good progress!
Congrats...awesome engineering
Nicely done, guys.
Fantastic work! Such a joy to watch it working! Congrats!
Amazing!
Thanks!
Very nice you have come along way but your perseverance has paid off outstanding work🤩🤩Big GOV going to be interested if they not already watchin you🤘
Congratulations and well done!!!
Thanks 🙏
Absolutely fantastic!
very impressive, congratulations guys!
Thanks a lot!
Bravo Renè!
Excellent work. I would not be surprised if aircraft manufacturers want to upscale it to a warplane.
Klasse Rüdiger!
Super, super super! 😃
very cool rc
Thanks 🙏
Very cool plane and video!
Very impressive 👍🏻
สุดยอดนวัตกรรม การพิมพ์ 3D ครับ
Amazing project brother
freakin awesome!
Excellent! :)
Nice. Good attack drone.
Very Impressive
Cheers 👍💪✌
Fantastico 👌
Is it possible to add GPS and TOF sensors for position hold and landing smoothly?
Yes
Klasse
Amazing
Abs Fab!
Seeing it transition from forward flight to hover is extremely satisfying
Absolutely 🎉
Awesome! Cant wait to download mine! Any plans of building a vtol 70mm? That than still launch cruise missiles?
Not yet.
Full gaz!
Tip: Views with some ground or top down would help to see the plane speed and height especially during transitions.
Lieber René und Team,
was für ein außergewöhnliches und großartiges Projekt! Mega gute Arbeit und herzlichen Glückwunsch zum Erfolg, vor allem für eure Hartnäckigkeit!! 👍🏻
Plant ihr noch weitere Videos zu dem Projekt, in denen ihr z.B. auch auf die Programmierung in INAV eingeht? Oder gibt es Prgrammiertips, wenn man die Files kauft? Das wäre mega hilfreich! 😃
Viele Grüße
Jan
Hi Jan, ja es kommen noch ausführliche Videos zu INav. Ich denke auch mal auf deutsch.
Hut ab!
Does the files to buy include the dif files for the INav and setup instructions? Any plans to have a Discord group or a place for support?
I’m ready to buy and build!!
Of course the diff will be provided. We will also write an instruction how to set up the flight controller and connect everything together. A discord group is a great idea!
Wait a minute. Scale figure for reference? 😉
Gefält mir richtig gut. sogar noch besser als die Harrier die ich von euch habe.
🎉🎉🎉
megageil man! :D
Lockheed Martin 😁
We await patiently 😉
@marcphilippveenendaal4394 excellent
I’m not sure but you guys seem to be way ahead of the pack
Absolutely wonderful!!! Congratulations are in order, also where do I place my order pls?
Thx! Order it on aerojtp.com
That just has to be my next winter project. Do you include the bill of materials, manuals etc after the purchase on your site? I want to be sure I’ll be able to find all the electronics, looks like a complex plane :)
Yes Sure, a detailed manual and parts list is included in the download file.
Can it be mixed so that not so much altitude is lost during transition from hover to forward flight? Beautiful engineering and aircraft!
Yes, like I explained in the video, the four lift engines should run some seconds longer and I have to stop pitching forward while transition😅🤙
Nice nice ❤😊
Is a forum existing where some things can be discussed, f.e. filaments, slicersettings, flightcontroller etc. ?
The next video will be a dedicated tutorial and the comments can be used for discussion.
That's good to hear. World be great if you say something to printing the parts and glueing the parts together. Never done this before. Baught a Bambulab P1S for this project
Why have the edfs rotate? is it needed for hover? Awesome build!
Yes, the extra thrust is needed.
würd ich sofort kaufen....
Damn, five minutes of hover is just ridiculously long on a vtol
Will the micro cruisers be compatible with this model?
They are for the JRM-01 C70
💯% awesomeness clear down to the color. What printer did you use for such a print.
Bambu 🤷🏻♂️ what model 👍🏼
X1c
😅😅 That is F@ckin cool ❤
Yes 😁🤙
Hi Rene'! Superlative work! It is funny but I was just starting to search for fans quite similar to the ones in your wings, for a project I have started. Can I impose and ask what brand those wing fans are and where I might get them? TIA
Hq Prop cinewhoop on AliExpress..
