I'm just curious but how has the ease of use been when going in and out of the car? I worry I will struggle with the latches with putting it back in the car since I drive a SUV. Do you still love and prefer the URBN compared to a carseat with a base?
I bought this from Germany, fits on my uppababy Vista V2 with the ring adapter and the nuna Mixx next 2 with ring adapter. I did not buy it with a travel system, it’s was bought separately. Please note: this car seat fits the nuna trvl double as well. But trvl double is not released yet.
The issue with this is that the car seat is being pulled out of the car at an angle before the anchors have been fully disengaged from the isofix, which is pulling the anchor leg into a wider position. We managed to get ours clicking back into place by squeezing the anchor legs together (towards each other) back into their original position, so that it's then in a better position to grip the car seat when pushed back into position 👍
The nuna urbn actually crash tested better than their other car seats but they are all crash test approved so it all comes down to personal preference and what is important to you
@@TheBabyCubby does hospitals have any concerns for seats without base? Just want to male sure they deliver me baby with this car seat… its new for everyone!
@@PreethamRameshNaikI’m sure this is too late but many many of the car seats on the market are made to be just as safe without a base. The hospital shouldn’t care as long as you install the seat correctly!
@@devinlwoodsI bought mine by itself, so I have tested both ring and 2 separate piece adapters to fit nicely, I just prefer the ring adapter. I have tested it on Nuna Mixx, Uppababy Vista V2, Cruz V2, Demi Grow, Metro, & others.
It will fit nicely in most cars, but not every car! Some cars have latch connecters that are deeper in the seat that make it hard to get the latches in smoothly every time.
The Nuna Urbn is unfortunately not compatible with the Ergobaby metro strollers! The Nuna Urbn is only sold in travel systems with the Nuna TRIV, TRVL, and MIXX strollers! ❤️
Grip the back where she is grabbing as if you were gripping the rear hatch button on the tailgate of most modern vehicles. Feel around for it and you'll find it.
Just installed this car seat for my new born and we absolutely love it so far. Thanks for the detailed video!
Our pleasure!
I'm just curious but how has the ease of use been when going in and out of the car? I worry I will struggle with the latches with putting it back in the car since I drive a SUV. Do you still love and prefer the URBN compared to a carseat with a base?
Loving the baseless car seat ! Also paired with the Nuna triv next! Looks sooooo sleek and stylish. Definitely getting !
So glad you love it!
Trying to find a video on actually putting the baby in and getting the adjustments right.
Same here and still looking for one
th-cam.com/users/shortsqg9g3nYIaKw?si=wzLD28OajithVkmz
th-cam.com/users/shortsZLZmbmQqo9s?si=q6QIBBKmh4tBD0QH
th-cam.com/video/MuHvIO42-QU/w-d-xo.htmlsi=xf4Lcp6dLC1p5EnQ
Your video was super informative and truly helped with our installation, ngl we panicked when we didn’t see the carbase
I’m so happy you found our video knowledgeable!
I bought this from Germany, fits on my uppababy Vista V2 with the ring adapter and the nuna Mixx next 2 with ring adapter.
I did not buy it with a travel system, it’s was bought separately.
Please note: this car seat fits the nuna trvl double as well. But trvl double is not released yet.
Amazing!! I just bought one ❤
Thank you so much this was an awesome video & a life saver.
Glad it helped!
can I use the seatbelt and latch ?? or does it have to be 1
Are there ways to allow this to grow with your baby?
You can rethread harness to adjust the height as your baby grows but it is designed to hold a baby up to 22 lbs!
My rigid latches on my pipa urbn are loose and stick out when not in use/ they don’t click back into storage position on the car seat! Help please !
Hello! That seems like it may be a manufacture issue. Reach out to Nuna and if it cannot be fixed, they may send you a replacement!
SAMEEEE
The issue with this is that the car seat is being pulled out of the car at an angle before the anchors have been fully disengaged from the isofix, which is pulling the anchor leg into a wider position.
We managed to get ours clicking back into place by squeezing the anchor legs together (towards each other) back into their original position, so that it's then in a better position to grip the car seat when pushed back into position 👍
Does this attach to the babyzen yoyo with the L adapters?
