Awesome, I'd like to buy this for my car. I just got MAD catless downpipes + 3.5" single midpipe installed. The car's an animal, but I'd actually prefer a valve controller to keep those valves SHUT at almost all times. When they're closed in eco mode, it's the perfect sound to me, after my exhaust mods.
Thanks for the vid! I might try just unplugging the connectors with the valves in the fully open position first to see if I don’t mind living with no ability to put it into quiet mode for a while. Worked for my F-Pace SVR without any highway drone but I’m thinking the I-6 might drone a bit if it’s always stuck with valves open haha…we’ll see.
You can certainly put the car in sport mode, rev it until the valves open, and then unplug them. They will stay open, however, the stock settings do not allow the valve to be FULLY open. You'll see that its only about 3/4 open. With this valve controller, it forces the valves completely open. And obviously also offers the ability to close them with the push of a button.
Great video! When you use the remote to close the valves, does this essentially put the car into normal/stock mode where the valves will open and close independently depending on the driving mode you are in? Also, when you have the valves fully open via the remote, do you still get the pops and bangs on lift off in M1/2 mode? Keep up the good work!
You are correct - that is exactly how it operates. You also still get the natural burbles in M1/M2 modes. My car is tuned now so I was able to increase the burbles to my liking.
Thanks for the video! I personally cannot hear TOO big of a difference. The idle is where it seems to change the most. The flow of fluid between a 3/4 open valve and a fully opened one would be minimal. It won't be anywhere near loosing 25% of flow. I DO like that they stay open and don't shut at idle, though. Just not sure if that's enough for me to no longer have it integrated into my M1 and M2 buttons (pairing to garage door opener would help a bit).
It is certainly noticeable outside of the car. Its even more noticeable with an aftermarket exhaust and catless downpipes. The difference between valves open and closed is much more significant in terms of volume.
Like your other videos, great content!! I installed my valve controller but noticed that I was having a signal issue. I ended up mounting it in the battery well. Do you see any issues with that?
Appreciate it! Ive heard of others having signal issues too - having to click the buttons more than once. I dont see an issue with leaving it in the battery well. If it works better for you, then by all means!
@@Tweed22 There are holes in the frame on both sides. Both are plugged with a rubber plug. If you go this route, I recommend protecting the cables as the opening/ frame edge might damage the cable from movement.
Does this completely bypass the factory valve controls or can you put it back into OEM mode when you feel like it? Looks like the remote only had 2 buttons which I assume is fully open or closed
Hey! I am thinking about getting this for my G80. I have a 2022 M3 Comp Xdrive. How many valves does it have? I'm confused on if I should get the two valve or the one valve controller. Sorry if this is a dumb question haha
I dont unfortunately. Loudness is hard to capture on video. I will say, when paired with an exhaust and/or downpipes, the switch from valves closed to valves open is much more drastic. Especially from outside the vehicle. Much more noticeable.
Another Good DIY video. I just ordered a Midpipe for my G82 and I'm thinking of adding the valve controller. Sorry for my super anal question, but do you think there's a chance for any rattles after installation. It would drive me crazy.
Thanks! You'll love the valve controller. It really opens the exhaust up. And I was afraid of rattles too but if you secure everything down, you should not have a problem. And since I velcro'd the box, it stays in place. I have had ZERO rattling or noise.
A lot of cars have quad tips but its only 2 pipes coming back. And the exhaust still flows out of all 4 tips when the valves are open. The valves are only on 2 of the tips (one on each side).
@@accelerated_motion agreed... Would you say this scratches the itch of getting a whole new exhaust? I just picked up my g87 a few weeks ago and it just isn't loud enough. Feel like my x4m40i was louder.. This is currently a lease so I'm just not totally comfortable with hacking up the exhaust yet
@@brelaxed13 For me, it does scratch the itch of getting a new exhaust. I was actually surprised at how much louder the car got with the valves completely opened. It actually sounds pretty decent now. Especially if your vehicle is a lease, you can easily revert back to stock in a matter of minutes. And a lot of these valve controllers require wiring into the trunk for a power source. This is also why Dahler's version is so much better/easier. It just plugs into the factory harness under the car and everything is mounted out of sight underneath.
