𝗔𝗺𝗮𝘇𝗼𝗻 𝗔𝗳𝗳𝗶𝗹𝗶𝗮𝘁𝗲 𝗟𝗶𝗻𝗸𝘀 Tub Spout Slip-On geni.us/YGIJMj Tub Spout Threaded geni.us/fXqYHD Tub Spout Universal geni.us/k6rzp Strap Wrench geni.us/BBJ34KD Disclosure: Pros DIY is an Amazon Associate. We earn a small commission from qualifying purchases through our affiliate links at no additional cost to you.
What do you suggest for finding a good replacement. I always have issues with the diverter(?) getting stuck either to the shower or tub. It takes less than 1 year before it sticks.
Thank you so much for this video. I didn’t even need to purchase the brass pipes because my pipe was long. I replaced it in less than 15 minutes and I’m a 69 year old woman. Now I can add plumber to my resume!🤪
Wow! Who would have thought replacing a tub spout would be as easy as this? I always feared it would require major plumbing work. Thanks for this tutorial video!!
Thanks. Very thorough and professional. I watched a vid of a weekend handyman/non-plumber do the install and yours is far more thorough. Although he did recommend buying a pizza during the install which was very helpful.
I like you. I'm a Handy Ma'am and I could have seen how to do this logically. BUT you, my man helped me to make sure it was done right, especially with the gaskets. Thank you.
It is very clear understanding even if no English country user. My tenant broke the spout but i cannot find plumber today cause Thanks giving . I am so lucky to find your video. Thank you so much❤ and HAPPY THANKS GIVING 🎉
You are the man, Ive been putting off replacing these basic componenets because I really didnt want to spend a few hours fumbling around and figuring it out. This is clean, concise and easy to understand. Thank you.
Excellent video covering both types of bath tub spouts. Especially liked his smoothing the end of the copper pipe and lubricating the channel of the new spout in order to increase its longevity. Thanks for your assistance.
I had troubles of replacing the bathtub spout. After watching your video and trying your technique, it is done! The section of your explanation of the differences of thread and slip-on is very helpful. Your technique of removing the bathtub spout is great. A wonderful video to help me getting my job done. Thank you!
Excellent information and instructions. I've been an engineer for 40 years, and thought all spouts were threaded. Glad to learn about the set-screw type, or I'd have been trying to turn the current spout off, causing damage. I'll be able to make this replacement in about three minutes now. Much appreciated.
5:03. What a simple solution to clean caulking. The painter's tape. You've taught such an invaluable tip. I know it's a simple thing, but every person loves a clean caulk and this small tip can change the entire appearance of any project. Thank you. I envy your caulk.
Another pro-tip, is to PUSH the caulking gun, not DRAG the caulking gun. When you caulk your bathtub, countertops, baseboards, etc, this will give you long, clean, perfect caulk lines every time... and no tape required.
Thank you very much. I got a tub spout slip-on style that is starting to twist and turn on its own with a tight set screw. So it looks like it's time for me to buy a new one, take it apart and work on getting this straightened out. That's what 12 years and 5 kids will do.
great tip - not to engage the diverter while the water is running so as not to wear to that washer... that is exactly what we would do and the reason my spout needs replacing.... this is a great video
Thank you for a thorough yet succinct demonstration! I bought a new spout last year because my diverter wasn't working properly. Lots of corrosion inside the old spout. I did not install the new one yet but instead filed down the corroded parts of the old one. Seemed to work fine, but I've noticed lately that I have to file every couple of days LOL. I've been a little nervous to change out the whole thing but I think I'm going to do that next weekend thanks to the confidence you gave me! PS-- love the bonus tip you gave-- that the shower diverter should disengage on its own when the water is turned off; never push it while the water is running.
Thank you for this idea. Everything worked out fine.The tip about just turning off the water was cool. Never thought about it. I had to gave my family a lesson. But I was just 2-3 cm off between the spout and tile even after tightening the spout to its fullest. I sealed it pretty well. Looks good.
Helpful video. If you are not a plumber or a handy man, replacing a deflection is not a simple job, I tried this myself 3 times in 2 homes. Leaking 1st time, frustrating 2nd time, took me all day to figure out 3rd time.
