Care and Feeding the DeWalt DW735 Thickness Planer
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- Get optimum performance from your DeWalt DW735 thickness planer with new blades and a few important maintenance items. This video shows step by step how to change the planer's 3 double-edged knives plus cleaning, lubricating and waxing various parts of the machine. These steps extend the planer's life by reducing friction during use and help minimize 'snipe' on planed boards. A 'care and feeding' session for your DW735 will restore 'brand new' performance of this workhorse in your shop!
Please visit this link to the Next Level Carpentry Influencer's Page at Amazon where there's a list of things to optimize results of steps featured in this video:
a.co/e9lSIGk
Advertising fees paid by Amazon to NLC from any items purchased through links on the Influencer's page will help you with the 'care and feeding' process of your planer and, for no additional cost to you, support Next Level Carpentry... how 'bout THAT... Thank you!!
A down to earth real man, no stupid ham acting, just great technical experience.
Thank you for an excellent comment... I appreciate it so much I'm pinning it to the top of the list because it sums up my vision/goals Next Level Carpentry in one sentence!
The tip on shifting the new blades all as far as they go on one side is brilliant. Easy to overlook, but could save a replacement right there. I can really appreciate someone who takes pride in maintaining their tools properly and using them they way they were designed. Most people abuse their tools and wonder why they fail or don’t produce the results they expect.
Retired aviator here ... 80. Outstanding video. 4.0 production.
Two crits. Not so much upfront background explanation needed. And, 2, spend just a tad more focus on the cutter head detent thing. Watched the vid. Went out to shop, pulled top cover and dust collector, but couldn't get the cutter head to rotate, by hand that is. Came back to your great vid, and found the subtlely mentioned 'detent'. Went back ... worked easily of course. Thank you. Have vid saved and am sure will refer to it in future, when I'm ready to change the cutters. This machine is a miracle. Will never forget the moment I pulled a rough cut stick of cedar, straight from my local sawmill, out of it. Couldn't believe my eyes! It's become a joyous occasion almost, every time I run the planer. I keep thinking each piece is the prettiest piece of wood I've ever seen ... then comes the next. I have an almost endless supply of wood now available because of this machine ... and the fact that I live in the wilderness. Maple, Walnut, Oak, Pine, Black Cherry, old torn-down barn, school, and house woods. Not to mention salvaged pallet woods! But none of that would be useful if I didn't have the DeWalt.. AND ... your excellent assistance in caring for it. It is fairly new and I've been terrifically intimidated by prospects of having to eventually change the cutter blades. I've been dreading it so much, for fear I'd probably seriously damage the machine. After your video, and my little foray today, into just taking the covers off, and cleaning it out? No longer! I've seen the innards, and things aren't nearly as intimidating as before. THANK YOU .... great job with this video! Complex, great machine ... but you made caring for it sooo much easier now. Do take care.
Every video production is a series of decisions on what to put in, how much and what to leave out. Glad you found help with a simple re-watch... there's something about just getting a peek inside a machine for a better idea of what to expect. Thanks for sharing anecdotes and glad to know you're enjoying your planer so much! Best, Matt
@@NextLevelCarpentry ... thank you, Matt! Yes ... I do much better usually, with hands/eyes on mechanical stuff. That was the really great asset your video provided -- seeing what's behind all those heavy duty covers! My best to you ....
As someone new to using this kind of machinery, I want to thank you for putting your great experience and knowledge into everything I have watched so far on your channel. All this is valuable and gives me the confidence that I can use and service the equipment I get do produce the results I want. Your love of woodworking shines and is a pleasure to watch. It is rare to find someone willing to pass on their hard earned knowledge these days and I look forward to watching many more of your videos. And as far as the quality of your videos goes, this is far better than many of the videos I have watched before finding your channel.
I agree , very well put!
No need to apologize for editing of this excellent video. Lots of good tips. Concise and to the point. Really enjoyed watching.
Thanks Terry... I think I'm getting better with the editing part but always appreciate comments like yours from viewers who are able to look past production shortcomings and see value in information in the video. Best, Matt
I've searched high and low for a video on this planer. Relatively new to woodworking so the pace and attention to detail throughout was absolutely perfect! I couldn't care less about "production quality" - just keep doing what you're doing here and I'll be a subscriber for life!
You've got a deal, Andrew! Thanks for the long-term sub. Chances are my video production won't ever be ready for prime time but I do have a passion for producing meaningful content for appreciative viewers. Best, Matt
Same with me
Ditto!
@@NextLevelCarpentry Thar makes 3 of us!
Goodness! I can’t believe you apologized for the quality of this video. Many could learn from your camera work and the cadence of your instruction. Thank you for creating content that makes our time in the shop more fun and safe.
Thanks for a kind comment Chris... you're certainly welcome. The TH-cam audience at large can be harsh critics so it's always nice to hear from those who benefit from content regardless of video production finesse. Best, Matt
Excellent, informative video. Just bought a 735 and have been viewing boatloads of videos on it. Your video Matt is one of the most helpful I have seen. Thanks again. Cheers, Mike.
