Dude! I have been searching for information all night and now it is 10am. FINALLY! I found someone that knows how to make wiring these simple! Ok, really though. You have the absolute hands down best information available. I have a set of strip lights no model # but I can see the 151 and 331 resiators and 50/50 leds but no model # so I know they are analog, but want to be able to change the color to attract different types of fish. I have been trying for literally over 10hours for someone that knows how to wire them with and within the first 3 min of your video You answered every single question I have! I don't understand why your video is not the highest viewed highest ranked LED info video. New sub and thumbs up thanks for the info. You da man. I even searched the mfg website for info but they obviously don't support analog any longer ao they simply don't cross reference the model # with any controller. Now I know I can ditch them and go buy a cheap controller on Amazon.
Thanks man, took me the whole Internet to see how these worked before finally finding this vid. Well explained I can set mine up without gettin electrocuted or settin a fire. Thanks again bud ;)
Finally, after having 2 strips with only Red & Black connectors and 2 controllers with remotes, I have wondered how to connect them. Now I know, I didn't need the controller because I only bought 1 colour per strip (1 blue, 1 red). Opps, my bad. I just tested them on a battery and voila, good to go. Thanks for this video, soo soo very helpful.
i read so much bad stuff about the omymo LED strips its insane. mine was delivered perfectly, it lacked a manual but its pretty self explanatory so it didnt bother me. ive been using the 5m strip for about a week now, id say 2 or 3 hours per day and it works perfectly. even the remote works really well and i can controll the LED strip from inside my bed, distance from bed to controller is round about 6 meter id say. glad i copped myself some. love it.
I plan to hook this type of LED lights to my boat. I assume I can use the black power cord in your video that looks like it was cut off from an adapter. BTW, thee video is the best one I've found! Thanks
@5:34 I am wondering on battery common is a negative but when you connected to controller, you connected comment to a positive. I have various RGB ribbons all has positive common( although - is engraved on its end connector but that is just to match correctly with the female end which also has - but outputs positive supply.
Thanks a lot this was very helpful. Can u make a video about led lights cob,smd,chips(whatever they call them) Im in a plan to make diy led light for my planted aquarium but im not sure how to connect them.Use one or more drivers cuz i was thinking to go like 4 lines x10 leds,4 colors:w-white,c-white,red and blue. Cheers
would be fabulous if you could walk us through connecting the Sylvania Mosaic LED lights together, without paying a small fortune floor the extension kit. ;)
Hi so I need some help I want to install LED lights in my stairs I have 15 steps I just want 1 led strip on each side and I want to use a motion detector to activate the lights can you please help me and tell me what to get
İ hope you'll help me ... I have 7.5m rgb strip and I know that I need at least let's say 10A adaptor but my problem is my controller gives 6A max output ... So is useing 10A useless and I can use the 5A one or what
Common is ground not positive and the LED light strips are negative switching not positive there's always 12volts when unit is switched on and the negative controls the LEDs color and brightness
I just bought nine 16ft govee led strip. I'm new to the led community these strips added up to 216 Watts is it possible to connect all 9 strip together with one 350 Watts power supply or do I need more than one power supply? I have a 144ft of ceiling to run these led lights Thanks.
Deffo getting the RF controller! At the mo I just got it soldered to the car battery 😂👌 was working but now I have one green light at the start of the led strip? What is this causes by???
I've had mine for about a week now. I bought three my PC one runs great my living room runs great.. Downside is the one power adapter blue within the first five minutes I had it set up so I had to remove my other living room one and replace it for this one. Took the power adapter apart and didn't notice any burn or loose solder I don't know what happened and a replacement one is $10.. I guess two out of three isn't bad. I was hoping to find more information about the power supply and see if anybody else had any problem with it.
