SO, with enough solder, no flux, and a never been cleaned iron... There will end up being enough solder (mass) to have it's own gravity. One day I too shall be a professional.
Good video but very ugly soldering. You have to use clean, new components or have to clean wires and pins of the components. We noticed one dry joint while soldering. And when you do such video please make it clean and tidy as the viewers are going to follow you. Anyway thank you for the theory part.
I have collected a copy! -- 2 capacitors 450v - 105, 150k between them to discharge these capacitances,I put them on a diode bridge change, supplied 220 volts from the other ends, put a barrel capacitor 450volt 12mkf from the diode constant to plus and minus, 150k between it for discharge, then put a load current resistance of 100 ohms to the plus of the diode bridge and I connected the LEDs - they just blew up! I looked at the output voltage -- 440 volts constant! YOUR SCHEME IS INITIALLY DIFFERENT FROM YOUR OWN ASSEMBLY! NOW ANSWER ME -- EITHER YOU'RE LYING OR WHAT DID I DO WRONG? LOOK AT YOUR DIAGRAM! -- IT HAS A RESISTANCE OF 100 OHMS TO THE CAPACITOR!What if I had connected to the digital probe? -- he would have burned down!The scheme of Zafer Yaldis (and the comment to him) is almost no different from yours! you measure the output voltage and current consumption! And where is the guarantee THAT YOU ARE APPLYING 220 VOLTS TO THE CIRCUIT? WHY DIDN'T YOU SHOW ANYTHING?
Have you made any mistake while creating this. I only use the parts that apply to this. I have not submitted fake videos. I have submitted this because I made it and it works. Also, it outputs like 120v and the voltage of the light that is connected to it. Aran works
ok nice idea but this kind of transformerlerss PSU is not suitable for all purposes, is dangerous playing with high Voltages and your solderings need a lot of improvement.. Really bro go get a nice soldering iron this is gets hillarious and watching young amateurs shame!!!!!. you may find good solderin irons in the market from few euros. The tip of this soldering iron you use has no more attaching material and the soldering gets painful
I accept what you say When I made this video my soldering machine was not working so I made this circuit with my dc soldering and this is my first video and I will make future videos well.♥️
Brother, your soldering work is very dirty. You should know first how to solder correctly. Then observe electrical safety . Your work is dangerous and it may give you fatal electric shock. I am most religionless .But I love Great Buddha. Please take my rude comment sportingly.
First of all thank you for your comment. This is my first video. My soldering iron was broken so I soldered with another dc soldering iron I had. .I admit that it was not done correctly. But I have fixed that mistake in my other videos
Kaun sa R kahan lage ga, uska W kya ho ga, PF network (cct) me shock ka khatra part ka -- +,direction etc batana zaroori hota hai. Soldering nahi ho pa rahi thi to kuch high W ka iron use karte ya jab V badhta tab shoot karte. Cct achha hai. Blessings.
the voltage source is galvanically connected to the network, it is life-threatening.
SO, with enough solder, no flux, and a never been cleaned iron... There will end up being enough solder (mass) to have it's own gravity. One day I too shall be a professional.
Good video but very ugly soldering. You have to use clean, new components or have to clean wires and pins of the components. We noticed one dry joint while soldering. And when you do such video please make it clean and tidy as the viewers are going to follow you. Anyway thank you for the theory part.
Ok thanks your comment❤️
Output to ek hi milega. Phir itna sara cheej kaise chalega
It is work
මට මේ cuircuit එකෙන් 48v fan ekak weda karanna puluwn weida.(200 mili ampiyar)
You could sell this kind of video as art in west . One love
මට මේ cuircuit එකෙන් 48v fan ekak weda karanna puluwn weida.(200 mili ampiyar)
yes
How much amp output?
Current intensity
Good
Thanks
отрорвите ему руки гениально насрал
Output DC mein kitna value ka resistor lagaya hai
Poor soldering technique
Can’t see any of your videos, please point me to the direction of your work. 😅
Lol. He solders a joint of 3 leads, 4 times, and then can still move 1 of the leads by touching it.
для этого дела флюс надо!