Thanks Finn... I recently did a 'deep dive' maintenance video for the same planer. You shouldn't need it for awhile (hopefully?) but might find it interesting. th-cam.com/video/vFxEdMJ0IGw/w-d-xo.html Best, Matt
This is the type of person you want to buy your used tools from! Excellent video sir.
Your videos are way better than the fancy edited ones. Knowledge and experience make you an expert. Subscribing!
Thanks for sayin' AND subscribing Kate. If you can handle my editing shortcomings I think you'll find a good deal of 'knowledge and experience' packed into videos here at Next Level Carpentry. Best, Matt
Agree. Great content is way more important than fancy edits/
My DW735 has been converted to a helical cutter head and I get a super smooth finish out of it. My experience with the DeWalt head and knives is that the blades always dulled rapidly. I plane a lit of hardwood and I was having to change the knives every time I turned around. Now, a nick in a cutter, one screw, turn the cutter, and I’m off to work again. Best bucks I’ve ever spent.
Thank You for the great information!!! I just bought that DW735 planer, have not even plugged it in yet!!! Will do a check over an a polish job before ever starting it!!!!
You'll be glad you did, SD... a little TLC on your new machine will make it perform noticeably better and last considerably longer!
Best, Matt
PS I hope you check out other videos like these on Next Level Carpentry that show how to get the most out of your 'new toy':
th-cam.com/video/NnqhdzwZTUc/w-d-xo.html
th-cam.com/video/86di2rV63wc/w-d-xo.html
This is like a day at the spa for that lucky Dewalt - you've inspired me to grow my lubricant and spray collection!
That's funny... maybe I should have slathered a facial creme on the machine and added those cucumber slices for a true 'click bait' video thumbnail 😁😎😂 The sprays and lubricants shown are a great addition to your 'collection' because they work so well on all your shop equipment... check out other maintenance tips videos on Next Level Carpentry for more examples if you're interested.
Thanks for watching and commenting ACW! Best, Matt
. . . a woodworkers cutting remark...
@@NextLevelCarpentry At this level, I'm almost surprised you didn't wipe down all the plastic with Son Of A Gun protectant! *haha
Best video yet. I love the no-nonsense way you film and not treat us like elementary school kids. I'm subscribing right now.
Who needs fancy video production!? The info is important and well presented.
Thanks Judy... I appreciate your endorsement and comment here! I'm pretty stoked about the next few videos in the pipeline that show making the 'custom box newels' I mention in this video... there's some stuff that's pretty challenging and plain old fun to do so I hope you like those too.
Best,
Matt
Well it is looking like PTFE will be a winner. I put the tiniest squirt of ptfe on the ends of the frozen roller and now it moves quite appropriately. So cleaning it out and lubing it looks like it will be a major win. It suggests that blowing the dust off the end of the rollers and giving them a squirt as routine maintenance will be a winner. Obviously, the gearbox has to come off to apply a squirt to one end of the front roller. Now I have the top chain to figure out.
Good news about the frozen roller, Greg, should be working good as new by the time you get through with it! You probably are already aware of this but it's very important to maintain the orientation or 'timing' of the four height adjustment sprockets... any change there would affect the parallelism of the cutterhead to the platen and make a mess out of planed boards. Not sure how they set it up in the first place but bet it's a trick to re-set accurately.
Matt
I'm in two minds about the top chain. I could just blow it and spray it all the way around. The question is - Do I trust where the posts are now. There is an idler gear to take up the slack in the height winder chain. In mine it was way loose and the small yellow plastic chain inspection covers are missing. So how did it get that way and has it already at least skipped one link on at least one post at some stage.
Adding to that, The two plastic post caps on the left side of the machine are broken. How. Broken by wood impact passing boards back perhaps or broken by somebody fiddling with the posts. I may try my luck with Dewalt support. The have already let me speak to a technician due to the lack of lubrication and maintenance advice in their manual and/or the lack of a service manual.
Greg, If you find out the calibration/setup process for re-setting the cutterhead I hope you'll post it or a link to it here... or somewhere... I'll bet you'll save folks a ton of grief if they've got a machine that's out of whack! Best, Matt
I changed my blades and cleaned my planer with you today. All while maintaining social distancing. Thanks. Couldn’t have done it without you.
Glad to hear it... there's nothing like running a few pieces of wood through a newly tuned planer... silky smooth and beautiful... enjoy! 😎
....."nostalgia taking over reality". I live that mantra on a daily basis. Even learned a thing or two along the way.
Hate it when that happens, right?! Best, Matt
As a DIY newbie wood worker I’ve learned so much from your videos. Thank you very much! For all you do for the channel.
Thanks for producing this video. Your explanations are clear and photography is excellent. This is a keeper for those of us who own a Dewalt 735 but don't use it as often as we would like. Thanks again.