I'm trying to find out if I can use one power supply for the whole house and with long connectors because i don't want to put lighting all around the house. Please reply asap thank you. If you know how to and you have to purchase something please also send the links.
im a bit confused still. i have an RGBW controller which will have the colored wires put into one end. The other end of the Controller has an entry for an input wire shown @ (50 sec), and the input wire i have has 3 wires coming out of its opposite end (2 reds/Positives and 1 black/ground/negative). i assume these 3 wires are needed to be connected to some sort of power supply? if so, where exactly it the LED boards i have need to run on 12V.
Hello I a have the rgb (4wire) led lights. I have approximately 1200 leds(12v-5amps per string. 300 per string) I hooked them up in a row. When I plugged them in. They were brilliant for the first string then each string got fuller until the last string you could barrel see them. So I bought a 12v 60amp power supply. Plugged them in and no change! What am I doing wrong.
i want to use rgb controller for single color led as rgb controller has music sync option...i need help onn wiring whether i can take three wire join them to gether and plug in each rgb or have too use only one out of 3
But wont it effect the controller? More led strips draws more current and the controller just isn't made to hold that much current..... Correct me if I'm wrong
my question is how the hell does the led strip stick to the tv the 3m sticky crap only stayed in place for 10 minutes and then fell off ,is there a way outside of gluing it to the tv???
I got this rgb lincsys it listed for 12.99 with discount only 7.99 it works great one fault blue button is red and blue button on the controller. I ordered it by accident wasnt what I want I installed a HUE Plus and none of the light strips work one strip has a green light. 4 bad ones.
helpfull tutorial but would be even better if you wont cut topics you started, example single color strip connecting to RGB controller and several others in this video, overall great effort that benefit many novices
I have a 1200 watts amp in my car and I want the led to pulse on the bass. Is it possible to use these controller and connect them to the subs for the power source ? or will that blow the controller/led strip.
Great video, I definently like this setup. Would you be able to provide the specifications for that silver power supply and the RF Controller. I specifically want to know what the maximum current they can provide is. I wan't to run roughly 30-48 feet of LED's, so I believe that I am going to need at least a 6A inverter. Another question, can you hook the RF Controller directly up to the power supply? Lastley, would you be able to provide a link just tell me where you bought the silver power supply and the RF controller. Again, great video.
About how much do you have to spend if you want to get a 5m led strip working. Right now everywhere I look the RF modules and power supplies cost both 50$+.
i have a 12v 50 amp 600 watt power supply . how many 5 m reel of the 6803 led lights can i put together in one line. meaning .. putting them all together in line
Great video! Thanks for posting. Got a question: can 1 zone controller control and connect 2 strings that go in opposite directions (10m each direction (2x5m rolls), which is total of 20M)? Just want to make sure it's ok to connect and control it like that. I'll have 3 others used in other places with less length. Please advise.
Hello Good Job .. You Explain so So Good ... None English Language Guy Like me Can Understand you Easily Thanks ! I Bought a Cheap RF WIFI LED Controller For 5Metter 5050 RGB LED .. I tryed To TEST it with 12V 1A Adapter .. But It Get Overheated And Not Working Anymore ... I Have Question .. I want Bought The Touch One You showed On That Video ( it GOT White Touch Control - Cheaper Than Black Version ) ... I can Use It Safely On CAR ? i Want Put a 10A Fuse On The Wire Way ... And The Main Question Is .. I can connect 5 Metter 5050 RBB LED with One Controller ?
I don't know if you can help, But i got an LED kit, and everything is wired up. but I am having problem with the colours. When it's set to RED the light is an Orange colour, Blue is a lighter shade of blue (closer to a Teal colour) When i have white selected and i lower the brightness it will start changing to green, the lower the brightness set the greener it gets but the actual brightness does not change. And when I turn off the unit with the remote, it changes to green and doesn't actually turn off. To me it seems that the unit is associating brightness with intensity of green but I am by no means trained or confident in my diagnosys.
