Install OSB on a Shop Ceiling & LED Lights - Workshop Build Series
ฝัง
- เผยแพร่เมื่อ 19 มี.ค. 2022
- How to install OSB panels or plywood sheets to the ceiling of a workshop. I use a drywall hoist to lift the OSB panels to the ceiling where I then screw them to the ceiling joists. Using OSB on a ceiling allows you to easily and quickly screw lights and other workshop tools to these panels. In this video I also caulk the OSB joints and prime and paint the ceiling. Next I install flush mount round LED lights and florescent tube lights to the OSB ceiling. This is part 3 of my workshop renovation series.
LED Lights: amzn.to/3N9IZQD (affiliate links)
DRYWALL HOIST LIFT: amzn.to/3wlztUE
SUBSCRIBE: th-cam.com/users/MANaboutTOO...
PLANS: manabouttools.com/shop/
TOOLS I USE: manabouttools.com/tools-i-use/
My VIDEO GEAR: manabouttools.com/tools-i-use/ (affiliate links)
FOLLOW ME:
Instagram: / manabouttools
Twitter: / manabouttools
Facebook: / manabouttools
Website: MANaboutTOOLS.com
Patreon: / manabouttools
DISCLAIMERS:
Some of these links have an affiliate code, if you purchase tools with these links I will receive a small commission at no additional cost to you. Thank you! The tools or equipment seen in this video and have been purchased ourselves.
#OSB #OSBceiling #workshop - แนวปฏิบัติและการใช้ชีวิต
Great job! A cozy and well lit shop is essential for every man.
It sure is! Thanks!
Thank You
Great work and explanation as always, my friend. Not to mention the wicked editing skill. So cool.
👍 In the past, we have used exterior siding on our walls to avoid having to do drywall.
I just don't like doing drywall myself either.
We plan to do our own drywall in the house we are building now, so we'll see how it goes. 😅🏡
Thank you for the quick bit about the frustrations of working in a cluttered area. Your videos make you seem like a well-oiled machine with a nice organized and well thought out process. Now, I know you're just one of us! Haha. Truly loving this shop refit project, please keep them coming!
Thank you very much! I appreciate your kind words here.
Looking good! I was going to suggest those wafer lights. I have used a bunch of them around the house. The wife and I really like them. So easy to retrofit in. Cut the hole for the light and you now have a big hole to work through to fish the new cable.
Currently insulating and finishing my garage also. Probably going with drywall for the walls and ceiling due to cost though. Love your channel! Especially the renderings that transition to images.
Looks good.thanks for sharing. I love you style and honesty. I love your content and your graphics are second to none.
Very nice finish on the ceiling. I have found that using OSB for wall panels is particularly nice even if you later drywall for the same reason you did-you can attach things easier and don't always need to find a stud or joist. Thank you for sharing your build on this nice shop. Have a good week ahead.
Thanks Matt!
Very nice work and explanation.. Depending on how long the building has been standing and if you ever had winding weather the structure could have been twisted out of square. You would need to run a cable or two with screw ties to pull it back into square.
OSB over drywall? I like it! Too bad on the round LEDs, but at least you can use them elsewhere! Nice job!
The original LED's were still like new so I was able to box them up and exchange them for the slimmer ones.
Thanks for taking us on this journey with you. I'm sure filming while you're doing all this doesn't make it easier :)
Really coming along good.
Thanks! Been a ton of work, but rewarding for sure.
Kitty cats at 3 seconds, well done!
Nice install!
Thanks!
Another good thing about using the OSB is you don't have to search for joists if you need to hang something heavy from the ceiling. Just look for the screws holding up the OSB. Anyway, it's looking great.
Thanks George!
Have you thought about using LED tube bulbs? I got some full-spectrum ones that had a very high CRI for my kitchen and they're amazing.
I'm really looking forward to that OSB treatment video. That looks fantastic.
