Woodturning - Natural Edge Bowl from an Ash Tree Knot
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2024
- This week I'm turning a natural edge bowl out of a knot from an ash tree. I demonstrate how to turn a piece with a very uneven edge, along with some voids and cracks that have to be stabilized. I'm mostly using bowl gouges for the turning and, for the sanding, I show you my approach to power sanding an irregular piece. This video includes both actual speed and time lapse footage, along with some commentary along the way.
If you want to skip to a certain part, here's a chapter list:
00:00 Intro and project overview
01:46 Shaping outside of bowl
14:50 Hollowing
27:24 Sanding
32:28 Removing the tenon
34:53 Oiling and wrap-up
Thanks for watching! Feel free to ask any questions in the comments below. Also, let me know if there's a certain project you would like to see in a future video!
#chadeames #woodturning #woodart #howto
--- Purchase My Artwork ---
Interested in purchasing a turning from one of my videos? Find them in my Etsy store, or send me a message if you don’t see the piece you’re looking for. Lots of other unique woodturnings are available there, as well!
My Etsy Shop - chadeameswoodworks.etsy.com
--- Social Links --- Follow me on…
Instagram - / chadeameswoodworks
Facebook - / chadeameswoodworks
Website - chadeames.com *Subscribe to my newsletter*
--- Starbond CA Glue ---
Get the Freshest CA glues on the market at Starbond
Use Code CEWW15 at checkout to save 15% OFF on your purchase
www.starbond.com/?rfsn=462752...
--- Disclaimer ---
My videos and descriptions may include affiliate links. If you click the link or use my promo code, I may receive a small commission on the sale at no extra cost to you.
--- Attention ---
Please note, my videos are for entertainment only. They are simply demonstrations and are NOT intended to be instructional. Proper training and experience are essential before attempting to use any woodworking equipment. Do not attempt projects or techniques that are beyond your skill level or your comfort level! Serious accidents can happen in an instant and bandaging wounds or sitting in an emergency room is much less fun than woodturning. You are always responsible for your own safety. The only rules are: 1) Be careful; 2) Have fun. - แนวปฏิบัติและการใช้ชีวิต
![Woodturning - Osage Orange Natural Edge Bowl [with Scorched Rim]](http://i.ytimg.com/vi/8qkUBsE74H8/mqdefault.jpg)
![Woodturning - Osage Orange Natural Edge Bowl [with Scorched Rim]](/img/tr.png)
![Woodturning - Yellow Box Burl Cap [Jewelry Dish]](http://i.ytimg.com/vi/r8LDLthOLFo/mqdefault.jpg)
An example of difficult work excellently done. Thank you.
what a beauty.
Just awedome.
The thinness of the walls, makes it look as delicate as a piece of china!👍
Very nice, superior design. I liked the real time turning. For those that want a shorter vid they can fast forward. Great turning!
Glad you liked it! I've been trying to mix things up a bit with the real time vs. time lapse. Thanks!
This turned out beautifully Chad! Well done, my friend!
- Seth
Wow that came out really nice.
Love the shape and grain patterns in this unique bowl, Chad. As always, you captured the natural character of the wood. Stunning! Thanks!
Glad you enjoyed it! Thanks for always watching and sharing your thoughts!
Another awesome piece has character and real nice grain well done Chad
Thanks, Rich!
A work of art!
well done chad i am a long time admirer of your work.
Thank you so much, Barbara!
Very artistic!
Outstanding, Chad! I like the burl type wood that was turned thin. That ash knot wood was harder than my head and must have taken quite a while to turn.
I have a couple of mesquite burls that I want to turn, but I need a lathe with a bigger swing. I don’t want to chop off any of the burl so that it will fit on my 12” lathe.
Yeah, ash is another one of the woods I strongly prefer to turn green because it is so hard when dry. I've never turned mesquite.
I currently have a 68 pound ash burl from a client that I'm hoping to get at least 3-4 nested bowls from. I was waiting for my new lathe, so I can make it as large as possible. However, first, I have to practice some with my new McNaughton coring system. I've watched a few videos and practiced a little, but it'll definitely take more practice!
@@ChadEamesWoodWorks
Mesquite is one of those funny woods because you don’t know what it will do. It is a hard wood that makes beautiful turnings. But it can also be very brittle when really dry and will fly apart without notice. If you see cracks in the wood, it’s best to either eliminate them by cutting away or filling with a resin. CA glue I would not recommend for the repair in this instance. But, that’s my own opinion.
I had a very good friend who was more like a father figure as I was growing up. He was killed turning a piece of mesquite in a very odd / freak accident. A pice of mesquite pierced his face shield and imbedded itself in his neck. He bled to death in just a few seconds since the jugular was severed and he lost consciousness quickly. I happened to be visiting out in Southern New Mexico where I own land and his wife directed me to his workshop where he was turning wood. I found his body on the floor and had been dead about 30-45 minutes. He was 93 years young and still farmed 600 acres of pecan orchard.