You're most welcome Rick! Best, Matt
I just purchased a used DeWalt planer, and this has been the most informative video that I've seen, thanks
Thank you for convincing me to stick with a full blade as opposed to a helical Awesome advice followed with you normal sensible rational reasoning
It's a personal decision DL but if I helped you think it through to where it works for you like it does me then it's all good! Best, Matt
My DEWALT planer started struggling and leaving black marks on the white oak I was planing. I searched TH-cam for "dewalt 735" and found your video. It was perfect. About 20 minutes later I had flipped the blades, cleaned the rollers, and waxed the tables. The first board I planed was like I had a new planer. Thank you very much for your effort to share your knowledge.
Amazing what that bit of TLC does for a DW735, right? thanks for watching and commenting here! Best, Matt
I'm getting ready to change the blades o my planer. I'm glad I saw your video first it will make things easier since it's the first time I've changed them.
Just bought my first ever thickness planer… the DeWalt 735. Your presentation here is already in my books, for future references.
...Outstanding tutorial on planer maintenance. The beauty of it is it applies to most if not all thickness planers. Can't go wrong having an air blower at hand too. I'm of the thought that mineral spirits would do the trick for cleaning off gum & sap & just a little easier on the sniffer, ( nose )... Excellent tips on lubricating the chains too. Waxing & buffing the tables, great idea. I have been researching the DW734 planer which includes the tables & seems to get positive reviews as well, however I will look a little closer at this machine before making a decision. Thank you for putting this out there. Bill Farr... :-)
Bill, I suggest you not put too much importance on the "DW734 ... includes the tables" in making your decision. The REAL difference between the machines is the front to back length of the platten and cutterhead IMHO. That length in the 735 is probably close to twice the 734 and that length translates to stability which translates into minimized snipe. It's worth the extra bucks to by them for the 735 because the machine is more robust overall, again, IMHO. So that's just my 2 cents worth and not really the sales pitch it sounds like 😎 I think you'd not regret either machine's performance or quality of output.
Best, Matt
You have one of the best channels on wood working on TH-cam, thanks
Boeshield T-9 is the best lubricant for the chains. It is a waxy lubricant that is carried with a very thin solvent that dries after application. The result is a dry surface that does not attract dust, and the waxy lubricant is carried to the innermost part of the chain links.
I just bought this planer last week. I'm excited to start practicing. I'll make a note to come back here when I need to change the blades.
You can see a number of non-standard things your new planer can do here too: th-cam.com/video/86di2rV63wc/w-d-xo.html
Work safely and have fun! Best, Matt
I just purchased mine and found this to be very helpful. Thanks for taking the time to make these videos.
Keep doing what you do!
Will do, Michael... you're welcome and thanks for watching and commenting! Best, Matt
Absolutely terrific. You treat your tools better than most people treat their spouses! You are obviously passionate about what you do. Thank you.
I love mine. I do a couple steps out of your order. I clean the rollers and everyother part after removing the blades. I've used to many band-aids early on. Last step is installing those very sharp blades. But thanks for some cleaning tips I had not been doing!
Definitely a sensible re-arrangement of steps D.C., one that I and other viewers would be wise to adapt to avoid unnecessary lacerations during the cleaning process. Thanks for commenting and adding such a useful tip/suggestion! Best, Matt
Just noticed today my DW735 is not cutting as well as it once did and this video is such a great help - thanks for posting this. Don't sweat your production values - this is great!
Glad it helped Tim... new knife edges and a bit of TLC will have your machine working as good as new! Best, Matt
@@NextLevelCarpentry I did maintenance yesterday and just resurfaced a cutting board - amazing - working like a new machine. And like you mentioned, the surface is smoother than sanded! Very very cool, thanks again for your expert guidance :-)
@@timmcdevitt2732 Just happy to be of service😉😎 Thanks for watching and commenting on this video... Best, Matt
Thanks for this informative and well-executed tutorial! Just got a DW735x and the companion rolling stand and hope to maiden them over the next weekend. So coming across this video today was perfect timing. I appreciate your approach to content in this video which strikes a good balance between maintaining pace while still providing detailed, accurate commentary. This video explains and demonstrates the value of an organized thoughtful approach to planer maintenance. I plan to implement versions of your approach to tracking both blade and blade edge changes.
I also appreciate your commentary on the ability to offset blades to potentially minimize or eliminate ridges after blades get nicked. Have to think a little about that, the manual is pretty vague so I need to actually see the registration system to understand by how much the blades can be shifted.
Finally I was interested to see your thoughts on the helical cutterheads. I gather you don't subscribe to the notion that helical arrangement of the carbide cutters leads to smoother result as all cuts are made with a shearing action. In my case I plan to stick with the OEM arrangment unless it becomes problematic due to excessive blade changes or poor performance in figured boards.
Steve H thanks for such a thorough comment... I think you're going to love your new planer!
You're in the perfect position to add paste wax to the platen and in and out feed tables while it's brand new which is an excellent way to start off.
There are a lot of comments on this video but if you get a chance read through some of the early ones where other viewers have made an excellent sales pitch for an upgrade to a helical cutterhead. My uninformed opinion stated in the video is that the surface produced by sharp knives can't be reproduced with a helical cutterhead but I'm not convinced that my assumption is accurate. I wouldn't discourage anyone from checking into the helical setup but I would like to see the results first-hand myself before I committed to the time and expense of the upgrade. Thanks for watching and subscribing... Best, Matt
I have one of these planers and have NEVER seen this good of an explanation of how to maintain it. Thank you so much for taking the time to explain in such a detail!
