Making Clear 350Z taillights (Making clear taillight lenses from scratch)
ฝัง
- เผยแพร่เมื่อ 30 มิ.ย. 2023
- LIKE, SUB, COMMENT
Instagram: _thatdirtyz...
Tiktok: / _thatdirtyz
Merch:
• Ukiyo - Skyline | Vlog...
• [FREE] DaBaby Type Bea...
HOKAGE6
my-store-2aed27.creator-sprin...
Build it for you:
www.redbubble.com/i/t-shirt/B...
Music:
• Chill Day - Lakey insp...
• Old School Hip Hop Vlo...
• [FREE NO COPYRIGHT BEA...
• Upbeat Hip Hop Backgro...
• Cool Motivational Hip ...
• Funky Upbeat Hip Hop B...
• Energetic Hip Hop Back...
• Uplifting Hip Hop Back...
• Asian Hip Hop Backgrou...
• Upbeat Hip Hop Backgro...
• Cool Hip Hop Backgroun...
Sexy sax Alex productions
• 😙 Vlog & Happy Lofi (M...
• 🎵 Chillhop Lofi Beats ...
• H5 audio DESIGN - Look...
• Trap Hip Hop Backgroun...
• FAYZED - NO CAP - Boom...
• Future, Trap, Motivati...
• Hard Trap Beat - $UICI...
• Powerful Trap Beat - E...
• lost found - soloftt x...
• 🐾 LoFi Chillhop No Cop...
• Video
• [No Copyright Music] C...
• [Non-Copyrighted Music...
• Pieces - After The Fall
• [Non-Copyrighted Music...
• [Non-Copyrighted Music...
• Blue Wednesday - '90s ...
• High Rule - Control (I...
• Joakim Karud - Waves (...
• ROYALTY FREE Inspiring...
• Alex-Productions - PIS...
• SickDope - Middle Fing...
• A.T. - The Smoke [Copy...
• Satara - Execution [Co...
• Turbo - Bandit [Copyri...
• (no copyright music) l...
• serenity - lofi hip ho...
• Netrum - Pixie Dust | ...
/ gqg0rs7h-y1
• astral planes - Exodus
• Audiovista - Kick It
• Bioject & Jurgaz - Inf...
• DayFox - Crushed Heart...
• GENES x memphis. - ETE...
• LoudTech - Chill | Chi...
• memphis. - 9 eleven
• Palm Fires - Internet ...
• Naruto Shippuden - SAI...
• Video
• Mafia Music (Free Jazz... - ยานยนต์และพาหนะ
![[UNCUT] ลูกหมี-ลิลลี่ เหงียน เปิดใจฟาด ปู มัณฑนา I คนดังนั่งเคลียร์ I 15 ก.ค.67](http://i.ytimg.com/vi/FKQ60Y7bJ6s/mqdefault.jpg)
Need this done to my 1st gen g35 sedan . They came out 🔥 bro
Thanks man! Appreciate that 🙌
Congrats on the beautiful 350Z ... looks amazing!!!
About the stops, leave the top glass, it will help you shape the acrylic sheet. and if you have an oven big enough to heat it you just put it on top and it will take shape. It is also possible to outline it roughly, say 1 inch above the edges (this will reduce the size of the acrylic sheet)
You need an ultrasonic cutter, you will cut it perfectly, both it and you will be able to separate the lens from the stopper. Once the brake cover is shaped, you will need a small amount of silicone to seal it, too much will spread it both out and in, which cannot be removed! You are in the right direction about the black painting on the edges of the stop lights. This hides an aftermarket job!
I will be glad to have helped, greetings from Europe! :)
Good to know!
Thanks I appreciate all the info and the comment!!