I just want to say Thank You for the video. I replaced my bathroom faucet with ease. I did need the recommended grease, but once I used that the faucet glided on with ease. 😊
Thanks for the guide I had to replace a rusty one from our house that's been corroded. Simple fix and shows different models that's on the market. good stuff.
Thank you for making this video. Idk much about plumbing so this was very helpful. I do know however that you aren't supposed to use more than one thin layer of Teflon tape. Was taught that by a forensic engineer who specializes in water loss (washer, dishwashers, sinks, toilets, showers, etc)
@@gabriella2682 not great, but by no fault of the video, I ended up buying both types because I felt a cut out where the screw should go, but when it came time to unscrew I couldn't find one. So I get a strap & hesitantly unscrewed it. Which worked, but when I went to screw the new one on it didn't fit. There was some weird coupling that I couldn't get off, looked rusted in place? I bought wire brushes & wd40 that said wouldn't stain my tub but did. Nothing worked, so I had to call someone after all. But if there wasn't all the extra bs, It would've only taken me 10 minutes. 🤷🏼♀️
Just going through watching do it your self video's for fun and see different methods. This was well done, I would add that the Teflon tape should not go on the first thread. It can be cut and cause a clog in your piping. you should also tighten each joint independently. and where possible use a back up. (something to keep the previously tightened joints from moving. the reason for this is to keep a uniformed tightness of the fittings). seems minor but it is important. lastly. If you cut the pipe. be sure to debur the inside as well as the outside. not deburring the inside creates a turbulent flow which escalates erosion. Although I added some points to this the overall of this video is exceptional and appreciated.
Very informative and great advice about slip on spout easier to remove when there are issues with Diverter spouts. Having a tough time removing a threaded spout.
These instructions were great. I replaced one slip-on spout following them and I think it went fine. I just went to replace my other spout with a different kit and it was a bit more involved. I don't think it had an o-ring. It had me put a small piece that the set screw was attached to first, then a compression ring, then a longer piece with a threaded end. After tightening all of those and the set screw I had to put teflon tape on the threaded end and screw the faucet on. I'm guessing this kit was more oriented to thread-on systems and this was basically an adapter.
Nice video. Thank you. The one thought I have is that it's possible the spout you're removing is a universal spout, in which case it could actually have been installed as a screw-on, but the presence of the set screw will make you think it's a slip-on. So, you could be tugging outward and/or turning it clockwise in error as you try to remove it. So, to me it makes sense to only turn it counter-clockwise during initial removal if it has a set screw, unless and until you're absolutely sure it really is a slip-on.
thank you. my New faucet is just pop out during shower... I was installed by a.. professional plumber(I paid). My new faucet type is 2nd one without any thread. I will try to tighten screw in the bottom tonight. Thank you so much for this video!!!! you save my day.
I had to use WD-40 to get my tub drain stopper out yesterday, not even the full drain. I think someone had misthreaded it putting it in. Then there was so much hair it prevented it from fully twisting to come out. I'm renting so just cleaning it, but Im going to soak it in vinegar before putting it back, maybe it'll thread correctly when I put it back if I have to clean it again before I move.
Thank you, I plan to do this on Friday. I watched your other video too on replacing the drain, so I will be doing both. My diverter is broken on my facet, and my drain, the cover of it is very rough to touch because I used a harsh cleaner that I should not have. But I noticed the black ring around it, that is probably the washer installed wrong. As far as the facet on your tub being high, I bet they put it that high to prevent little kids hitting their heads.
Just removed the slip on and it looks like there is a leak? Water just keeps coming thru? I do need to replace the handle. Cause I can only tighten it with wrench. Is that why it’s leaking?
I changed my spout out after I tried to repair the diverter by putting in a new gasket but the inside was too rough to make a reliable seal. Fortunately I have the slip on type so it was an easy fix requiring only a hex key to get it done. I much prefer the type of diverter which is in the shower valve as it is more reliable. I have one of those rubber strap type wrenches that I got for about $1 at a yard sale. I hope to be able to use it someday.