Why doesn’t property latched to the stroller
Is this really safe without baseless? Or should I go for pipa rx ?
The nuna urbn actually crash tested better than their other car seats but they are all crash test approved so it all comes down to personal preference and what is important to you
@@TheBabyCubby does hospitals have any concerns for seats without base? Just want to male sure they deliver me baby with this car seat… its new for everyone!
@@PreethamRameshNaikI’m sure this is too late but many many of the car seats on the market are made to be just as safe without a base. The hospital shouldn’t care as long as you install the seat correctly!
Where should the shoulder traps be positioned?
At or below the shoulders and the chest clip should at baby’s armpits!
Does anyone know where to get compatible anchor guides for the Nuna Pipa Urban Travel? We lost one of the guides.
It should come with seatbelt guides! You can also reach out to Nuna for some! ❤️
Is it compatible with other stroller brands with adapters?
It will be compatible only with the ring adapters which would be the UPPAbaby vista that I’m aware of!
@@TheBabyCubby Got it! Thanks for your reply!
@@mmg-cdf8560 just be mindful that you can't purchase this car seat by itself, you have to get it with one of three Nuna strollers.
@@devinlwoodsI bought mine by itself, so I have tested both ring and 2 separate piece adapters to fit nicely, I just prefer the ring adapter. I have tested it on Nuna Mixx, Uppababy Vista V2, Cruz V2, Demi Grow, Metro, & others.
Will it be compatible with nuna demi next stoller?
Yes! There is a travel system that has the Demi Next and Pipa Urbn included.
Is this car seat suitsble for every car type?
It will fit nicely in most cars, but not every car! Some cars have latch connecters that are deeper in the seat that make it hard to get the latches in smoothly every time.
I’ve tried getting this out of the car several times I’ve pulled the lever it’s not working
Hmm that’s very interesting. You might want to contact Nuna’s customer service directly for more assistance!
Did you get it out? Just curious because it might change my mind on buying it or not.
@@andmar5 did you find out what the problem was getting it out of the car
can you still use this with a nuna base even though it doesn't need one?
Unfortunately, you can not use a base with the Nuna Pipa Urbn.
Is the base required?
The URBN is baseless so it is not required to have one.
Can you tell us which strollers it’s compatible with? The ergo baby metro to be specific?
The Nuna Urbn is unfortunately not compatible with the Ergobaby metro strollers! The Nuna Urbn is only sold in travel systems with the Nuna TRIV, TRVL, and MIXX strollers! ❤️
It will fit, I had that stroller for travel since I bought the urban separately. It’s just not listed as tested by the website.
Does it work with Cybex Priam 4?
Unfortunately, Cybex does not recommend using the Nuna Pipa car seats on the Cybex Priam 4.
How much just for the car seat ?
The Nuna Pipa Urbn is only sold in travel systems. ❤️
When I bought it separately it was $550.00
Why not the demi-grow?
It is still a new seat so they are testing it out specifically for the easier travel style strollers!
I have the Demi grow, it fits on the ring adapter and the 2 separate pieces adapter.
Great… but how do you remove it from the f-ing car!!!!!
Use the lever located on the back of the seat! ❤️
I’ve use the lever it’s not coming out please show a video of what lever you are talking about
@@ahmedhafez8078 yea its not as easy as they show
Grip the back where she is grabbing as if you were gripping the rear hatch button on the tailgate of most modern vehicles. Feel around for it and you'll find it.
the trvl doesn’t fit in overhead bins
It depends on the size of the plane, and airline guidelines. ❤️
@@TheBabyCubby are there ones where it fits with the wheels off then i guess? or maybe take off the belly bar?
@@signediaz2469 Yes, sometimes that is required.
Back ground music too loud
Thank you for your feedback! We will relay it back to our team! ❤️
Such trash I spent $800 on my sisters in law travel system for it not to come with a base someone please tell me it also works with a base🤦🏻♀️
The urbn does not work with a base
It’s made to be baseless! It’s been safety tested. As long as it’s installed correctly with the locks or seatbelt baby will be safe.
lol so angry ... it doesn't come with a base .... a quick google search would give you all the info
It dose not need one
Can I use the seatbelt and latch ? Or does it only have to be 1