Thanks for sayin' Glenn... hope it helps you get better performance and results from your DW 735! Best, Matt
Well I just bought one yesterday. And after watching this video.. got me more excited..plus you got a subscriber 👍👍
Sahweet! Welcome to Next Level carpentry! Best, Matt
I am buying this machine this week. I am glad that I ran across your maintenance video, This was very well executed and made easy to follow. Thank you for taking the time to show a novice.
Youbetcha Earl... thanks for watching. You're going to love your 'new toy'! Best, Matt
Holy crap. If I send you a list of everything I own, will you do maintenance videos for them all? Outstanding information presented succinctly. Thank you.
Hey Matt, rather than a list, just send me everything you own, and I'm sure we can work something out! 😲😁😎 Glad you like the video... There's a couple other maintenance type videos buried in the Videos list at Next Level Carpentry that you might find helpful for other tools... or not. I show how to maintain cast iron tabletops like on my tablesaw, jointer and bandsaw plus sharpening a shovel (of all things!) and recently even show how to sharpen a hammer?! From one Matt to another, you're welcome!
Awesome video. I am a novice and about to open this Dewalt planer for the first time. Your information will save me a great deal of trouble down the line. Thanks so much!
Nicely done video. I am purchasing this planer and loved the details you included. Appreciate your hard work!
I predict you'll love your new planer James! With a little of the TLC I shared you'll love it even more... Best, Matt
I didnt read all the comments, but rubbing alcohol works great at removing pitch easily without damaging plastic. I use it on all of my equipment and hands when there is alot of sap.
Great video on maintenance. Just bought one, cant wait to use.
Your presentation was great don't change a thing. No editing needed because your honesty and expertise shines through. I have been looking at planners for quiet a while and you just sealed the deal on the dewalt 735 any thoughts on an affordable joiner I can pair with it to get the job done. I would love to here your thoughts.
Why thank you 'Maureen'... I appreciate your comment. If you're disappointed with performance of a DW735 in any way I'll bet 'you're doing it wrong' 😁. If something doesn't look right or work right look closely at your methods and workflow for the cause. As far as jointers you'd do well to save up and search around for the most robust machine you can afford/justify. Keep an eye on eBay, Craigslist, auctions and estate sales and look for one with at least 6" width capacity. I used a couple 4" models away back... they're quite capable but you end up with a lot of inefficient work-around time because of limited width capacity. Most importantly try to find one with the 'parallelogram' type of depth-of-cut adjustment mechanism... it's far superior to the hand crank type for efficient, frustration free use. Powermatic and Delta are probably the most recognized brand names and because of robust construction can be resurrected nicely from even a pretty poor state. I'm biased against Jet and Grizzly knock-offs but that's probably just because I'm set in my ways... I'm sure there's many testimonies from those brands who are just as adamant about the performance of their machines as I am. Have fun finding and using a jointer and thickness planer in your shop. Shameless self promotion here: study more videos here at Next Level Carpentry paying attention to how I use them to get precise results on demanding projects. I think your woodworking capabilities will expand exponentially with efficient and effective use of these machines. Best, Matt
It was very much worth my while. A practical and business-first video with some delightful dry humor and a proper emphasis on safety and money saving tips in the side comments. I appreciate hearing the years of experience and lessons learned. This is truly “next level.” That planer should last for a hundred years with that kind of care.
Thanks Corey... I like your optimism for 'should last a hundred years'... I'm going to hope along with you for that sort of longevity! Best, Matt
Great video work! No apologies necessary! I like the straightforward approach. Thank you for the post.
Thanks gohuskies... The only real chance I have for making it on The Tube is with content because 'video work' is definitely not my strong suit! You're welcome too! Best, Matt
Very informative and disciplined video...No chatter chatter just straight information and advice...Thank you
You're welcome John... I try to keep the videos that way if for no other reason than I really don't know how to make 'em all fancy like HGTV does 😏 Best, Matt
Excellent video and process. Thank you for sharing and your video skills are excellent. Don't change.
Thanks for your comment and subscription E Caff! Best, Matt
My DW735 was well used when I bought it. Well maintained, too. After a few more years I've cleaned it up and changed blades a number of times. There are some good TH-cam videos that helped. But finally, here's the best video on how to maintain this great tool. Good ideas here that I have not seen before, like color coding the blade edges. Even better, the trick to slide one blade back a bit if there is a small nick so the blades even out the cut. Super!
Thanks for taking the time to put this good info out there.
You're welcome twalsh... glad you found tips to better maintain your DW although it sounds like you're already giving it more TLC than most. If you get a chance check out other Next Level Carpentry videos where you'll often see this planer in use. For a little entertainment watch the 'A REAL Board Stretcher... Wait, What?' video to see capabilities of this machine you've only imagined before 😂🤣😎 Best, Matt
That board stretcher is a real hoot. Well done.