Thank you 🙏🏽 🤝🏽
That's dope 🔥🔥🔥
Thanks! 🙏🏽🙌
The q50 skyline style clears would be fire for the q50 I have been planning this for while
Honestly I prefer the stocks to the skyline tails 🤷🏽♂️ but either way I agree! Going to be building them next weekend I think
also when use a oven to get the acrylic soft set a time for 8 min at 300 degrees
Thanks for the tip, we thought about using the oven but sadly my oven hasn’t been working for the past month 🥲
Now watch how people gonna jump on this wave you just started something in the Z community 😳🔥
Maybe man!!
Even if not I just wanted to give people a way to build clears for cars that may not have clear options at all! 😁
And I appreciate you commenting 🙌🤝🏽
@@dirtybuildmedia566 true but literally definition of not bought but built, lowkey hyped to see if you try to do clears on the infinity, you got yourself a new subscriber!🔥
@@cyanide1567 Sweet I’ll probably try it out in a few weeks!
Thanks again 🙏🏽
This is not new plenty of people have done this already.
@@STAYIN_ALIVE Only other person I’ve seen do this is Max Kelson.
Every one else either builds them the traditional way or uses a lense/ acrylic thing that has a pattern on it which don’t look like actual clears and is already flexible
Man you just helped me out! You the best! Rare gem!
Glad to hear it! Sorry it took so long to see this comment!
Currently doing this for my secong gen Forester, after the one company that made clears for my tails decided to discontinue making them for good 😭 boutta do the shaping part wish me luck!
Good luck you got! 🙌
Oh im so doing this thats so sickkk
Thanks! 🙏🏽
Definitely have to dremel edges to get those smooth edges and possibly better fitment , you mentioned acrylic I find polycarbonate plexi glass to do better what’s your take ? Great job either way great gem great vid
Interesting I’ll have to try that plexi glass and see 🤔
And thanks man! I appreciate you watching and commenting 🙌🤝🏽
I tried this method but I found it was easier to leave the oem lenses and shape the acrylic over it to avoid warping
We thought about doing that but thought it would make the lenses too big 🤔
Good to know that it works that way too!
@@dirtybuildmedia566 it was just cm over but helped when sealing so the bead wouldn't end all bumpy just trim the excess at the end so it's all smooth but hey you killed it man... makes me wanna hire you to do mine haha don't really have time now
@chrisasaurus thanks I appreciate that! And good to know if I ever do another set haha
Is there any way you can post a video/pictures of how they turned out? I’m debating whether I should do it like you said or how he does it in the video
Hell yeah you guys are goats
Thanks man 🙏🏽
me and my buddy made first in the world SF5 cleartails using the same method we posted a how to video aswell
Nice man!!
when you took out the led housing out of the tailights to repaint them, are you able to remove the bottom reflector to not paint over it?
From what I remember you can, however they are sensitive and don’t come out easy. For mine we didn’t want to risk pulling it out and it snapping so we just painted them
Do you think painting a black border around the inside of the lenses would work? Maybe tape straight lines on the inside edge and paint before sealing. Just a thought though, nice work!
Thanks! And possibly the problem is you have to lay the sealant on the inside so the part you painted will be covered by the sealant and you’ll see the sealant through the lenses instead of the paint :/
Lay the tape before the silicone and pull it for a nice straight edge.
your Z looks pretty nice
Thanks man! 🙏🏽
Hey buddy why you did use the Owen to heat the acrylic to mod the form of the tail
Was an option for sure but I wasn’t sure if that was something I would be able to do with the Q50 tails as well. But you can do it that way too and they will probably come out better.
Hey man! I was thinking about doing this! The leds in the tails are already red right?
Yes sir! They are red already so you won’t need to mess with them at all
@@dirtybuildmedia566 thank you man!!
What kind of black paint did you use? Also, did you spray paint or hand paint?
Spray painted and just gloss black spray paint
Do I have to change the leds on the oem ones or are they still red without the red lense
The bulbs are red not need to change them 😁
I'd just refine it.
What silicone an glass did you use ??
Acrylic sheet
We’re do
U get the acrylic sheets
The Home Depot 🤝🏽
you think you could do this to a 2005 cadillac deville?!
