Hey thanks man it was nice to know everything I needed for the job. First time doing the job and took under an hour. I taped the joints to all of the ducts the duct tape. I did the same back in the bunk it helps it blow harder
You'll have to replace the blower, it was easy. Don't do the diode thing. When you compare motors you'll see the old one dont turn and has a drag to the touch as compared to the new one. Had Volve dealer across the street from me, walking over and getting the part and installing it myself was under an hour. Just dont lose them little clips that hold the cover together
The blower fan is supposed to hesitate before starting. This truck has electronic climate control. Notice that it has actual temperature settings, not just red for hot and blue for cold. The computer figures out what the ambient temp is so it knows what speed the fan should be turning. This will occur when the fan is set to ‘Auto’ or set manually to the speed you prefer. The a/c on and off switch was probably sticking because of the poor decision to locate it near the cup holder and it has liquid splashed into it. Spray some contact cleaner around the button and work it a few times. The control unit behind the controls is very expensive and it can wreak havoc with other components if you change out blower motor or resistor with the key turned on. A new one has to be programmed in with a laptop. I found this out the hard way. $$$!
Same issue going on with me but when I hit the lower panel it does not turn on. Fuse is fine as well. How would you diagnose the blower motor resistor?
its just a Samsung tablet with blue link eld programing and the mount is I believe lockbox. They can be mounted anywhere but for this company I just mount them like that so there uniform
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.6 (1/4)](http://i.ytimg.com/vi/m05kZ2GDKXg/mqdefault.jpg)
Hey thanks man it was nice to know everything I needed for the job. First time doing the job and took under an hour.
I taped the joints to all of the ducts the duct tape. I did the same back in the bunk it helps it blow harder
I hit blover motor location
now it works properly
Thank you🙏👍🙂
Serkan Bilsel awesome and glad to hear it helped you
You'll have to replace the blower, it was easy. Don't do the diode thing. When you compare motors you'll see the old one dont turn and has a drag to the touch as compared to the new one. Had Volve dealer across the street from me, walking over and getting the part and installing it myself was under an hour. Just dont lose them little clips that hold the cover together
In the middle of replacing my fan on my 2003 volvo this was the same and this video did the trick big thanks , you should keep posting videos
th-cam.com/video/nDG-AnC3rnM/w-d-xo.html
The blower fan is supposed to hesitate before starting. This truck has electronic climate control. Notice that it has actual temperature settings, not just red for hot and blue for cold. The computer figures out what the ambient temp is so it knows what speed the fan should be turning. This will occur when the fan is set to ‘Auto’ or set manually to the speed you prefer. The a/c on and off switch was probably sticking because of the poor decision to locate it near the cup holder and it has liquid splashed into it. Spray some contact cleaner around the button and work it a few times. The control unit behind the controls is very expensive and it can wreak havoc with other components if you change out blower motor or resistor with the key turned on. A new one has to be programmed in with a laptop. I found this out the hard way. $$$!
I respect the fact that the truck is clean
Thanks, just replace my a/c blower following your video......
Thank you so much man. I watching this video and doing my truck. Thank you again.
Glad I could help
Just a little tip. You should have started removing that top moulding over by the gauges first. It's way easier
Thanks brother. Hitting the blower motor restated it. Thanks
Thanks, just changed my blower. Diagnose helps cause that switch modual is 350$
396$ in Fort Wayne Indiana
Thank you 🙏🏻 you’re damen i save a lot money because of you 👍👍👍👍
Thanks for sharing! Very helpful! Did this deed today!
I just gave it a solid punch at the blower area like u show it and starts working thanks
Thanks a lot!... Right to the point!
Muy buen video ...gracias por subirlo
Un 10....
Same issue going on with me but when I hit the lower panel it does not turn on. Fuse is fine as well. How would you diagnose the blower motor resistor?
Very helpful video thanks
Thank you sir 👍🏼👍🏼👍🏼 you are the best
Excellent,Thank You!
Thank you helped me out
This just happened today on me, if you knock on the panel on the passenger side you might get it working temporally
Mines is blowing heat.where are the blend doors module?
Hey. What brand is eld in this truck??? That mount looks clean as well.
its just a Samsung tablet with blue link eld programing and the mount is I believe lockbox. They can be mounted anywhere but for this company I just mount them like that so there uniform
8526 Productions thanks. Yes the mount brand is GPS Lockbox. Looks more lighter than my ram mount I’ll give it a try soon.
You're a fucking life saver
This has like thousand screws and clips
Ha yes it does but as long as you keep them together no problem putting them back