Canada CWB Welding Check test(renew) FCAW(Flux core) 3FG/4FG
ฝัง
- เผยแพร่เมื่อ 12 ต.ค. 2024
- Canada CWB Welding Check test(renew)
FCAW(Flux core) 3FG/4FG
21.5 Volts / 250 Wire
Please turn on the captions and watch it in high definition!🔥
Don't forget to subscribe and like👍👍
Enjoy my videos, Thanks😎😎
#CWBwelding #FCAW #CWBchecktest #CWBrenew
Please turn on the captions and watch it in high definition!🔥
Don't forget to subscribe and like👍👍
Enjoy my videos, Thanks😎😎
Lovely weld thank you for this video I have a check test on Thursday
I would like to renew it every 3-4 years😁😁
2 years is too fast😭😭
Thanks for watching, Nala!😎😎
Siempre veo tus videos, eres mi idolo, que chingon eres 🥺🥺
สวยงามมากครับอาจารย์กิมจิ
ขอบคุณสำหรับคอมเม้นท์ดีๆนะครับ!
ขอบคุณที่ติดตามชมนะครับ😎😎
May I ask what equipment you used to record the video?
What’s up with the stops and starts when you start the bead on 4G? Is it to prevent drip so you get it nice and filled without getting that low spot in the beginning of the plate?
Hello,
Yes, you're right
It's to prevent it from flowing down😁
Thanks for watching!😎😎
Es fantástico y muy bonito..
¡Gracias por el buen comentario!😎😎
Güzel 👍
İzlediğiniz için teşekkürler!
영상 잘 보고 있습니다.
궁금한 게 있어서 글 적습니다.
처음 시작할 때, 두세 번 끊었다가 시작하는 이유가 무엇 때문인지 알고 싶습니다.
감사합니다.
안녕하세요,
끊지않고 바로용접을 시작했다면 물이 밑으로 흘러내리게 되었을겁니다(영상과 같은 상황기준)
몇번 찍어주면서 용융풀을 받쳐줄수있는 층(?)을 미리 만들어주는 과정이었습니다😁
시청해주셔서 감사합니다😎😎
is the gas your using straight co2?and are you letting it cool off every pass?
Аллилуйя 👏👏👏
Amen!😁
Wow 21.5 Volt.
Thanks for watching, Jack😎😎
@@kimchiwelder8410 what size wire?
0.45
22v under is short circuit might better use 22v-26v for globular
passed this last week. 24 volts 300 wfs 0.045 wire c-25 gas. would like to test how low you can pass the flat test
Anh ơi cho em hỏi chút. Em đang tập hàn 4G FCAW . Nhưng hồ quang chảy vào tay, mối hàn mô cao không bằng phẳng. Anh giúp em giải thích nguyên nhân với
Thanks for watching!
I left an answer in another comment!😁
토치는 당기시는거죠? 영상으로는 밀고 나가시는거 처럼 보여서요
Backing 是不是自己拆？
Khí bảo vệ là khí gì vậy bạn?
Hello
do you give me ask
I'm practicing welding 4G FCAW but the arc flows into my hand, and the high-tissue weld is not flat. Please help me explain the reason
Hello, duonglt89😁
An important part of FCAW welding is wire speed + welding angle + arc distance.
Changing the angle, keeping the arc distance close, and adjusting the wire speed, you'll get better results.👍👍
@@kimchiwelder8410 Thanks I will try
@@kimchiwelder8410 Wire speed should be fast or slow. Welding angle is 90° relative to the workpiece. Thanks
If you weld in many ways, you will get good results!👍👍
@@kimchiwelder8410 thanks. 🥰
What size wire 0.035 or 0.045
0.45!😎👍
Please is fcaw push or pull?
pull majority of the time, sometimes push when going uphill
You never push slag type weld bc then the slag is inclusion in weld always drag.
Volt 21.5 so cold At list must be from 26 ,8 volts
Lmao...would have done failed in Texas 😂. Test plates can't be a mile apart 🤣.... Seriously ...
Thanks for watching, Darrell😎😎
I'll try harder to get accepted in Texas, too😁😁
Aws structural test is way easier than Cwb since there is no stop and start 😂
@@pengahn2453and 1/4" root rather than 1/2" cwb
It spesific gap. It's not based on guess or setting where you want
Every weld procedure has its own specified gap lol what are you talking about?