Having the spout that high is great for having small rambunctious kids take a bath. I remember giving myself a black eye when I was 3 due to the spout being at the standard height.
personally, I have very specific desires when I take a bath. I take long baths and like to refill the HOT water periodically in my bath. So having access to the the faucet etc is KEY for me. Also my old house the hot and cold were reversed on the single handle.. which is NOT CODE, I realize that but I LIKED that because then I could just trickle the hot water which was a better arrangement
𝗔𝗺𝗮𝘇𝗼𝗻 𝗔𝗳𝗳𝗶𝗹𝗶𝗮𝘁𝗲 𝗟𝗶𝗻𝗸𝘀
Tub Spout Slip-On
geni.us/YGIJMj
Tub Spout Threaded
geni.us/fXqYHD
Tub Spout Universal
geni.us/k6rzp
Strap Wrench
geni.us/BBJ34KD
Disclosure: Pros DIY is an Amazon Associate. We earn a small commission from qualifying purchases through our affiliate links at no additional cost to you.
What do you suggest for finding a good replacement. I always have issues with the diverter(?) getting stuck either to the shower or tub. It takes less than 1 year before it sticks.
@@charleshodgdon6168yt
Awesome thank you the dam cli
P I guess word out so a faucet new is convienient
the high tub spout is popular with old people, this way they do not need to bend over to turn it on/off...
Thank you so much for this video. I didn’t even need to purchase the brass pipes because my pipe was long. I replaced it in less than 15 minutes and I’m a 69 year old woman. Now I can add plumber to my resume!🤪
Way to go lol
You gave me hope lol. I'm going to try
@@julieg1561 you got this. I showed my daughter how to replace hers. She was so proud of herself!
I'm 66 and am needing to do this. Also the handles. Nervous, but he makes it seem much less difficult.
@@susangroom960 I was just talking about this yesterday. We don’t need to pay a plumber for the simple things!
Wow! Who would have thought replacing a tub spout would be as easy as this? I always feared it would require major plumbing work. Thanks for this tutorial video!!
Clear instructions, clear visuals, no bull, up to the point. Thanks!
Thanks. Very thorough and professional. I watched a vid of a weekend handyman/non-plumber do the install and yours is far more thorough. Although he did recommend buying a pizza during the install which was very helpful.
😂
I like you. I'm a Handy Ma'am and I could have seen how to do this logically. BUT you, my man helped me to make sure it was done right, especially with the gaskets. Thank you.
Exactly what I needs. Explained everything, clear image and audio, and to the point. Thanks!
It is very clear understanding even if no English country user. My tenant broke the spout but i cannot find plumber today cause Thanks giving . I am so lucky to find your video. Thank you so much❤ and HAPPY THANKS GIVING 🎉
Seriously, that's one of the best "how to" video I've seen in a long time; precise and to the point and you seem to do the job thouroughly. Thanks.
I watched 5 videos on tub faucet swaps, and this was easily the most comprehensive. Thank you!
You are the man, Ive been putting off replacing these basic componenets because I really didnt want to spend a few hours fumbling around and figuring it out. This is clean, concise and easy to understand. Thank you.
Same here! It’s a great video
@@FMcrow020it'll still take US a few hours
@@nivekgad got it done in about an hour an a half
Excellent video covering both types of bath tub spouts. Especially liked his smoothing the end of the copper pipe and lubricating the channel of the new spout in order to increase its longevity. Thanks for your assistance.
I had troubles of replacing the bathtub spout. After watching your video and trying your technique, it is done! The section of your explanation of the differences of thread and slip-on is very helpful. Your technique of removing the bathtub spout is great. A wonderful video to help me getting my job done. Thank you!
This gives me even more hope! Thank you for sharing!
I think the dough plus the tape is overkill, but it’s a good and cheap precaution. Alcool, blue tape. Very professional. I love this. No short cuts.
Excellent information and instructions. I've been an engineer for 40 years, and thought all spouts were threaded. Glad to learn about the set-screw type, or I'd have been trying to turn the current spout off, causing damage. I'll be able to make this replacement in about three minutes now. Much appreciated.