Lujhe 2.5v ke lamp ki 5o bulb ki series ka driver banana hai PF circuit bataye
Good video
Thanks
🌼
❤
❤
❤
I have collected a copy! -- 2 capacitors 450v - 105, 150k between them to discharge these capacitances,I put them on a diode bridge change, supplied 220 volts from the other ends, put a barrel capacitor 450volt 12mkf from the diode constant to plus and minus, 150k between it for discharge, then put a load current resistance of 100 ohms to the plus of the diode bridge and I connected the LEDs - they just blew up! I looked at the output voltage -- 440 volts constant! YOUR SCHEME IS INITIALLY DIFFERENT FROM YOUR OWN ASSEMBLY! NOW ANSWER ME -- EITHER YOU'RE LYING OR WHAT DID I DO WRONG? LOOK AT YOUR DIAGRAM! -- IT HAS A RESISTANCE OF 100 OHMS TO THE CAPACITOR!What if I had connected to the digital probe? -- he would have burned down!The scheme of Zafer Yaldis (and the comment to him) is almost no different from yours! you measure the output voltage and current consumption! And where is the guarantee THAT YOU ARE APPLYING 220 VOLTS TO THE CIRCUIT? WHY DIDN'T YOU SHOW ANYTHING?
Have you made any mistake while creating this. I only use the parts that apply to this. I have not submitted fake videos. I have submitted this because I made it and it works. Also, it outputs like 120v and the voltage of the light that is connected to it. Aran works
Draw a model of what you have made on a paper and name it and comment a picture
❤
❤
❤
ok nice idea but this kind of transformerlerss PSU is not suitable for all purposes, is dangerous playing with high Voltages and your solderings need a lot of improvement.. Really bro go get a nice soldering iron this is gets hillarious and watching young amateurs shame!!!!!. you may find good solderin irons in the market from few euros. The tip of this soldering iron you use has no more attaching material and the soldering gets painful
I accept what you say
When I made this video my soldering machine was not working so I made this circuit with my dc soldering and this is my first video and I will make future videos well.♥️
@@wtfix8301 then my friend wish you the best for you and your try....
Thanks my brother 🤗♥️
🌼
Yeah, nah.
Amp kitna dega output
❤
U r weak at soldering.
🙄
it is work
🌼
🌼
🌼
මරු මරු 🤩😃
👍
Well done.
Thanx 😘
🌼
🌼
🌼
🌼
❤
❤
Super
Super
Good
❤
🌼
🌼
🌼
❤
Super
𝙂𝙊𝙊𝘿 𝙫𝙞𝙙𝙚𝙤😃
What's the value of that output resistor?
420 ohm 1w resistor
❤
❤
🌼
❤
❤
My cooking channel-youtube.com/@wkitchen-oi9oz?si=s0j3mQGhgORoZEKH
❤
❤
Good vidio 👍
Brother, your soldering work is very dirty. You should know first how to solder correctly. Then observe electrical safety . Your work is dangerous and it may give you fatal electric shock. I am most religionless .But I love Great Buddha. Please take my rude comment sportingly.
First of all thank you for your comment. This is my first video. My soldering iron was broken so I soldered with another dc soldering iron I had. .I admit that it was not done correctly. But I have fixed that mistake in my other videos
24 volt ka circuit kese bavave
❤
❤
❤
❤
❤
❤
❤
❤
❤
❤
❤
❤
❤
❤
❤
Elm❤️
thank you
😘😘😘😘
🌼
♥️🌷♥️Aap ko tajurbay ke Jarurat hai.If you don't mind OK🌷🌷
Thanks
සුපිරි ❤️😇
😘
Kaun sa R kahan lage ga, uska W kya ho ga, PF network (cct) me shock ka khatra part ka -- +,direction etc batana zaroori hota hai. Soldering nahi ho pa rahi thi to kuch high W ka iron use karte ya jab V badhta tab shoot karte. Cct achha hai. Blessings.
❤
Irrelevant and noisy Play black hate that
👍👍
Brother ye max kitne watt dega ?? Dc fan ko lganai k loyea bnana h any tip ?
¿Cuanto tiempo tarda en tostar los leds para poderlos tomar con un café con pastas?
Your video is encouraging but it does not give the Output voltage, amperage, wattage etc; and applicable objects.
that is because he does not know
GOOD VIDEO
muy buen video gracias
Thanks brother 😘
Good vedio
Super vedio
схема работает лайк и подписка однозначно .хорошая работа.
😍😍💪
Bina regulator ke
variable voltage milega kaise
Is it possible to operate with 12 battery with relay connection
👍
Superb
Thanks 🤗
up ka work bad