Really great video! Thank you, I have a 735 and never changed the blades (I don't have time to work in my shop so the 735 doesn't get much use). I will know what to do when I need do maintenance. I subscribed to your channel. Thanks again!
diverhose thanks for subscribing and adding a couple Next Level Carpentry videos to your liked videos playlist... I really appreciate it! Best, Matt
I just bought this planer to replace my old Ryobi 10". Thank you for your thorough presentation. This is exactly why I subscribed to your channel. Lots of good information and suggestions. And it reaffirms that I'm not crazy, just because I too believe being thorough is important, it saves time and money in the end.
You'll find that upgrade to be a quantum leap in capability and performance! Amazing you held out so long; that Ryobi 10" is the first 'lunchbox planer" to hit the market back in the day and I was thrilled to have it available on a jobsite back in about 1988...
Yeap! The reason I held on to it for so long was that I use to carry it in my work van. Newer ones were way to heavy for me especially the older I get. Now I don't need one in the van, so I figured it was time to upgrade. I rebuilt it about 12 years ago and it still works pretty good actually. Now I don't need one one in the van.
Amazing story of an old machine that was a real game changer back in the day!
had one off these planers for years now , have run a lot of hardwood through it, great little planer , but the dewalt blades are garbage , there other manufactures that make much better blades for this planer, I do this same stuff on my planer on a regular bases . Nice video .
DJ, What 'other manufacturers' blades do you feel are much better? Do you have a favorite? I'd like to check into them and other viewers may too. I'm always disappointed when I put in a fresh set of DeWalt knives and get a 'streak' from an abraded knife edge after running a board with just a regular old knot in it through the planer. Some viewers rave about carbide knives but I haven't checked any of them out yet. Thanks for your comment... and reply if you are able. Best, Matt
Ive used these from www.Infinitytools.com , but living in Canada with the exchange rate and shipping make them seem a bit expensive , They are a bit thicker than the dewalts and I must warn you they are razor sharp. But they did outlast the dewalt knives by 5 to 10 times. I haven't tried the carbide ones because Im cosidering changing the cutter head to a helix one ,
Ive bought a few sets from Busy bee tools in Canada for around the $65 dollar range that were alright .
One thing I did notice in this video , when your handling blades especially the ones i bought from infinity and they are razor sharp , better be carfull probably wear gloves , they will slice you big time
Hope this helps
Sure helps, DJ, thanks for sharing this. I to like the 'outlast.. DeWalt by 5 to 10 times' aspect... I'll have to check into them. I appreciate your adding the caution about razor sharp knives... even the stock DeWalt ones will lacerate you with the slightest touch.
Best, Matt
who makes the best blades ?
'Best' is always subjective because cost isn't the only factor. I think the DeWalt blades are a great value but other viewers (like DJ above) have other preferences worth considering. Best, Matt
Dewalt should hire you! Best info I’ve seen on my planer by far. Learned a lot. Thanks.
i'll care for and feed it but i'm not taking it out for walks!!!
I'm with you on this Quadflopper! It's bad enough just cleaning up after the thing, much less taking it out for walks! Best, Matt
Just got this planer for Fathers Day, I haven't used it yet but learned several things watching your video, great job.
Somebody loves their Dad, John! Do your best to clean dirt, grit and dust out of the surface of boards before you send them through your new toy and it will work well and long for you... Best, Matt
TH-cam should demand a reason before you dislike a video. This was an excellent overview and tutorial with added helpful tips. I don’t think you could’ve explained it any better.
Opened up my 735 for the first time today knowing there was a nick in one of the blades. It was just a practice run. I'm going back in tomorrow now that I have all your information loaded into my brain to adjust the knives. I'm assuming I just slide the one nicked blade over some. Thanks for your excellent videos. I find them all invaluable and quite humorous at times. Barry
Sounds good Barry... FYI there's a limit to the size of nick that can be removed by sliding a knife but it's worth a try. When I install knives I always slide them to one side of the adjustment range or the other but if your knives were installed in the middle of the adjustment range you might need to slide one all the way left and another all the way to the right to remove/minimize the nick. If that doesn't make sense now it will after you open up and inspect installation position more closely with the knife keeper bars removed... Best, Matt
Thanks for the comments about the helical cutter head. That was very helpful and actually changed my plans.
Thanks for commenting... Do keep in mind that mine is just one man's opinion on what makes sense for me but there are those out there equally convinced that the helical cutterhead is the best solution... I've yet to be convinced of the value of it. Best, Matt
@drop stix with US pricing I'm pretty sure my calculations say that a helical head needs to last 8 times as long as two-sided disposable knives just to break even. And I've yet to be convinced that they produce a better finish. If it's only equal it lessens the appeal further. For my 8" jointer though it's a whole other matter because knives for that machine have to be re-ground and re-set with an antiquated jack screw method so the whole cost/value equation is flipped where that machine's concerned. I once had a Makita wet stone grinder for awhile but found it impractical... I was probably doing something wrong. With the relatively low cost for 3 new edges on 13" knives (39 linear inches) I'd have to sharpen all 3 edges in about 15 minutes or go backwards on the income/expense scale.