I have 0 plumbing experience. I did this successfully with no issues. I can’t believe how much easier my faucet turns. Thank you sir!
Thank you. After watching this video, I was able to remove and replace my faulty tub faucet and it's working great now. Much appreciated.
Did you have to cut off the water source first?
I have the daunting task of needing to replace my faucet due to a faulty diverter. This video has given me the confidence I need!
I didn't know a slip on was an option. Thankful I found this video since I was very confused how to replace my faucet.
No one has mentioned why you only silicone the top half in countless videos I’ve watched ! Thank you ❤❤❤❤❤❤❤
He said because if there is ever a leak insude you will see water come out from thw bittom portion
5:03. What a simple solution to clean caulking. The painter's tape. You've taught such an invaluable tip. I know it's a simple thing, but every person loves a clean caulk and this small tip can change the entire appearance of any project. Thank you. I envy your caulk.
Another pro-tip, is to PUSH the caulking gun, not DRAG the caulking gun.
When you caulk your bathtub, countertops, baseboards, etc, this will give you long, clean, perfect caulk lines every time... and no tape required.
Teflon tape
Easy to follow!!!! Thanks for not making this job super complicated.
Thank you very much. I got a tub spout slip-on style that is starting to twist and turn on its own with a tight set screw. So it looks like it's time for me to buy a new one, take it apart and work on getting this straightened out. That's what 12 years and 5 kids will do.
Thank you for explaining the types of spouts at the beginning! Excellent video
Simple to the point and easy to understand covering all major things to watch out for.
great tip - not to engage the diverter while the water is running so as not to wear to that washer... that is exactly what we would do and the reason my spout needs replacing.... this is a great video
I came here to hear him say "spout." 😁 Seriously, a very helpful video. Thanks for sharing this with us! 😊
"Spoat"
Thank you for a thorough yet succinct demonstration! I bought a new spout last year because my diverter wasn't working properly. Lots of corrosion inside the old spout. I did not install the new one yet but instead filed down the corroded parts of the old one. Seemed to work fine, but I've noticed lately that I have to file every couple of days LOL. I've been a little nervous to change out the whole thing but I think I'm going to do that next weekend thanks to the confidence you gave me! PS-- love the bonus tip you gave-- that the shower diverter should disengage on its own when the water is turned off; never push it while the water is running.
Thank you for this idea. Everything worked out fine.The tip about just turning off the water was cool. Never thought about it. I had to gave my family a lesson. But I was just 2-3 cm off between the spout and tile even after tightening the spout to its fullest. I sealed it pretty well. Looks good.
You make it look so easy and it is not for us average person. Thank you for your explanations on how to do it.
Helpful video. If you are not a plumber or a handy man, replacing a deflection is not a simple job, I tried this myself 3 times in 2 homes. Leaking 1st time, frustrating 2nd time, took me all day to figure out 3rd time.
Thank you so much. I had a slip on that was so tight. I thought it was threaded. Your very helpful video has allowed me to triple check myself.
Great explanations. Looks easy. I need to do this at home tonight. Hope its as easy as you show.
Very detailed and slow enough to follow and understand, better than most videos seen
thanks for a very instructive video. I like to play plumber so here's hoping I took good notes.
Awesome, no time wasting, just getting down to business.
Great video, easy to follow, and was able to do this on my own replacement as a result. Thanks!!
Excellent, straightforward explanation and instructions. Thank you for making replacement seem easy.👍🏼
I just want to say Thank You for the video. I replaced my bathroom faucet with ease. I did need the recommended grease, but once I used that the faucet glided on with ease. 😊
Thank you so much for your video! My husband was able to disconnect the spout because of your directions! Thank you!
Thank you for making this video and showing me how to do this.
You look comically tall in that shower, however, I know all showers are just...small. Your video saved me thousands. Thank you
You're really good at this and with some obvious plumbing experience too. Great video.
Best video that I have seen for replacing Tub Spout.
My tub spout is so badly damaged. I can't wait to try these tips.
Thanks for showing both options. Great video
Thanks, need to replace my wife's grandmothers spout. Didn't know there where two different types, so now I know what to buy.
