On my scooter when I had the same problem I unscrewed the outer ring (by hand only) and was able to access the outer locking rings on the tumbler and lubricated accordingly with dry lube like you have done resulting in like new operation. I also blew out some significant amounts fine dust down the key hole.
White grease for boats is the best solution, it lubricates well, protects the mechanical moving parts of the lock, lasts for years and cannot be washed off by water. White grease in spray is also an excellent solution as a new lubrication solution.
super easy to fix with all bikes. Just spray some brake cleaner or pour a little bit of alcohol in the key hole. then proceed to repeatedly smash that key in there for a good minute to get it clean. then use either silicone lube or just some chain lube and proceed to smash that key in there again. i promise it will work every time and this method works with all key locks even car doors, houses, pad locks etc.. graphite only works if the key is damaged and needs to be replaced or if the pins in the lock are worn out. and really they don't wear out unless you or previous owner is the most aggressive unlocker in the world.
I used that same graphite on my Ninja 1000 for the same problem and it just gunked it up real bad. Took it to the shop and they used Bel Ray lubricating fluid but a cheaper option is the Supertech version of WD40. Problem solved.
it's best to use dry lube, you can try light silicon lube, because most chain cleaner are thicker formula and may stay inside and attract more grease making the keyhole more sticky in the long run
I just got a Honda CTX700D today and I bent the first key trying to unlock the wheel, and now the second key is already starting to look pretty sad just by my trying to start the damn thing. It is hard to take out and put in as well. Very frustrated.
Same thing with my Honda CBR ! You are not alone. I think the ignitions in our bikes can't handle the vibrations caused by high rpms, and they wear out really fast. My bike stranded me last week. It is in the shop now. (Nothing) would unstick that lock ! I tried the dry lube power before also - and it also made my lock even worse. I tried WD-40 dry lube - and that did not help at all. Garbage locks/ignitions these days !
![ค้างคืนโรงเก็บกระสวยอวกาศร้างกลางทะเลทราย [Around The World Ep. 3]](http://i.ytimg.com/vi/E5bWZQhABJE/mqdefault.jpg)
Thanks for the tip, but the video could be 90 seconds and you'd get the point across and a thumbs up.
On my scooter when I had the same problem I unscrewed the outer ring (by hand only) and was able to access the outer locking rings on the tumbler and lubricated accordingly with dry lube like you have done resulting in like new operation. I also blew out some significant amounts fine dust down the key hole.
Did you really need to make a 13 minute video just to spray a few drops
White grease for boats is the best solution, it lubricates well, protects the mechanical moving parts of the lock, lasts for years and cannot be washed off by water. White grease in spray is also an excellent solution as a new lubrication solution.
super easy to fix with all bikes. Just spray some brake cleaner or pour a little bit of alcohol in the key hole. then proceed to repeatedly smash that key in there for a good minute to get it clean. then use either silicone lube or just some chain lube and proceed to smash that key in there again. i promise it will work every time and this method works with all key locks even car doors, houses, pad locks etc.. graphite only works if the key is damaged and needs to be replaced or if the pins in the lock are worn out. and really they don't wear out unless you or previous owner is the most aggressive unlocker in the world.
Thanks man will try this tomorrow
I used that same graphite on my Ninja 1000 for the same problem and it just gunked it up real bad. Took it to the shop and they used Bel Ray lubricating fluid but a cheaper option is the Supertech version of WD40. Problem solved.
Why not just use w D40??
Your asking for trouble using wd40
Don't maul with your key ! Feel the key gently. Use no force
@@fpreston9527 why?
@@fpreston9527 why?
What product is that, would it be worth contact cleaner? This time I used w40 and it worked perfectly for me, but comment on what. or is it good
My key goes in fine but it won’t turn it off almost like it’s the wrong key but it’s not
Use WD specialist penetrating fast acting ez reach nozzle on the can and the WD will get that graphite out and it protects it from freezing up
Good to know
Can chain cleaner be used?
it's best to use dry lube, you can try light silicon lube, because most chain cleaner are thicker formula and may stay inside and attract more grease making the keyhole more sticky in the long run
I just got a Honda CTX700D today and I bent the first key trying to unlock the wheel, and now the second key is already starting to look pretty sad just by my trying to start the damn thing. It is hard to take out and put in as well. Very frustrated.
10:29 you’re welcome
Scrape off the graphite from a pencil and pour the powder in the ignition key but just a little bit. You’re welcome!!!
#2?
How about contact cleaner?
It won’t lubricate and will dry out the pins. You can use it first then try some WD40
You’re scratching your bike with the other key don’t put another key connected to your bike key
And it’s loud in the video
Wd 40 dry lube worked for me.
Same situation with my z900
Stuck and sucks!😭😭😭😭
I tried graphite fat, Lithium fat, wd40, nothing helped.
Today it took me 6 minutes to remove the key.
😭😭😭😭😭 Kawa-suck-i😭😭😭😭
Same thing with my Honda CBR !
You are not alone.
I think the ignitions in our bikes can't handle the vibrations caused by high rpms, and they wear out really fast.
My bike stranded me last week.
It is in the shop now.
(Nothing) would unstick that lock !
I tried the dry lube power before also - and it also made my lock even worse.
I tried WD-40 dry lube - and that did not help at all.
Garbage locks/ignitions these days !
@@iamtheiceman Same. In the morning everything was perfect. Took my bike for a ride. Same day, a few hours later and the key didn't turn.
Just use silicone spray.
Personally I would have used wd40 to clean it but water might work still
My advice to you, Stay away from anything mechanical..
Who tf cleans lubricant with water?! 😂😂😂
Locally I
This video makes me even more stress…
Sorry about it :(
13 min of few drops, and on master ignition key you hook up few keys more!! 🙄🙄🙄
Hahaha... Maybe a light lubricant works better than this powdery stuff
is WD40 recommended???
That tends to make things worse. WD-40 attracts dirt and will gum things up
You used far too much, just need a little graphite off a pencil, it will work…. You clogged it more by using so much…
thats what i figured..
Google.com
Boring 😂😂😂😂😂