it worked but since my battery was at 26 volts and I plugged to the outlet to fully charge up it went back to its 2.4 volts and at this point there is no way I can find the same BMS to get it replaced. Thanks for your video.
He checked all the cells for proper voltages and balance. Then he checked the BMS for a short on the input. Then he checked a couple of components FETS, transistors, resistors and then called it good. Must of been a bad connection?
My mokwheel escooter stop taking charge worse part i cant just order new one since there no where to be found? what can i do just throw my brand new scooter to land fill?
Same thing here but the hover board was given to me so I revived the batteries bypassing the bms and the pack shows 40v but the xt60 connector shows 25v so I’m going to desolder and see if it resets.
amazing job, thank you, it coulod have been better if u would have shown the testing of the bms but sill thank you
it worked but since my battery was at 26 volts and I plugged to the outlet to fully charge up it went back to its 2.4 volts and at this point there is no way I can find the same BMS to get it replaced. Thanks for your video.
How did you know what damage to look for on the BMS and what electronic components need soldering/repaired on the BMS?
He checked all the cells for proper voltages and balance. Then he checked the BMS for a short on the input. Then he checked a couple of components FETS, transistors, resistors and then called it good. Must of been a bad connection?
Sure
I have a voltage drop issue on my dualtronmini.which do you think is causing the problem.?thank you
Battery problem.
My mokwheel escooter stop taking charge worse part i cant just order new one since there no where to be found? what can i do just throw my brand new scooter to land fill?
OK if your an electronic genious
Howmany amp of your bms?
My Isin
Alicia s9 pro Bluetooth electric scooter won’t stop beeping even though the charger says charged
hi do you repair batterys
yes
was hoping to learn something beyond unplug it and plug it back in again LOL gg
How much a bms change should cost?
it depend where are you located every country have different prices.
@@SpeciFixx In your country how much would it cost?
With battery pack fully charged @ 40v I only get just over half that from the bms plug. Any ideas?
İt can be bms issue
Same thing here but the hover board was given to me so I revived the batteries bypassing the bms and the pack shows 40v but the xt60 connector shows 25v so I’m going to desolder and see if it resets.
What was the problem
5:43
This was so pointless
I love everything 😍😍😍 !! Get the stats you deserve - P-R-O-M-O-S-M !