I was about to spend $200 for someone to do it, but you just encouraged me to do it myself. Thank you;
Thanks for the guide I had to replace a rusty one from our house that's been corroded. Simple fix and shows different models that's on the market. good stuff.
This guy makes knows his stuff, he makes it look easy!
Love this no nonsense straight to the point video, not a plummer but just need to know! Thank you for sharing!
Thank you, took me a pry bar to get it off and a 3/4 to 1/2 adapter but at least I knew what to expect with your video (+70 years old sprout)!
Great video. You made it seem so easy. Better then the other videos I watched.
!!OUTSTANDING VIDEO!!! COVERS ALL THE BIG AND SMALL SPECIFICS AND GREAT VIDEO TECHNIQUE. MANY THANKS!!!
THANK YOU. I DID IT MYSELF!! So cool. Sooooo happy. Ahhh I wish I could send you pics.
Thank you so much for this video! I was easily able to replace my broken tub spout!
A round of applause for this information. On my way to Lowes after unscrewing my spout. Well done bud!
Thank you for making this video. Idk much about plumbing so this was very helpful. I do know however that you aren't supposed to use more than one thin layer of Teflon tape. Was taught that by a forensic engineer who specializes in water loss (washer, dishwashers, sinks, toilets, showers, etc)
rashafella - Good info on using only one thin layer of Teflon tape; people can go crazy with the stuff.
yes , one thin layer , or you get leaks
great help. Thank you for helping DIY guys save plumbing costs!
This was super helpful. We're having an issue with the water not switching to shower. I hoped the replacement would be so easy!
Thank you! I needed this today. This woman is going to now study plumbing!
Thank you very much for all this information this will save me time and money from a plumber doing it for me
Thank you for taking your time to make this detailed and precise video.🙏💕
Thank you very informative I'm gonna have to watch it again. Your way more help than anybody I could find in home depot.
Turned out like a professional work, thank you for saving me the big bucks.
This video was incredibly helpful, informative & to the point. I feel very confident I can replace my own tub spout now.💪🏻
Thanks for posting ⭐⭐⭐⭐⭐
How did it go?? I want to do mine!
@@gabriella2682 not great, but by no fault of the video, I ended up buying both types because I felt a cut out where the screw should go, but when it came time to unscrew I couldn't find one. So I get a strap & hesitantly unscrewed it. Which worked, but when I went to screw the new one on it didn't fit. There was some weird coupling that I couldn't get off, looked rusted in place? I bought wire brushes & wd40 that said wouldn't stain my tub but did. Nothing worked, so I had to call someone after all. But if there wasn't all the extra bs, It would've only taken me 10 minutes. 🤷🏼♀️
Just going through watching do it your self video's for fun and see different methods. This was well done, I would add that the Teflon tape should not go on the first thread. It can be cut and cause a clog in your piping. you should also tighten each joint independently. and where possible use a back up. (something to keep the previously tightened joints from moving. the reason for this is to keep a uniformed tightness of the fittings). seems minor but it is important. lastly. If you cut the pipe. be sure to debur the inside as well as the outside. not deburring the inside creates a turbulent flow which escalates erosion. Although I added some points to this the overall of this video is exceptional and appreciated.
Very informative and great advice about slip on spout easier to remove when there are issues with Diverter spouts. Having a tough time removing a threaded spout.
Thank you so much for this! Replaced an spout using this video yesterday & it went great.
Great video with lots of information and clear instructions. Wonderful production quality, too! Thanks for making this!
This video made my replacement go smoothly and it was so easy. I was dreading getting a plumber in as well as DIY. Thank you for this DIY video.
Fantastic! Very detailed at an easy to understand level. Thank you!
These instructions were great. I replaced one slip-on spout following them and I think it went fine. I just went to replace my other spout with a different kit and it was a bit more involved. I don't think it had an o-ring. It had me put a small piece that the set screw was attached to first, then a compression ring, then a longer piece with a threaded end. After tightening all of those and the set screw I had to put teflon tape on the threaded end and screw the faucet on. I'm guessing this kit was more oriented to thread-on systems and this was basically an adapter.