I have 5m ws2812b led strip . Why i cant run it without a led driver. I have 5v 40 amper power supply but It cant work? Can I work it without led driver? If not why? thanks
If i'm installing a 20m rgb strip in the roof in my apartment and there ocures dimming can i insatll a small psu at the other end of the strip and if so will i need another rf reciver/controller at the other end so that i may still turn the LEDs on and off? or should i just use a big psu at the one end? Would apreciate some help :)
So i have put these around my deck, the one that is connected the the power source is fine but the other three strips that i cut are only doing the colour green, any way to fix this??
lakshmi prabha go to a electronics store n tell them youd like lithium gleicouse 1054 batts (they look like double A batt but little bit bigger )then solider pos to neg pos to negitive on 3 of them this will give u 12 volts dc but wont run for many hours but will light up
That depends on how long strips you have. The max output current is printed on the controller. (Mostly it is 3Amps at 12volt) . That is called parallel connection.and a single stip is also a parallel connection providing 12 volts to every set of 3 leds in a series with a resistor.
+حمود س ا what kind of strip ? a good 5050 led stip (60 led/m) uses 15 watt / m. www.aliexpress.com/item/16-4ft-5M-300-leds-SMD-5050-RGB-LED-Strip-IP65-Waterproof-12V-Flexible-Light-strip/32323331707.html 20 meter * 15 = 300 watt. so you need a power supply from at least 300 watt www.aliexpress.com/item/Free-Shipping-LED-Adapter-Power-supply-12V-300W-25A-Non-waterproof-use-for-5050-or-3528/1872264284.html?spm=2114.031010208.3.2.u53OW0&ws_ab_test=searchweb201556_2,searchweb201527_1_71_72_73_74_75,searchweb201560_1 a cheap rgb ir controller can only do 72 watt (and its a peace of crap) a little bit les cheap 2.4 ghz controller can do 216 watt. www.aliexpress.com/item/16-4ft-5M-300-leds-SMD-5050-RGB-LED-Strip-IP65-Waterproof-12V-Flexible-Light-strip/32323331707.html a rgb extender is rated for also 216 watt. www.aliexpress.com/item/DC12-24V-24A-Led-RGBW-Strip-Amplifier-6A-x-4-Channel-Output-Led-RGBW-Strip-Power/32250203095.html?spm=2114.031010208.3.2.klX0ic&ws_ab_test=searchweb201556_2,searchweb201527_1_71_72_73_74_75,searchweb201560_1 i would go for the rf 2.4 ghz (power strip 1 & 2 to this) , 300 w power suply, and the extender for controlling strip 3 & 4
Oskars Lapsa i over rxe in a triangle this tip can also be reversed to give u 6 differant math formulas for electrical use volts x load equalls amperage needed
Question: I have an RGBW strip that runs 12V DC (or AC) with an IR Sensor like the first one you connect (white with pins). I'm trying to hook them up in my car. They turn on but they only show blue and the IR sensor won't respond to commands. It works just fine with the wallplug inside my house. I'm thinking it's an power problem. What would you suggest to fix the problem?
DO i need extra watts for my rgb controller or not this is not explained anywhere at all. If i buy power suply do i need to count the rgb controler or not wtf
When setting up multiple light strips (7 separate strips each 4' Long with a distance between strips of 4' ), is it best to wire in Parallel or in Series?
Whether you connect 4 strips back to back or start all four from a controller point, it is in a parallel connection either way. When back to back , farthest led suffers a voltage drop so it is better to start all ships from the controller point.
![[TH] 2024 PMSL SEA Finals D2 | Fall | ต้องรักษาฟอร์ม อย่ายอมให้ใครแซง](http://i.ytimg.com/vi/x38QsGn7A3M/mqdefault.jpg)
This video taught me exactly what i wanted to know before purchasing thank you!
Dude! I have been searching for information all night and now it is 10am. FINALLY! I found someone that knows how to make wiring these simple! Ok, really though. You have the absolute hands down best information available. I have a set of strip lights no model # but I can see the 151 and 331 resiators and 50/50 leds but no model # so I know they are analog, but want to be able to change the color to attract different types of fish. I have been trying for literally over 10hours for someone that knows how to wire them with and within the first 3 min of your video You answered every single question I have! I don't understand why your video is not the highest viewed highest ranked LED info video. New sub and thumbs up thanks for the info. You da man. I even searched the mfg website for info but they obviously don't support analog any longer ao they simply don't cross reference the model # with any controller. Now I know I can ditch them and go buy a cheap controller on Amazon.