You probably get the sense I've been through all this before and you'd be right. Believe me, if there was a better option, at any cost, really, I'd jump on it, but I've yet to find such a thing... but I'm still hoping and dreaming for a self-sharpening diamond tipped cutterhead that produces and endless ribbon of flawlessly planed hardwood!😉😀😎 Best, Matt
Just bought this planer yesterday. Thanks for the video.
You're gonna love it Al... especially if you give it a bit of TLC occasionally! Best, Matt
Just got this machine, upgraded from a smaller Bauer planer. Excellent video sir, I'm sure I'll review this many times as I learn how to use this planer properly.
Wolfman: check out other videos here at Next Level Carpentry that show my DW735 in action. I think you'll gain insight into just how amazing your new planer is and can be! Best, Matt
Matt. Your 2 cents worth is a dollar to many new woodworkers. Even after 45+ years I'm still learning something new. Keep up the great work. Three thumbs up.
I was contemplating switching to a helical cutter head for my DW735 but what you said makes sense about the scallops. I get them with my jointer (it has a helical cutter) if I push wood thru too fast. I think you just saved me $500! Changing the knives on the planer is much easier than on a jointer anyway because of the time involved for alignment (on a jointer) so is not a big deal. Thanks for the info. You’re very direct with no messing around.
Great minds think alike; sounds like you've made the same observations and conclusions about helical cutterheads as I have.😎 Here's a little more in-depth look at the matter from another NLC video which might help reassure you, as it did me, that my decisions are sound: th-cam.com/video/A6muiJ42Y2I/w-d-xo.html
Best,
Matt
You are the only person who overheard say helical isn’t better for planer. I’m knocking you, what you say makes sense. My 735x is arriving in two days and I had planned up upgrading to the Shelix cutter head but now you have me reconsidering...
I think it's prudent to understand what the pros and cons of both options are so you're not surprised or disappointed when you put your amazing new machine to use. I've added detailed comments explaining my viewpoint on the matter in great detail if you dig into it... Best, Matt
Awesome video. It's all information you need, not flashy camera work and effects. Exactly what I was looking for. Thanks!
You're sure welcome Mike... no 'flashy camera work and effects' pretty much sums up video production here at Next Level Carpentry! 😎 Hope you find other content here equally helpful and 'awesome'? Best, Matt
Hi Matt, thanks for the video. I just bought a used Dewalt DW735 today and your video has taken all of the mystery out of what I have to look at once I open up my unit up. Your video will make doing a tune up very easy, thank you!
Have fun with your 'new' toy Bernie... it's a great machine and even greater when tuned up. I'm excited for you! Best, Matt
I knew the day would come to change my blades I was dreading it I’m mechanically challenged. Thank you for this video you really brought it home for me and it’s back to smooth planing .
Glad to hear it Robert... My goal for the video was lowering the bar of intimidation so it's great it helped you face that dread and get back up and running! Best, Matt
Pro Tip: When pushing the retaining clip down, rather than move the cutter head by hand, spin the fan blades its a direct connection to the blades rpm. And great video @Next Level Carpentry, very well explained and to the point! Thumbs up!
My goodness...you are good! No stone unturned!!! You are an expert at the camera shooting too! Excellent. MORE MAINTENANCE TRAINING FROM YOU!
I just upgraded to from a makita planet to the Dewalt DW735x. I’m excited to see the results. I love the video and you gave a lot of great and useful information. You’re a great teacher!! Thank You Sir!!
I've yet to be disappointed in any significant way with either of the DW's I've owned. I don't abuse the machine but don't baby it either... if I'm working hard I expect it to keep up and do it's part. Hope your's is all you expect it to be... plus a little more! Best, Matt
Really excellent video. I think I will have to watch it 3 or 4 times to fully absorb all the great teachings. Thank you!
Practice makes perfect, Bob, and going through the motions of maintaining your planer will make these steps second nature in time...
Best, Matt
Thanks for taking the time to film, edit and publish your videos. Content is more important to me than how well you can edit.
I appreciate that!
Just got mine and as stated before this is the best video I’ve found on this tool. Thank you sir!!!
I have this same planer and love it. Several years ago while planing a little off both sides of a factory 2x4 I found out it had a piece of metal in. Agggh, the one time I don’t check for metal! After rotating the blades to the other side when that side wore out I went to a set of carbide blades for it. And about 6 month later they came out with a Shellix head for it. If I ever have to replace the blades again or the planer I think I will put the Shellix head in it. I have one in my jointer (the same one you have) and love it as well.
Great video as alway. Thanks for all the great content!
Ron
Ron, thanks for commenting on this video. I assume you prefer the carbide straight knives over the standard HSS ones? I've thought about getting them but always figured I'd just nick the carbide somehow and be no further ahead. Some other commenters on this video mention that the Shelix for the DW735 requires more power for planing than straight knives. All who've gone to the Shelix say they love it even with the 'loss of power' thing so I'm interested in your thoughts about the 3 options. You're welcome for the 'great content'! Best, Matt
This is a very well-done video… I must say that I do have the helical cutterhead in my DeWalt 735 and I have found it to be absolutely wonderful. I see no evidence of any scallops or imperfection in the surface being planed. While the helical head represent a significant investment I feel that they are Worth every penny. Two years later I’m still on my first set of carbide knives.
