WOW WOW WOW, You are showing so much talent! Your designs of the tables are next level. All three are amazingly good. I really enjoyed it, thanks for sharing!!!❤😊❤, Dona
É maravijoso pero a quem tiene todas las maquinas apropiadas . Jo como no tengo nenguna destas maquinas tento haser con la siera manual. Quen pudera se jo tuvese todas las maquinas desentes para haser algo asi. Loe felicito por tu fabuloso trabajjo. ❤👋👋👋👋👋👍🙏
Please don't use your miter gauge and fence together, place a stop block off your fence so that the wood isn't trapped between your blade and the fence, it's dangerous and it's only by luck you didn't get a piece shot backward at you.
These are some very nice pieces but honestly the wood is not scrap, I wish I could afford beautiful wood like this! When I think of scrap wood it is much worse than this. Your work however is really beautiful!
Ne isses aber nicht denn es passt nicht zusammen wenn unten drunter schaust und die Dinge sind nicht dicht aneinander. Trotzdem die Tischplatte ist gut. Aber das Untergestell das hätte ich viel besser gemacht
Ich Finde den Tisch toll, aber die hellen Quadrate haben an einigen Stellen schwarze Flecken, was nicht gut aussieht. Die hätte man nicht benutzen sollen.
What is the wood u are using for this flag my friend? To me it looks like a flag straight away with the cuts u made. I love the red coloured wood? What is it called? The white wood is what? Really like this video so far.
Me gustaría saber que es lo que le echa a las encimeras de las mesas que trabajos a en que mesas me encantas toda la tarde con sus vídeos gracias salud
you are having a lot of stopping to save the kickback of the piece you are cutting. Instead of using your fence to use as a stop get a strong magnet and set it back from the blade and advance away from the magnet. when your piece is cut it is not trapped by the fence and the magnet is already stationed for continued cutting. And You Don't Mess Up Good Cuts !!!
Also um ehrlich zu sein, hoffe ich dass diese Tische nicht verkauft werden. Allein in den ersten 20 Minuten keine Krise zu bekommen ist eine Kunst für sich. Es werde so extreme Fehler gemacht, das ist nicht mehr normal.
3rd world technology…lack of safety or proper use of power tools…combined with cheap labor and 2nd degree product…what else would you expect…looking for the out-takes for finger and eye injury…
Loved all 3
thank you my friend for sharing this video you are very skilled I like this table design THANK YOU
Деревянный пэчворк! 👍👍👍🤩
Люблю работы этого мастера. Он так красиво и легко работает, что кажется и сама сможешь сделать все.
I've just watched you're video & I like the 3 table's you've been making well done ✔.
Fantactik !!!!!
WOW WOW WOW, You are showing so much talent! Your designs of the tables are next level. All three are amazingly good. I really enjoyed it, thanks for sharing!!!❤😊❤, Dona
Maravilhoso parabéns
You are good with a skill saw. I would have never attempted cutting the top without a guide. I use my track saw for things like this.
I'll take one table and one kitty please! You do ship right? Lol Beautiful work! ❤
The Lamp/Light in the table is wicked too bruh. Great thinking on ur part man. U come up with some really nice ideas
Very good 👍
l like your apps all of the.
Wonder! 🇧🇷👋👋👋👋👋👋👋👋
Thats beautiful table 😊
Magnífico, sensacional 👍👋👋👋👋👋👋👋👋👋👋👋👋👋
Buitiful
É maravijoso pero a quem tiene todas las maquinas apropiadas .
Jo como no tengo nenguna destas maquinas tento haser con la siera manual.
Quen pudera se jo tuvese todas las maquinas desentes para haser algo asi.
Loe felicito por tu fabuloso trabajjo.
❤👋👋👋👋👋👍🙏
Please don't use your miter gauge and fence together, place a stop block off your fence so that the wood isn't trapped between your blade and the fence, it's dangerous and it's only by luck you didn't get a piece shot backward at you.
😊😊😊
These are some very nice pieces but honestly the wood is not scrap, I wish I could afford beautiful wood like this! When I think of scrap wood it is much worse than this. Your work however is really beautiful!
Sehr gute Arbeit ❤
Ne isses aber nicht denn es passt nicht zusammen wenn unten drunter schaust und die Dinge sind nicht dicht aneinander. Trotzdem die Tischplatte ist gut. Aber das Untergestell das hätte ich viel besser gemacht
Ich Finde den Tisch toll, aber die hellen Quadrate haben an einigen Stellen schwarze Flecken, was nicht gut aussieht. Die hätte man nicht benutzen sollen.
What is the wood u are using for this flag my friend? To me it looks like a flag straight away with the cuts u made. I love the red coloured wood? What is it called? The white wood is what? Really like this video so far.
Me gustaría saber que es lo que le echa a las encimeras de las mesas que trabajos a en que mesas me encantas toda la tarde con sus vídeos gracias salud
❤
you are having a lot of stopping to save the kickback of the piece you are cutting. Instead of using your fence to use as a stop get a strong magnet and set it back from the blade and advance away from the magnet. when your piece is cut it is not trapped by the fence and the magnet is already stationed for continued cutting. And You Don't Mess Up Good Cuts !!!
Thank you for watching the video. Wishing you good health
جيد
22:25
That's some precise work, right there
I was hoping someone besides me saw that!
muito bonita gostei
What's the clear liquid he puts on around min 20?
It's an instant hold like Krasy Glue
How will you change the light bulb when it goes out? 1:04:39
From underneath
He showed him putting the bulb back in after he sprayed it down
Lyddj😊❤
bu masa olmadı bence ayaklar ile tabla birbirine uyumlu değil ayakların daha kibar ve ince bir işçilik olmalıydı üst tabla harika oldu
👍
0:44 0:4월 한달간 적이 없는
so talented and yet he can't fit a blade guard on his circular saw
So it's not a FLAG then.. haha! Sorry bruh. I was expecting a flag at 1st
Der zweite Tisch ist nicht proportional. Das untergestellt ist viel zu wuchtig und schwer für die zu kleine dünne Tischplatte
Thanks for your opinion. We will try to make it even better
auauasus
Muss man sich wirklich ansehen wie 20 Brettchen geschnitten werden? Darum 🤮🤮🤮🤢🤢🤢😖😖😖
Also um ehrlich zu sein, hoffe ich dass diese Tische nicht verkauft werden. Allein in den ersten 20 Minuten keine Krise zu bekommen ist eine Kunst für sich. Es werde so extreme Fehler gemacht, das ist nicht mehr normal.
Ce vernis jaune, couleur pisse de chat, est horrible !
I'd do a much better job. Things are not lined up or even tight
Thanks for your opinion. We will try to make it even better
3rd world technology…lack of safety or proper use of power tools…combined with cheap labor and 2nd degree product…what else would you expect…looking for the out-takes for finger and eye injury…