Thanks man, took me the whole Internet to see how these worked before finally finding this vid. Well explained I can set mine up without gettin electrocuted or settin a fire.
Thanks again bud ;)
Same!!! :)
Hey no sweat Pal, just so long as you're above the LEDs sport!
Thank you ! You help me to fix the led on my car I was about to buy new ones and thanks to the video I didn't
Finally, after having 2 strips with only Red & Black connectors and 2 controllers with remotes, I have wondered how to connect them. Now I know, I didn't need the controller because I only bought 1 colour per strip (1 blue, 1 red). Opps, my bad. I just tested them on a battery and voila, good to go. Thanks for this video, soo soo very helpful.
Thank you for this video. It’s very helpful! There’s not many other videos that will even explain this.
This video taught me exactly what I needed to know. THANK YOU FOR POSTING!!
i read so much bad stuff about the omymo LED strips its insane. mine was delivered perfectly, it lacked a manual but its pretty self explanatory so it didnt bother me. ive been using the 5m strip for about a week now, id say 2 or 3 hours per day and it works perfectly. even the remote works really well and i can controll the LED strip from inside my bed, distance from bed to controller is round about 6 meter id say. glad i copped myself some. love it.
I need this done to my whole house
Great video. Thanks for making this
Great video! It covers pretty much everything you might have trouble with
Thanks for the quick vid. Planning to LED light my motorcycle helmet, need all the tips I can get.
I plan to hook this type of LED lights to my boat. I assume I can use the black power cord in your video that looks like it was cut off from an adapter. BTW, thee video is the best one I've found! Thanks
Good video for led controller operation
Thanks for the guide, very helpful.
What are the two white buttons at the top uses for on the cr2025 remote
Loved this. Very informative. I wanted multicolor rainbow ones until I found out you have to do some fancy computer coding thing to do it 😩
this is what i was looking for, only 1 thing though, too much shaking but great explanation tutorial :) keep it up
if you look closely at the plugs the both have arrows that you line up for polarity.
Good information, Thanks.
Thank you for instructions
@5:34 I am wondering on battery common is a negative but when you connected to controller, you connected comment to a positive. I have various RGB ribbons all has positive common( although - is engraved on its end connector but that is just to match correctly with the female end which also has - but outputs positive supply.
Thanks a lot this was very helpful.
Can u make a video about led lights cob,smd,chips(whatever they call them)
Im in a plan to make diy led light for my planted aquarium but im not sure how to connect them.Use one or more drivers cuz i was thinking to go like 4 lines x10 leds,4 colors:w-white,c-white,red and blue.
Cheers
would be fabulous if you could walk us through connecting the Sylvania Mosaic LED lights together, without paying a small fortune floor the extension kit. ;)
Hi so I need some help I want to install LED lights in my stairs I have 15 steps I just want 1 led strip on each side and I want to use a motion detector to activate the lights can you please help me and tell me what to get
İ hope you'll help me ...
I have 7.5m rgb strip and I know that I need at least let's say 10A adaptor but my problem is my controller gives 6A max output ... So is useing 10A useless and I can use the 5A one or what
Common is ground not positive and the LED light strips are negative switching not positive there's always 12volts when unit is switched on and the negative controls the LEDs color and brightness
nice tutorial.
I just bought nine 16ft govee led strip. I'm new to the led community these strips added up to 216 Watts is it possible to connect all 9 strip together with one 350 Watts power supply or do I need more than one power supply? I have a 144ft of ceiling to run these led lights Thanks.
Im still having trouble on the DIYs. The color is white and I can’t same anything to DIY 1,2,3,4,5 or 6
Deffo getting the RF controller! At the mo I just got it soldered to the car battery 😂👌 was working but now I have one green light at the start of the led strip? What is this causes by???