When he was killed, the lathe was spinning at about 1300 rpm and probably much faster than the wood could withstand.
So, when it come to turning mesquite, I have my reservations due to my memory of finding him five years ago. When I see turners working with the wood, I am quick to warning them that it can be a very temperamental wood. There are lots of turners who never have problems and love the wood. My opinion is based on the single event I encountered and deeply imbedded in my memory.
But this has not stopped my desire to turn the burls I have in my shop.
OMG! That must have been horrifying and traumatic. I'm sorry about your friend and the whole awful experience. I'm kinda at a loss for words after reading that.
Early in my turning endeavors, I had two minor lathe accidents including one where I passed out briefly in my shop. Luckily, they were very minor injuries (one was a splinter of lignum vitae embedded under my fingernail while sanding, which I pulled out with needle nose pliers before losing consciousness). After that and a couple of pieces breaking on the lathe (including one where half a bowl literally stuck in my ceiling), I developed a habit of not standing in the line of the spinning bowl whenever possible and I never let observers stand there either. I'm also more careful with sketchy wood or wood with inclusions, since that was one of the early culprits. It can be easy to forget how quickly and violently accidents can happen - but I won't be forgetting your story anytime soon.
Another beautiful piece of work. You did indeed find some great figure inside the wood. Well done Chad.
Thanks, Doug! It’s always fun to discover what’s inside an ugly chunk of wood.
Really nice bowl. I turned a smaller bowl like this years ago and it was like turning a buzz saw.
Yeah the natural edge ones can seem pretty intimidating if you’re not used to them. Thanks for watching!
Turned out beautiful!!
Enjoyed your video and I gave it a Thumbs Up
Many thanks!
Like your work you do a great job just to say hi from Florida
Hello there! Thanks so much for watching!
Very cool piece Chad!
Thanks so much!
Wow, that came out gorgeous Chad.. When you put it on the lathe, I didn't have much hope but you "turned" it into something special.. If I could offer any constructive criticism, it would be to shorten the video, cut it in half as 37 min is too long.. But incredible results...!
Thanks! Don't worry, I'm a professional; I know what I'm doing... hahaha... 🤣 The reason you're seeing this video is because I screwed up the project I intended to post (after about 4 hours of recording) and couldn't bring myself to finish it... yet. It was a hollow form and I went through the side of it. 🤬 I might try to salvage it. This video is really a couple months old, just never released. Thanks for the feedback on the length. I'm experimenting to see if it has an effect on which parts people watch and the total watch time. 🧐 😁
Hi Chad -- your piece turned out really well. Delicate cuts over those holes! What kind of oil do you use?
Thanks! I use a 1:1:1 mix of BLO, polyurethane, and mineral spirits for the vast majority of my turnings. It's similar to danish oil.
Well Done Sir! Beautiful piece of work/art. Quick question -- I have noticed that you don't apply the oil while the piece is still on the lathe, is there a reason for doing it that way?
I don't want to sound like I am criticizing your process, because I am not, just curious.
Thanks, Joel! I've never really thought about it before... I guess the reason I don't oil on the lathe is because I usually don't oil the piece until I've signed it, which means I've already removed the tenon. So, I guess my answer is "no specific reason, just how my process has worked out over the years." I typically apply 3-4 coats of oil over the course of a week, so more often than not, I'm oiling things off of the lathe anyway. If I were to make an argument for it, I'd say it's easier to see the piece and any flaws (and to get the oil in all of the nooks and crannies) when it's not on the lathe. Thanks for the question... it's good to self-evaluate sometimes!
That is a beautiful piece. What kind of oil did you use as the finish?
Thank you! I used danish oil on it.
The walls look so thin wont it break if its dropped?
No, it’s pretty unlikely. Wood is surprisingly strong even when thin.
Hey Chad. Your helmet. Is that the Axminster apf 10 and do u like it
No, it’s the Powercap from Peke safety and I absolutely love it.
@@ChadEamesWoodWorks is it heavy as in make your neck hurt after a while looking downward.
Not to me. I was a little concerned about that but I actually forget to take it off sometimes. It was so clear and comfortable that the first time I used it I flinched when the shavings flew at me. 😂 I can turn in it all day long. The only little thing is that my sinuses dry out after wearing it for a few hours.
@@ChadEamesWoodWorks thanks Chad. I appreciate the info. I gotta get one. Man I really enjoy watching and every time I do I all way learn something new. You always do awesome work. Thank ya.
Thanks for the kind words! I’m glad to hear you find my videos helpful!
What size is the bowl gouge your using?
I used a few different bowl gouges on that one - 1/2", 5/8", and 3/4", I think. The 5/8" is my go-to gouge for general purpose use. Thanks for watching and subscribing!