You could also take a different set of shock towers, clip off all unnecessary parts and bolt the modified towers to the towers that are bolted to the chassis. You won't gain any additional room under the battery tray but it is a lot easier than making a new chassis.
I bought a set of portals on AliExpress from BDXRC they are pretty nice hope they hold up. Question, the set I bought has spiral ring and pinion. Is there a set of non spiral ring and pinion gears that is compatible? I don’t like the spiral gears so i will be hopefully replacing the front and rear. If I can’t replace them I guess I’ll underdrive the front and rear to 24t front and rear. I don’t know why but the ones I have in a set I have has 33-8 front and rear but the front is giving me issues it hangs up rear is fine no issues.
Great, competent review Sir. I'd add, with Chinese parts, it's probably worth just tightening bolts and dry run the car for a bit before starting to replace bolts to stainless. Some parts can be utter garbage, snap right away, and it might not be worth all that work. Better make sure they hold up first.
Hello great speaking, i think i can see a cran on the right side of your axle Can you send me the link of the replacing joints for this crawler ? Thanks for responding me
Hello, here you go: € 7,31 30%OFF | Heavy Duty Universal Front Rear Joint Axle CVD Drive Shaft Dogbone Portal Output Gear For 1/10 Axial SCX10 Metal Portal Axles a.aliexpress.com/_mqpEL75
![Warhammer 40k: Space Marine 2 | เพื่อจักรพรรดิ ! [ตอนเดียวจบ]](http://i.ytimg.com/vi/4M0ckYMA4-U/mqdefault.jpg)
My Portal axles are manufactured by Shimonda, and include bearings on the steering....$117 US(!)
Nice
You could also take a different set of shock towers, clip off all unnecessary parts and bolt the modified towers to the towers that are bolted to the chassis. You won't gain any additional room under the battery tray but it is a lot easier than making a new chassis.
Hi.
You did very nice work. I am thankful for your informations. I have got the same problem with the higher position of the weight.
Greetz✌️
ferm bak, word mijn volgende ride!
I bought a set of portals on AliExpress from BDXRC they are pretty nice hope they hold up. Question, the set I bought has spiral ring and pinion. Is there a set of non spiral ring and pinion gears that is compatible? I don’t like the spiral gears so i will be hopefully replacing the front and rear. If I can’t replace them I guess I’ll underdrive the front and rear to 24t front and rear. I don’t know why but the ones I have in a set I have has 33-8 front and rear but the front is giving me issues it hangs up rear is fine no issues.
Sell the chassis you designed to people great informative video thanks for sharing
Great, competent review Sir. I'd add, with Chinese parts, it's probably worth just tightening bolts and dry run the car for a bit before starting to replace bolts to stainless. Some parts can be utter garbage, snap right away, and it might not be worth all that work. Better make sure they hold up first.
How did you like this portal axle? Can I change the angle of the caster?
nice tip 6:20
My rig lost 50% the speed after im using this axel..what can i do to make it faster..
beautiful, you had to modify the chassis?
Hello great speaking, i think i can see a cran on the right side of your axle
Can you send me the link of the replacing joints for this crawler ?
Thanks for responding me
Hello, here you go: € 7,31 30%OFF | Heavy Duty Universal Front Rear Joint Axle CVD Drive Shaft Dogbone Portal Output Gear For 1/10 Axial SCX10 Metal Portal Axles
a.aliexpress.com/_mqpEL75
@@jellevandeplas thanks a lot m'en
Brass bushing
🥰🤩💥💯👍👏
What body is that?
Injora hard body
Just seeing this. You should had titled it SCx10 CLONE. There is nothing on it that is from Axial