Paul, thanks for commenting on this video... glad you liked it. I also appreciate your endorsement of the helical cutterhead. I made my assumption by extrapolating the surface of wood I get from the hardwood supplier as well as my jointer and assumed that, since the DW735 has a smaller diameter cutterhead that it would be 'worse' rather than better than the others. Considering your comment I'll have to rethink my conclusion because there's no way I'd give up the helical cutterhead on my jointer and having all the benefits of carbide cutters in the DeWalt plus flawless finish quality from straight knives would be enough to change my mind.
Thanks for presenting your experience so tactfully! It's a value to me and other viewers that I appreciate!
Best,
Matt
Looking to buy this for my Christmas present to myself this year. LIked the video so I can refer to all the great tips you gave. Thanks for taking the time to show what the proper maintenance involves.
Should make a great Christmas present for you Mark! Unless you have prior obligations I would sure appreciate if you use the link in the description of this video to purchase your new planer... it's the same low online cost to you but Amazon pays a small fee that helps the channel produce more videos for viewers like you free for the watching. Have fun with your new toy and by the way you can see mine in use in the next video upload to Next Level carpentry where I use it to repurpose pallet wood... Best, Matt
Matt Thank you for this video (I am now a subscriber) I' bought my dewalt 735 new a year ago and now am experiencing snipe and bogging down with 8-9 inch boards. Actually had to help push some of them them through. (Waxing the table did help) I will follow your EXCELLENT video step by step as I flip the blades and clean it. I suspect when I'm done with your maintenance video I will once again be in love with my Dewalt 735
Sounds like you need the 'full treatment' fbtool... be careful around those sharp blades! Make sure you clean the rollers good too but sharp knives and a clean, waxed table are most important. I often re-wax the platen (table) during a job that requires a lot of planing not waiting just for new knives and a major cleaning. Thanks for the sub! Best, Matt
Perfect useful content, as always. Just got one of these from my stepdad who can't do much anymore and I look forward to keeping it maintained with these excellent techniques! I see you have a new "Deep-Dive" cleaning video for this planer just two months ago, a must watch for me. Thanks Matt!
I think it will help you out Justin because it's a fantastic machine especially if it gets a little preventive maintenance from time to time... hope you're able to adopt some of the unusual techniques you see in other NLC videos like the angled painting fixtures... truly a useful and versatile machine. 😎
Great video. I just purchased a new DW735 and the instructions that came it were wanting. Never having own a planner before, your video is a huge help. Thank you!!!
Thanks for watching and commenting... check out other videos here on the Channel to learn many other 'next level' ways to use your new planer and get more out of it than you thought possible! 😎 Best, Matt
Hi Matt, I have managed to create a chip in my blades and now know how to remove the little raised bit, by offsetting the blades. Thank you so much for that most valuable tip! Wonderful information in all your videos. One or more ahh haa moments in every one...
For sure... kind of like a get out of jail free card in Monopoly right?😁😎
Fantastic info! much appreciate your time, energy, and passion for your craft. I do believe you have changed my mind on a helical cutter head... not 100% sure of that but definitely food for thought. I have watched several of your other videos and after watching this one you have unquestionably earned a a new subscriber. Yes, there are folks that have more polished videos but you sir are doing great work and have great information to share. THANK YOU!!!
Great video, exactly what I needed. I have been using the DW735 for a few years now in my wood shop and now we have a few nicks. I plan to follow your instructions exactly so I appreciate your thoroughness. Thank you for sharing your vast knowledge and experience with us!
I just bought this one, combined with a slightly cheaper planer, looking forward to rewatching this one when I need to change the blades and service this one. Thanks!
Great demonstration of blade change and routine maintenance. Thank you for making it. Seeing you clean and wax the area below the blades made me nervous though. I'll be doing that part while the blades are removed.
Just got this planer. Got a nick in the blades on the second piece of wood. Thank you for the detailed walkthrough on how to change and shift the blades! I really appreciate it!
Youbetcha Jason... in other NLC videos I show pre-cleaning wood with a stiff wire tug brush and a wide putty knife to remove the majority of nick-causing bits of sand, metal and abrasive dust and minimize the need for shifting and changing blades... hope you get a chance to watch some others... Best, Matt
@@NextLevelCarpentry awesome Matt! I'll take a look. Thanks for the reply!
I'm planning on buying this thickness planer and you have just given me a wealth of information on its care and maintenance, thank you. I've been subscribed for awhile now, and I always enjoy your content. I'm learning a lot from you thank you again.
Thanks for watching commenting and subscribing Shelby!
This is a PROPER maintenance video! Very well done! I appreciate a boi who takes care of his toys. Thank you!
That was Next Level! While I am not a Dewalt fan the 735 is an excellent planer. I've had one for years and also have to attachment for the hose /bag. I use a woven leaf bag acquired from the feed and seed store. I have touched up dull blades with a fine diamond stone and while not like new I use those resharpened blades for rough stock removal.