I've had mine for about a week now. I bought three my PC one runs great my living room runs great.. Downside is the one power adapter blue within the first five minutes I had it set up so I had to remove my other living room one and replace it for this one. Took the power adapter apart and didn't notice any burn or loose solder I don't know what happened and a replacement one is $10.. I guess two out of three isn't bad. I was hoping to find more information about the power supply and see if anybody else had any problem with it.
thx 👍great video
I'm trying to find out if I can use one power supply for the whole house and with long connectors because i don't want to put lighting all around the house. Please reply asap thank you. If you know how to and you have to purchase something please also send the links.
If you are using more than 5 meters or something 12V will not work, you will need a better power supply if you are using a large amount of LED Strips.
just ordered a 5metre kit on eBay, if I want more sets of 5 metres attached, will the 12v power be enough for extra lengths attached?
I have the same question. Thank you.
im a bit confused still. i have an RGBW controller which will have the colored wires put into one end. The other end of the Controller has an entry for an input wire shown @ (50 sec), and the input wire i have has 3 wires coming out of its opposite end (2 reds/Positives and 1 black/ground/negative). i assume these 3 wires are needed to be connected to some sort of power supply? if so, where exactly it the LED boards i have need to run on 12V.
Hello I a have the rgb (4wire) led lights. I have approximately 1200 leds(12v-5amps per string. 300 per string) I hooked them up in a row. When I plugged them in. They were brilliant for the first string then each string got fuller until the last string you could barrel see them. So I bought a 12v 60amp power supply. Plugged them in and no change! What am I doing wrong.
Can you bury the rf controller behind the wall?
i want to use rgb controller for single color led as rgb controller has music sync option...i need help onn wiring whether i can take three wire join them to gether and plug in each rgb or have too use only one out of 3
But wont it effect the controller? More led strips draws more current and the controller just isn't made to hold that much current..... Correct me if I'm wrong
my question is how the hell does the led strip stick to the tv the 3m sticky crap only stayed in place for 10 minutes and then fell off ,is there a way outside of gluing it to the tv???
I got this rgb lincsys it listed for 12.99 with discount only 7.99 it works great one fault blue button is red and blue button on the controller. I ordered it by accident wasnt what I want I installed a HUE Plus and none of the light strips work one strip has a green light. 4 bad ones.
I have the first tipe of cord and it does not work and the string or whatever you pulled is not able for me to pull, can you help me?
I have join 20meters of led lights together and using power supply with 200w still can't work.pls advice
helpfull tutorial but would be even better if you wont cut topics you started, example single color strip connecting to RGB controller and several others in this video, overall great effort that benefit many novices
Wanting to connect multiple strips for a car. How would I do this for trunk engine bay and interior
I have a 1200 watts amp in my car and I want the led to pulse on the bass. Is it possible to use these controller and connect them to the subs for the power source ? or will that blow the controller/led strip.
Great video, I definently like this setup. Would you be able to provide the specifications for that silver power supply and the RF Controller. I specifically want to know what the maximum current they can provide is. I wan't to run roughly 30-48 feet of LED's, so I believe that I am going to need at least a 6A inverter. Another question, can you hook the RF Controller directly up to the power supply? Lastley, would you be able to provide a link just tell me where you bought the silver power supply and the RF controller. Again, great video.
Is there anything else you can use to test what the 12v wire is besides a battery
About how much do you have to spend if you want to get a 5m led strip working. Right now everywhere I look the RF modules and power supplies cost both 50$+.
i have a 12v 50 amp 600 watt power supply . how many 5 m reel of the 6803 led lights can i put together in one line. meaning .. putting them all together in line
where can I find extra pins, I got a kit and it came with no pins to connect the wires together with.
Can i use a big power supply in a school bus for powering lots os led strips
What battery type goes in the remote!?? I didnt get one with the remote. I bought Type N, and they dont fit
Can I use a 12volts UPS battery (or 12V Li-ion Rechargeable battery Pack + AC Charger ) to power it instead of the power connector given with it ??
