Pressing/Stamping/Sheet Metal Process/QDS/Quality Documents Solution

[@sweethumanissmsubbu592]

Super sir. You're 2 handed button system is ultimate

[@rohtashsharma3990]

Very best press shop knowledge thanks for sharing your experience with us.

[@PatelRonak6495]

Best video on press operations. Thanks.
Please make video on types of panel checker.

[@neerajkumar-fi7zm]

Excellent

[@birendragupta9215]

make a video how much thinning maintained in thinning operation

[@rahuldesai1351]

Thank you sir.

[@konetiveerendra]

Thanks

[@deepaknair3031]

Thanks Sir !!

[@surindersingh4786]

Sir that was also the picture of machenical power press not Pneumatic press

[@nareshbadiya2666]

Sir kindly Make video on Problem On Die Corrections..
Like Wrinkles & Crack & hole Bulz

[@VijaypaulPaul]

Sir defects ke solution .means how to resolve defects problems .please make a video on it.

[@pvp9897]

what is heat number ?

[@birendragupta9215]

Make a video how to check by pannal chekar and how to make inspection report by pannal chekar

[@birendragupta9215]

Make a video how to check by pannal chekar and how to make inspection report by pannal chekar

[@qualitydocumentssolution-q8183]

Coming soon

[@govindaraj_ravi5238]

Sir i have an doubt how to reduce the scrap mark in parts and hole bulge causes..

[@rakeshyadav-oy9kn]

Acceptance criteria of mannual press machine kaise define karte hai sir?

[@sagarshiwach2000]

Good afternoon sir
Sir i have a doubt
i.e How to mesure length of coil during inspection because there is no length is mension on it's tag . 🤔

[@qualitydocumentssolution-q8183]

This is only for strip for coil you can measure only thickness and width

[@sagarshiwach2000]

@@qualitydocumentssolution-q8183
But sir if any one ask to me into interview tell me the whole length of the coil before loding on the press machine then what I reply to them

[@qualitydocumentssolution-q8183]

1. There is no standard length of Coil
2. For interview- Tell them that I have to open coil and measure it so it will take more than 8 hours. Do you suggest that I should measure it.
3. You can consider IS 1852 or IS 1985

[@sagarshiwach2000]

@@qualitydocumentssolution-q8183 Thanks so much sir
For clear my doubt

[@qualitydocumentssolution-q8183]

Most welcome

[@himanshusrivastav6160]

Sir please tell me some knowledge of injection moulding process 🙏

[@qualitydocumentssolution-q8183]

Coming soon

[@sandipbaviskar9148]

defect ke bad solution bhi batayege esliye video pura dekha lekin solution nahi bataya sir aapne

[@lionsnetonu]

Very slow machine.