Simple DIY Knife Makers Vise | Knife Making Level 01

Making a Simple Knife Holder AKA Knife Makers Vise.
This Easy DIY Knife Project is versatile, low cost and quick to make, this first version should allow me to:
Work on Full Tang Blades, Shape and Finish Knife Handles, Sharpen and Polish Knife Handles and Blades.
This is part 4 of the Level 01 Knife Making Series:
Make a Mini Forge From a Can:
• How to Make a Mini For...
Make a Knife Beveling Jig:
• How To Make a Hand Fil...
Making a Kiridashi From a Broken Bicycle Lock Part 1:
• Making a Kiridashi Fro...
Tools:
5" Vise
Wood Saw
Double cut File 250mm / 10 Inch
Power Drill / Hand Drill
Screwdriver
50 mm Hole Saw
Hammer + Center Punch
Small Wrench
Sanding Paper (80 grit)
Pen Reamer *optional
Clamps
Materials:
Wood Stock 65/65/300mm (2.5/2.5/11 Inch)
Wood Stock 65/65/180mm (2.5/2.5/7 Inch)
2 X Plywood 45/150/15mm (2/6/0.75 inch)
Steel Plate Wood Connector (40/100 mm)
Used Steel Table Leg, 250mm / 51mm Diameter (10"/ 2" D )
50cm of Tree Tie - Nylon Reinforced Rubber Strap (40mm wide / 1.5 Inch)
Double Sided Tape
10 Min Dual Component Epoxy Glue
Black Heat Resistant Spray Paint (any spray paint will do)
Lest over Ikea Flat Wrenches
Various bolts and screws and washers
Boiled Linseed Oil
Let me know what you think in the comments.
Offer Canfi (Taubenfligel)

[@patrickfreeman8816]

As a fellow who doesn't have a welder and a back yard of assorted pipe, i was becoming discouraged.. Your your design is actually able to be built and works beautifully! Thank you so much!

[@tauftools]

Thank you Patrick! I’m glad it helped you out ❤️

[@asafyaacobi7212]

The master, creativity level, insane

[@tauftools]

Cheers mate!!

[@ronilado1573]

Lovin it!

[@tauftools]

Cheers mate! I’ll keep them coming.