Thanks for adding your comment and sharpening tip here! Best, Matt
Just unboxed my dw735 today. This video was terrific and I saved it for future reference.
I have a 735 and I have changed the blades. Your video showed me things that I did not do, but I will next time. Thanks for the info it was very helpful. Looking forward to your next video. Thanks again.
You're welcome for the video, Carl, I think you'll find the little things helpful on your next blade change. BTW I often clean and wax the platen in between blade changes since having it all slicked up significantly reduces the amount of snipe the planer produces. Hope you'll surf around Videos already uploaded on Next Level Carpentry because 'next videos' are a little sparse these days with a busy summer life and work schedule. Best, Matt
Thanks for the thorough presentation. You are meticulous with your work, and I really appreciate the absence of accompanying music!
Thanks very much for such an informative video....my planner works a lot better now after your maintenance tips. I was blowing sawdust all over the place till I saw your set up. I hunted around and found a collection bag off a Stihl blower vac and hooked it up as did. No more dust everywhere.
Good on you Evan... glad to know I could help. The DW735 is a great machine and even better with a little TLC... and a dust collection bag! Thanks for subscribing...
Best, Matt
wow!!! Dewalt should hire you for this product review and maintenance process. Thank you for your sharing.
Just bought your model planer, and this is a great teaching video for me and the future. Thanks
Just bought my planer have not ran a board thru it yet...I think this video was great so I can get see all the maintenance it takes and watch out for some of this stuff. Great Job
You're gonna love that new planer Raymond... congratulations. If I was you I'd apply a coat of wax to the platen before the first use even... really makes a difference in the performance. Have fun! Best, Matt
What you are communicating is perfect, both in content and usefulness ...and no time wasted either. You don't miss anything or skip over details that I'm really wanting to know. I just purchased this planer and I will initiate the color marking of blades right from the start. In fact, I used your method to make myself a handy-dandy Check List. Thank you for your efforts. Don't 2nd guess yourself on these videos. Your intuition has positioned you perfectly in doing a wonderfully useful video.
I just ordered a used DW 735 so I found your demo very useful. Thanks
This is an incredible video. I recently purchased this planer and I believe in preventive maintenace is the key to proper functionality of any piece of equipment. i have read the manual many times ( it is my nature to do so) and this is really all you need to keep it running properly. Thank you
Changing the knives in my DW 735 this weekend, I dropped a knife down into the machine below the cutter head. Talk about a booger getting it out! Finally was able to do it with a magnet retriever I have that was just narrow enough to get down in there. I'm surprised there is now way to dial out snipe with this otherwise excellent machine. I appreciate the crazy glue workaround you offer in another video.
Sounds like a pain Bill... did it not work to just raise the cutterhead and retrieve wandering knife from the platen below? Whatever it takes to not get cut by one of those knives though. I should do a video on snipe exclusively: the physics of a self feeding machine, no matter the quality, and planing wood pretty much guarantee snipe... best we can do is minimize it and deal with what's inevitable. I think of snipe as a bit of a 'woodworking tax': I don't like it but have to live with it. Best, Matt
Thanks for posting this video. I took a chance on a used one at a local pawn shop at a good price cleaned it up checked the plades (following your video) and fell in love with it
WOW!. I've just been going through my shop running old wood that I kept because it was scrap that I found but good wood like teak, cypress, mahogany and oak that people had thrown away and what comes out the other end of the planer is just amazing! It came. Following your tips I know I am on the right track of years of use with this great tool.
I second all the comments. My first planer and it gets me pointed in the right direction. Thx.
I have the same machine. I've changed the 2 sided blades 3-4 times (I don't use it very frequently). I learned some good stuff here I can put to use. Thanks Pardner.
Olcus... the dw735 is a remarkable machine for the money isn't it?! Glad you found the tips useful as I really believe those little extra things during a blade change get better performance out of the machine and less frustration during use. Thanks for commenting on a Next Level carpentry videos... I appreciate that! Best, Matt
I'm showing age here, but I remember in high school using straight isopropyl alcohol to clean the rubber platens on typewriters. For cleaning pitch off on metal, I've been pleased with either the Trend pitch remover (at Woodcraft) or Rockler's pitch remover. They both seem to use the same drum to pour out of. I regularly clean my table saw blades with the stuff and it cuts through the pitch real well. Rockler has a big tupperware type container that works well to just leave the stuff in it and I can soak a blade. That might work well on the polyethylene plastic pieces as well. You've motivated me to tear my DW735 a part and give it some TLC. I'll have to try the pitch remover on the plastic pieces. For the rubber platens, I think I'd stick with the old high school solution.
Thanks for your videos. I enjoy watching them. You provide a lot of good practical advise. I appreciate it.
Any time you invest in cleaning your DW735 will pay you back in better performance Allan... regardless of the 'solvent' you choose... any one that gets the job done is good! Plus you highschool Industrial Arts teacher (assuming he's passed on) will be smiling down at you. Thanks for commenting here! Best, Matt
Fantastic, thorough video with great proactive tips to keep the planer running smoother and with less reactive maintenance down the road. Thank you!