Good video, glad I got to see this before I replace my tub spout this weekend.
wow you are well-organized and prepared- the strap wrench is a good idea for new spouts
Tip: best to caulk where the pipe meets the wall the case of a faulty diverter splashing water back into that hole. Had to learn the hard way...
Thank you very much. Nice the way you took the time and showed each step. I'm very appreciative.
Why protect a throw away spout?
Nice video. Thank you. The one thought I have is that it's possible the spout you're removing is a universal spout, in which case it could actually have been installed as a screw-on, but the presence of the set screw will make you think it's a slip-on. So, you could be tugging outward and/or turning it clockwise in error as you try to remove it. So, to me it makes sense to only turn it counter-clockwise during initial removal if it has a set screw, unless and until you're absolutely sure it really is a slip-on.
thank you. my New faucet is just pop out during shower... I was installed by a.. professional plumber(I paid). My new faucet type is 2nd one without any thread. I will try to tighten screw in the bottom tonight.
Thank you so much for this video!!!! you save my day.
Cool, Looks same as mine, Thanks the link for Tub Spout.
Just the information and demonstration I needed. Tub spout replacement, here I come! :) Thanks.
I wish things came off as easy as these videos make it look, my tub spout refuses to budge, and no I'm not turning it the wrong way.
I had to use WD-40 to get my tub drain stopper out yesterday, not even the full drain. I think someone had misthreaded it putting it in. Then there was so much hair it prevented it from fully twisting to come out. I'm renting so just cleaning it, but Im going to soak it in vinegar before putting it back, maybe it'll thread correctly when I put it back if I have to clean it again before I move.
Do you turn the water main to the house off while you replace the faucet?
i feel like i can jump right in there tomorrow and change the faucet BY MYSELF!! Thanks!
Thanks for the tip of using the tape before the silicone!
VERY NEAT AND INFORMATIVE, I LEARNED A LOT FROM THIS.WELL DONE.
Thank you for showing both....
Thank you, I plan to do this on Friday. I watched your other video too on replacing the drain, so I will be doing both. My diverter is broken on my facet, and my drain, the cover of it is very rough to touch because I used a harsh cleaner that I should not have. But I noticed the black ring around it, that is probably the washer installed wrong. As far as the facet on your tub being high, I bet they put it that high to prevent little kids hitting their heads.
Just removed the slip on and it looks like there is a leak? Water just keeps coming thru? I do need to replace the handle. Cause I can only tighten it with wrench. Is that why it’s leaking?
Very informative and easy to follow video presentation. Just replaced two elements in my master and guest bathroom.
Thank you so much for this very informative, easy to follow instructional video.
Thanks buddy, very professional 👍 my next step is follow your instructions ,I know I'll be successful.
I changed my spout out after I tried to repair the diverter by putting in a new gasket but the inside was too rough to make a reliable seal. Fortunately I have the slip on type so it was an easy fix requiring only a hex key to get it done. I much prefer the type of diverter which is in the shower valve as it is more reliable. I have one of those rubber strap type wrenches that I got for about $1 at a yard sale. I hope to be able to use it someday.
Great video. Now I can do it myself. Thank you for putting this out.
Great video for this old lady DIYer. Thanks! 🙂
wow - very impressive - even I can understand - I am gonna try and will let you know how it goes! Thanks much!!
Thank you! You saved me about $200... Very helpful!
Thanks for the video. I'm going to try this in my daughter's bathroom. Got some matte black hardware to install.
Having the spout that high is great for having small rambunctious kids take a bath. I remember giving myself a black eye when I was 3 due to the spout being at the standard height.
personally, I have very specific desires when I take a bath. I take long baths and like to refill the HOT water periodically in my bath. So having access to the the faucet etc is KEY for me. Also my old house the hot and cold were reversed on the single handle.. which is NOT CODE, I realize that but I LIKED that because then I could just trickle the hot water which was a better arrangement
@@caelidhg6261 Makes good sense if you’re an empty nester. I’m the same way, long hot baths continuously filling with hot water. The best!