Definitely
What size acrylic sheet did you get??? 🤔
Don’t know the exact size unfortunately we just grabbed the size that looked big enough for two Lens but they sell big ones that you can buy just in case you need tot Ty it a couple of times.
Just make sure your kit grabbing one that’s too thick
@@dirtybuildmedia566 so get the a thick sheet?
@@Yookiid sorry idk why there was so many typos in that first comment 🤣 no grab one that’s large enough to at least do two lenses or more but make sure the sheet isn’t too think or it will be harder for mold. 🤙🏽
@@dirtybuildmedia566 got it! Shit i just started up my lighting business officially so when this pops off i know who im shouting out
@@Yookiid sweet man good luck!!!! 🙌🤙🏽
Are the leds that come in these stock tail lights red already?
Yes sir
@@dirtybuildmedia566 thanks for the reply! Good to know i dont have to by red leds thanks!
@@sheanherrington2016 of course! Appreciate you too if you subbed 🙏🏽
So I’m looking to do this on a 10th gen civic coupe but there’s a lot of really sharp edges on the tails, how was it trying to mold them, do you think it would form around a sharp angle like that?
It’s honestly pretty flexible once heated. Should be able to get it done man!!
Just take it one step at a time
Hey man, I also own a 10th gen coupe. Keep us updated, I’d love to see if it is doable 🙏
Lmao I’m doing the same for mine
where do u buy the bumper?
eBay
i cant find it bro, u have the name of the bumper?
@@dirtybuildmedia566
why don't you do a copy of lens instead of the housing?
If we took the lens off and tried copying it using this method the lens would more than likely crack/snap during the process.
If you mean why not do it to the light while the lens is still on, we did that on my buddy’s 370z there’s a video up of that. For the most part it works doing it that way too!
What body kit is this?
It’s the AMS GT kit mixed with the Rocketbunny fenders and some other bits and pieces. I did a bunch of custom body work and stuff to it to make it all blend together
@@dirtybuildmedia566 thanks so much man
i need clears for my q.
I be making that video soon, so if they come out good you can try it out or I might start doing it for people if they want them done
What was the specs of the acrylic like the thickness
I don’t know the exact specs but we got the thinnest one that we could that was also big enough to do two taillights
There are a lot of people with actual q50 clears
Not true just looks like it. If you zoom in on their photos you can see the lenses are cracked/gone. Again most clears are made by purchasing tails with clear lenses then taking that lens and putting it on top of stock tails. But Q50s only have red and black lenses. There is no OEM or aftermarket tails with clear lenses. So the only way to have a lens for them would be to make it from scratch like these.
not true at all. only way i could get "clears" rn is if i actually break my lenses just to make them look "clear"
the original chrome looked better than the paint imo
I agree but unfortunately one was a little messed up and scrapped up :/
You should have bought the clears and swapped💀
Why do I can be just like everyone else and for them to look the same and pay 3xs as much? 🤓
Thanks for commenting helps the algorithm and makes my views go up! 🫡🤝🏽
Red tail lights looks much better. Clear tail lights look ghetto
Mhm except that a lot of cars come with clear tails stock and red tail lights don’t match ANYTHING on the car and completely throws off the colors.
But thanks for commenting helps the algorithm and makes my views go up! 🫡🤝🏽
am terrible quality sry..
😂 how
They look the exact same dont leak and is wayyyy cheaper.
And your looking at a lense that was made from acrylic which is crazy. And your response is
“TeRrIbLe QuAlItY” 😂😂🤓
Either way Thanks for commenting helps the algorithm and my views go up 😌🫡🤝🏽
Instagram?
@_thatdirtyZ
@@dirtybuildmedia566 I sent you a message via Instagram did you receive?
@@dirtybuildmedia566 message sent
@@dirtybuildmedia566 face book?
@@dirtybuildmedia566 face book?