I looked into the LED tubes but they were more expensive. I would expect when it comes time to replace the tubes (when they burn out) that the LED's will be cheaper.
nice job
FYI, the BB stores have LED strips that will work with ballasted flouro fixtures for like $10/tube or less. You can also get those 4' fixtures with LED's for $20 from Costco. Nice work, I might try using the OSB instead of drywall for my workshop also.
Thanks! I'll look into that. Kent
@@MANaboutTOOLS Maybe keep the flouro fixtures (you have already bought and installed them), and swap in LED tubes as the flouro tubes burn out.
@@doubledarefan Shortly after I installed mine, one of the box stores had 2x 4" LED tubes for $10. That probably won't happen again in the near future though. Buy one and check the K color installed, sometimes the Daylight are just too blue.
Very nice. I hope kitty wasn't trapped in the workshop for too long! I have a very large room above my garage that has 6" deep floor joists on 18" I'd really love to convert this into a lab space with pull down stairs to get in there from the garage. The floor is not insulated and It would seem that the way to make the space work would be to nail 8" or 10" boards to the existing floor joists and lay down OSB over that after first putting insulation into the gap. It sucks that building materials are through the roof though!
Osb mold inhibitor , my not be rite away but it forms mold , good luck" 👍 😉
Thanks for the tip!
When should you trust any tester? When it tells you the circuit is live.
👏👍💪🔥
I used plywood on my shop walls up to 8 feet then drywall above that an on the ceiling when I lived on Thetis island. I cannot cope with the offgassing of OSB. And Plywood actually holds screws a lot better than OSB.
I had hoped to use plywood but at the time it was much more expensive than the OSB.
The author does like to from scratch, th-cam.com/users/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.
Can you offer a fellow aspiring woodworker some advice? I'm currently building a 12' by 16' gambrel style workshop. I finally just finished shingling the roof. My question relates to insulation.. I want to eventually insulate and finish the inside of my structure, but I'm worried about condensation and mold forming inside. I'm sitting on top of a wood-framed floor with 3/4" Advantech floor sheathing. My wall and roof sheathing is composed of 5/8" Zip System sheathing. I installed two large gable vents, each on opposite sides of the building about six to eight inches from the roof ridge. How can I be sure that my space is vented properly for insulation?
I'm surprised that you didn't use LED 4' lights, they are reasonable cost.
I was looking for more light output. But, I'm sure the 4" ones would have been just fine.
Surprised you didn't get LED lights that are all in one and have a power plug attached, makes it very easy to replace as there's no wiring needed (apart from the initial socket installation), just drop the light out and unplug it.
That would have been a good option. Maybe I needed to do more research into LED's.
In your area do you have to cover the OSB with something non-flammable like Gypsum board?
Probably. But for my small shop (that will be full of wood and wood dust anyway) I'm not going to do it.
Any reason why you didn't use LED tubes rather than fluorescent?
The fluorescent tubes were much cheaper at the time.
Is that OSB fire rated? Fire rated or not, what's the price difference between OSB and drywall?
I don't think it's fire rated. I'm pretty sure drywall is cheaper.
is their a reason why you lined the walls with plastic?
Yes, look into "vapor barriers"
Don,t you have led tubes in the USA ?
Yes, but can be much more expensive.
how thick was your osb?
7/16"
Hey Kent, this is off-topic, however found this interesting dry concrete vid and thought you might want to try this if you ever revisit your aircrete experiments th-cam.com/video/UTroH9MX5pw/w-d-xo.html
Doesn't address the aircrete/weight issue, but sure is interesting as no mixing is needed and curious what the strength might be.
Why OSB vs Plywood?
At the time it was cheaper.
Never seen plastic on the ceiling, Looks like it will be issues
Vapor barrier
@@MANaboutTOOLS I lived in Iowa and we did it only on the walls. As the house needs to breathe
that is not a roll up door, it is an overhead garage door.
yes
Sorry. Was für ein scheiss. Habt Ihr keine nut und Feder Platten? So im Format 62.5x250cm? So in ganz Europa und dem Rest. 👍👍😁🇩🇪