What if I have a 12 volt battery pack. Like a Duracell 12 v so I can make an LED suit. Would that still work?
Great video! Thanks for posting.
Got a question: can 1 zone controller control and connect 2 strings that go in opposite directions (10m each direction (2x5m rolls), which is total of 20M)? Just want to make sure it's ok to connect and control it like that.
I'll have 3 others used in other places with less length.
Please advise.
Hello
Good Job ..
You Explain so So Good ... None English Language Guy Like me Can Understand you Easily Thanks !
I Bought a Cheap RF WIFI LED Controller For 5Metter 5050 RGB LED .. I tryed To TEST it with 12V 1A Adapter .. But It Get Overheated And Not Working Anymore ...
I Have Question .. I want Bought The Touch One You showed On That Video ( it GOT White Touch Control - Cheaper Than Black Version ) ... I can Use It Safely On CAR ? i Want Put a 10A Fuse On The Wire Way ... And The Main Question Is .. I can connect 5 Metter 5050 RBB LED with One Controller ?
using 20m led strip can u tap both 10m strip at the same time on RF controller to get stable lights (no dimming)?
Can we install this in the car under the fooywell
If I'm using a larger power supply is it possible to control more than 5 stips with one RGB controller?
My LED strip has only 3 outputs... What should I do?
This video amezing good
you think ill have enough power if i solder the power and neg to the points on my xbox one motherboard.
I don't know if you can help, But i got an LED kit, and everything is wired up. but I am having problem with the colours.
When it's set to RED the light is an Orange colour, Blue is a lighter shade of blue (closer to a Teal colour)
When i have white selected and i lower the brightness it will start changing to green, the lower the brightness set the greener it gets but the actual brightness does not change.
And when I turn off the unit with the remote, it changes to green and doesn't actually turn off.
To me it seems that the unit is associating brightness with intensity of green but I am by no means trained or confident in my diagnosys.
+VauganizerHD pls check if your color of lights wire is connected right
I have 5m ws2812b led strip . Why i cant run it without a led driver. I have 5v 40 amper power supply but It cant work? Can I work it without led driver? If not why? thanks
Power supply detail for 20m rgb led strip
Thanks :)
You guys should provide some links to these items.
how many led strip i can add to IR CONTROLLER ( i know u mentioned i but u mentioned it on rf controller time )
If i'm installing a 20m rgb strip in the roof in my apartment and there ocures dimming can i insatll a small psu at the other end of the strip and if so will i need another rf reciver/controller at the other end so that i may still turn the LEDs on and off?
or should i just use a big psu at the one end?
Would apreciate some help :)
how do u get the power supply (small black 1) seperately?
I'm installing these in my car is there anyway to have more than red blue and green
so if you wire it straight to the car battery it wont mess up?
Fucking ricer
Not if he does to like his sound system no one said neon lights under a car...
i have the 3a version of the power supply and if i touch it it shock me
Can I plug it into my subwoofer?
I have 5 wires on my led strip. No help... :(
What pin connector is that called?
my rgb control/remote doesn’t work how should i fix it
So i have put these around my deck, the one that is connected the the power source is fine but the other three strips that i cut are only doing the colour green, any way to fix this??
+Melanie Gooch its probarly a bad conection r (red) and B (blue) between stip one and two
what gauge connecting wire?
Nice
common is ground but it's labeled as 12+?
I would like to use LED strips for dress . may i know the compact battery for it??
lakshmi prabha go to a electronics store n tell them youd like lithium gleicouse 1054 batts (they look like double A batt but little bit bigger )then solider pos to neg pos to negitive on 3 of them this will give u 12 volts dc but wont run for many hours but will light up
I have a question can I solder 4 different strips together will it effect the dimness?
That depends on how long strips you have. The max output current is printed on the controller. (Mostly it is 3Amps at 12volt) .