@@brelaxed13 sounds good! You won’t be disappointed! Please consider using my affiliate link in the video description. It gets me some commission which helps the channel grow. Thanks!
Were the revs at the beginning of the video without the controller installed? Just changing the drive mode? And what mode were you using at the end when using the controller?
@@accelerated_motion at the end, do you recall what mode the car was in though? Wondering if those burbles were with comfort or if the car was also in sport+.
Awesome, I'd like to buy this for my car. I just got MAD catless downpipes + 3.5" single midpipe installed. The car's an animal, but I'd actually prefer a valve controller to keep those valves SHUT at almost all times. When they're closed in eco mode, it's the perfect sound to me, after my exhaust mods.
Nice!
I have MAD catless downpipes pending install. So I’m curious to see how loud it gets. But having the ability to close the valves is great
Thanks for the vid! I might try just unplugging the connectors with the valves in the fully open position first to see if I don’t mind living with no ability to put it into quiet mode for a while. Worked for my F-Pace SVR without any highway drone but I’m thinking the I-6 might drone a bit if it’s always stuck with valves open haha…we’ll see.
You can certainly put the car in sport mode, rev it until the valves open, and then unplug them. They will stay open, however, the stock settings do not allow the valve to be FULLY open. You'll see that its only about 3/4 open. With this valve controller, it forces the valves completely open. And obviously also offers the ability to close them with the push of a button.
Portimao is such a gorgeous shade. Thanks for the vid.
It really is! Thanks!
Great video men! Keep it up 👍🏻💪🏻
Thank you!
Great video! When you use the remote to close the valves, does this essentially put the car into normal/stock mode where the valves will open and close independently depending on the driving mode you are in? Also, when you have the valves fully open via the remote, do you still get the pops and bangs on lift off in M1/2 mode? Keep up the good work!
You are correct - that is exactly how it operates. You also still get the natural burbles in M1/M2 modes. My car is tuned now so I was able to increase the burbles to my liking.
Thanks for the video! I personally cannot hear TOO big of a difference. The idle is where it seems to change the most. The flow of fluid between a 3/4 open valve and a fully opened one would be minimal. It won't be anywhere near loosing 25% of flow. I DO like that they stay open and don't shut at idle, though. Just not sure if that's enough for me to no longer have it integrated into my M1 and M2 buttons (pairing to garage door opener would help a bit).
It is certainly noticeable outside of the car. Its even more noticeable with an aftermarket exhaust and catless downpipes. The difference between valves open and closed is much more significant in terms of volume.
Like your other videos, great content!!
I installed my valve controller but noticed that I was having a signal issue. I ended up mounting it in the battery well. Do you see any issues with that?
Appreciate it! Ive heard of others having signal issues too - having to click the buttons more than once. I dont see an issue with leaving it in the battery well. If it works better for you, then by all means!
Are there holes in there to route the cables?
@@Tweed22 There are holes in the frame on both sides. Both are plugged with a rubber plug. If you go this route, I recommend protecting the cables as the opening/ frame edge might damage the cable from movement.
@@Tweed22 following the video instructions.
Getting this installed in two days! Are you running any exhaust mods at the time of this video?
Awesome! No exhaust mods during this video.
Do they still open even when the car is off , or do they reset when you turn off the car
I believe the valves close when the car turns off.
Why no driving to check the sound??
You can hear the difference in the revs. I just did not do drive-bys for this video.
I will be using bm3 after femto unlock; I know bm3 has an option to open the valves, does bm3 will keep these valves open?
Yes, it can be done in BM3, but I dont think its FULLY open still. Need a valve controller to force them 100% open. I run both.
Does this completely bypass the factory valve controls or can you put it back into OEM mode when you feel like it? Looks like the remote only had 2 buttons which I assume is fully open or closed
The valve controller allows you to fully open the valves, as well as fully shut them. With OEM settings, the valves only open 3/4 of the way.