Bro I want to learn how to build one. Do you have a course?
Tutorials playlists
3:31 WTFFFF
is it also possible to get the model settings for the radiomaster TX16S when i buy this model
Yes
Rüdiger nich soooo tiiiief!
possible to get your bambulab setting for this plane plz?
aerojtp.com/s/aero-jtp/:PDF_Downloads
@@renerosentraeger thanks so much;)
I don't know how to adjust parameters, is it recommended for a novice to buy it?
Dedicated tutorials will follow where I show everything. So no problem for a beginner
@@renerosentraeger After printing Is there an assembly tutorial?
@@不忘初心-h8e The download file includes a detailed assembly instruction. Super easy to build.
I remember this being one of the planes in a bullet hell shooter. Maybe it was Raiden II?
Ihr Flugzeugstart weckte Erinnerungen an Windows XP 2006
😂
My thoughts exactly
does this support the micro drones?
The Micro cruisers are designt for the jrmC70
+1 for micro cruiser support :)
Respekt! Drucke auch meine eigenen Flugzeuge (hauptsächlich Segler) und an sowas würde ich mich nie rantrauen. An welchem Platz fliegt ihr?
Mit den heutigen Druckern z.b von bambulab ist das absolut easy. Bei Berlin.
@renerosentraeger Jo hab auch einen Bambu aber meinte jetzt weniger das drucken am sich als das konstruieren und die Programmiererei der Controller. Ich nehme an ihr seid auch Segelflieger?
Which firmware u are using ardupilot or inav
Inav
Are you using fusion 360??
No, I use SolidWorks and build and construct in solids and surface modelling for our collaborative project.
Welchs Material verwendet ihr zum Drucken?
Lwpla
Looks very good❤
Is it also planned bringing the 70 version as vtool ?
Not yet
I was sceptic in the beginning because of the specific weight of 3D printed parts. There will be a significant difference comparing it to foam, carbon, balsa and other conservative materials used in RC modelling. Finally it seems to be a question of power. If there is enough you can even stones make flying. Are there other opinions? I am open minded to find out the mystery of this project. Nevertheless the protagonist showed that one can make things possible which seem impossible when the idea comes up. 👍👍👍
Modern core XY printer like the bambulab make this possible and there's still some Carbon inside 😅🤙
The specific weight of 3D printed parts is based on the material being printed. We used Active foaming LIght Weight PLA. It is essentially a foamed 3D printed set of components glued together to get a lightweight airframe with some fine carbon rods for stiffness and strength internally.
@@renerosentraeger Thanks for clearing up. 👍🙂
@@marcphilippveenendaal4394 Thanks for clearing up. Never heard of that special kind of PLA. I will look it up. I currently print PETG only, but it is for parts which are not intended to fly. 🙂
Normal PLA or LW?
Lwpla
why don't we print with polypropylene
0:55 windows xp background
I’m a lot more interested in the software hardware development.
There is a whole playlist
it is "Raid", not "Search"
why don't you paint it military?? so it looks like Harlequin...
145 bucks for cad files. lol.
Oh it’s more than just print files…printer settings, detailed 90 step PDF assembly instructions, additional accessories, painting templates and mask files, support stand files, clickable PDF parts list and general notes, control surface setting jig files and flight controller programming settings….
You're also paying for the engineering work that went into those CAD files.
@@Erowens98yes, that too 😂
Way to mouch money. I desing such by myself
@@_Bf-109its 2 years of precise Work 140€ is not that nad trh for something completly unique
too much supports
In your list of country india is not there are u not interested to sell us sir plz reply 😂😂
And the price is 138€or 13800 €
Just choose a country close to yours that's on the list. Other Indian already ordered, so no problem.
Warum muss man das als Deutsche auf englisch moderieren? Kein stolz mehr auf die eigene Sprache? Man kann es ja mit Untertitel auf englisch übersetzen lassen wenn man es in dieser Sprache hören will!
For god sake help us