That is called parallel connection.and a single stip is also a parallel connection providing 12 volts to every set of 3 leds in a series with a resistor.
what is tha machine called that he uses to test the four wires to tell the r g b common
+MrThechump a car battery
hi
plz how i connect 4strips 5 meter per one (20meter) what i need and wich power supply i need
thanks
+حمود س ا what kind of strip ?
a good 5050 led stip (60 led/m) uses 15 watt / m.
www.aliexpress.com/item/16-4ft-5M-300-leds-SMD-5050-RGB-LED-Strip-IP65-Waterproof-12V-Flexible-Light-strip/32323331707.html
20 meter * 15 = 300 watt.
so you need a power supply from at least 300 watt
www.aliexpress.com/item/Free-Shipping-LED-Adapter-Power-supply-12V-300W-25A-Non-waterproof-use-for-5050-or-3528/1872264284.html?spm=2114.031010208.3.2.u53OW0&ws_ab_test=searchweb201556_2,searchweb201527_1_71_72_73_74_75,searchweb201560_1
a cheap rgb ir controller can only do 72 watt (and its a peace of crap)
a little bit les cheap 2.4 ghz controller can do 216 watt.
www.aliexpress.com/item/16-4ft-5M-300-leds-SMD-5050-RGB-LED-Strip-IP65-Waterproof-12V-Flexible-Light-strip/32323331707.html
a rgb extender is rated for also 216 watt. www.aliexpress.com/item/DC12-24V-24A-Led-RGBW-Strip-Amplifier-6A-x-4-Channel-Output-Led-RGBW-Strip-Power/32250203095.html?spm=2114.031010208.3.2.klX0ic&ws_ab_test=searchweb201556_2,searchweb201527_1_71_72_73_74_75,searchweb201560_1
i would go for the rf 2.4 ghz (power strip 1 & 2 to this) , 300 w power suply, and the extender for controlling strip 3 & 4
I live in Tunisia can I buy one ?
Will more ampers output of the RF controller burn the led strip?
No
how do you knof if you need 12v 2amp or 6amp power supply for 2x1m lenghts ? what is the math there? I could not find any info on that.
Oskars Lapsa i over rxe in a triangle this tip can also be reversed to give u 6 differant math formulas for electrical use volts x load equalls amperage needed
Oskars Lapsa I OVER R X E,,,,, (I/R X E)this is a good tip to remember ok
My Remote doesn't work. I have checked the battery and all i find? Help please.
same as me
Christ you made this way Moe complicated than it is
Question: I have an RGBW strip that runs 12V DC (or AC) with an IR Sensor like the first one you connect (white with pins). I'm trying to hook them up in my car. They turn on but they only show blue and the IR sensor won't respond to commands. It works just fine with the wallplug inside my house. I'm thinking it's an power problem. What would you suggest to fix the problem?
Leds don't run on AC
@@BomJimmy yes, I know. The power adapter is AC to DC converter. I just mean that they're sold to be used in the house on an AC to DC adapter
DO i need extra watts for my rgb controller or not this is not explained anywhere at all. If i buy power suply do i need to count the rgb controler or not wtf
My remote won’t work no matter what I try
where are you buy
can i run a 12v led strip using my 12,000 mah 5v battery bank?
+Bricklinsv1970 I don't think that equals 12v
+Bricklinsv1970 no, 12,000 is the capacity of the batterybank.
+Melvin i ha to get a step up power converter 5v to 12v and it worked good
Can you plz show how to install and rgb led strip on an Xbox 360
people Solder does on.
0:49 where can i buy one pleasssss reply im looking everywhere but can find 1
I have LOADS of these spare controllers - Ill send you one if you pay postage (I live in UK) you will need to buy for your LED strip though x
When setting up multiple light strips (7 separate strips each 4' Long with a distance between strips of 4' ), is it best to wire in Parallel or in Series?
Whether you connect 4 strips back to back or start all four from a controller point, it is in a parallel connection either way. When back to back , farthest led suffers a voltage drop so it is better to start all ships from the controller point.