@@accelerated_motion so if you set it to closed, it reverts automatically to Oem settings?
Will it cold start with valves open with remote engine start?
It will operate like OEM but I think that you can program it to remember settings. Never tried to play around with that though.
@@accelerated_motion I just got this for my X4 M and I love my cold starts. I appreciate the video
Hey! I am thinking about getting this for my G80. I have a 2022 M3 Comp Xdrive. How many valves does it have? I'm confused on if I should get the two valve or the one valve controller. Sorry if this is a dumb question haha
I recommend climbing under the car and looking at your stock exhaust. You'll be able to see if there is a valve on each side or not.
Changed your tail lights back ?
Naw. I filmed this video before I changed my tails. I just didn’t make it live til later ha
Is gour exhaust all stock?
In this video, yes. All stock.
Do have a decibel meter? I can’t seem to hear “louder”
I dont unfortunately. Loudness is hard to capture on video. I will say, when paired with an exhaust and/or downpipes, the switch from valves closed to valves open is much more drastic. Especially from outside the vehicle. Much more noticeable.
I just kind of dropped mine in the black bucket thing because I couldn’t get it to stick for the love of me lmao
That works too - as long as its not bouncing around and making noise, you should be fine.
Another Good DIY video. I just ordered a Midpipe for my G82 and I'm thinking of adding the valve controller. Sorry for my super anal question, but do you think there's a chance for any rattles after installation. It would drive me crazy.
Thanks! You'll love the valve controller. It really opens the exhaust up. And I was afraid of rattles too but if you secure everything down, you should not have a problem. And since I velcro'd the box, it stays in place. I have had ZERO rattling or noise.
@@accelerated_motion Thanks!
You still using this, have you come across any issues?
Yes, still using. No issues whatsoever
It’s funny how you have quad exhaust tips yet the exhaust only comes out of 2 pipes.
A lot of cars have quad tips but its only 2 pipes coming back. And the exhaust still flows out of all 4 tips when the valves are open. The valves are only on 2 of the tips (one on each side).
Is kies Motorsport sending those for free ? 😁 seems like a lot of TH-camrs are getting these from KIES
They are not. I paid for this product. Kies is one of the only companies who sells Dahler products here in the states.
@@accelerated_motion it’s funny how you guys say Brian sent to me as if was a gift , like when I buy parts I have to say who sent me the parts 😄
@@Top_g80comp Kies is one of my sponsors, so I shout them out in my videos. I still pay for parts.
@@accelerated_motion if they are your sponsor you shouldn’t be paying for sponsorship 🤣…..
There is just no reason for this to cost $600.
Gotta pay to play. Most things for this car are extremely overpriced. Thats just the market.
@@accelerated_motion agreed... Would you say this scratches the itch of getting a whole new exhaust? I just picked up my g87 a few weeks ago and it just isn't loud enough. Feel like my x4m40i was louder.. This is currently a lease so I'm just not totally comfortable with hacking up the exhaust yet
@@brelaxed13
For me, it does scratch the itch of getting a new exhaust. I was actually surprised at how much louder the car got with the valves completely opened. It actually sounds pretty decent now. Especially if your vehicle is a lease, you can easily revert back to stock in a matter of minutes. And a lot of these valve controllers require wiring into the trunk for a power source. This is also why Dahler's version is so much better/easier. It just plugs into the factory harness under the car and everything is mounted out of sight underneath.
@@accelerated_motion sweet. Thank you very much. Going to buy it today.
@@brelaxed13 sounds good! You won’t be disappointed! Please consider using my affiliate link in the video description. It gets me some commission which helps the channel grow. Thanks!
Were the revs at the beginning of the video without the controller installed? Just changing the drive mode?
And what mode were you using at the end when using the controller?
Initial revs were stock. Toggling between valves open and closed.
End revs are after install with valves open
@@accelerated_motion at the end, do you recall what mode the car was in though? Wondering if those burbles were with comfort or if the car was also in sport+.
@@steveh5487 sport+ at the end
@@accelerated_motion much appreciated