How to use LoRa with Arduino | LoRa Tutorial with Circuit Code and AT commands | Reyax RYLR896
ฝัง
- เผยแพร่เมื่อ 20 ธ.ค. 2024
- In this video, I have shown how to use Lora with Arduino for different IoT projects. Here we will use the Reyax RYLR896 Lora module to design a Lora Arduino circuit that can control a relay module from 10 KM distance.
Purchase link for the RYLR896 LoRa Module:
Alibaba: www.alibaba.co...
Amazon: www.amazon.com...
eBay: www.ebay.com/i...
TechDesign: www.techdesign...
REYAX Indian Distributor: www.cparkb2c.i...
Before getting started with the LoRa module I suggest you to watch the complete video on Lora basic tutorial but you can skip any portion of the Lora tutorial video by clicking on the following timestamp.
00:04 What is LoRa and Lora features
01:19 How to set LoRa Bandwidth, Address with AT commands
04:30 How to connect Lora with Arduino
06:01 Lora Transceiver connection on Breadboard
07:00 How to connect Relay module with Arduino Lora circuit
07:56 simple LoRa Arduino code to turn on and off a light bulb
10:50 License free Band for LoRa module
Download the Arduino Code and Datasheet of the Lora Module from
easyelectronic...
During the video, we will discuss the different features of the Lora module and how we can send signal with the Lora device without using any WiFi or Bluetooth signal. Here we will use simple AT commands to send the signal from the transmitter circuit to the receiver circuit. This Lora Transceiver circuit is the best option for different IoT applications in rural areas. As the Lora range can be even more than 10Km so we can use this Lora circuit in agricultural land for controlling the water system, monitor moisture temperature, etc.
After watching the video you can easily design the Lora Arduino circuit for your upcoming IoT projects or home automation projects.
#LoRaModule #RYLR890 #TechStudycell
*****************************************
We need your support 🙏🏻 to make Tech StudyCell sustainable.
Help my projects on Patreon: / techstudycell
Feel free to donate any amount: paypal.me/sdaspay
*****************************************
-------------------------------------------------------
Thanks For Watching...
✅ SUBSCRIBE ✅LIKE ✅SHARE ✅ COMMENTS
Electronics Projects: easyelectronic...
Facebook: / techstudycell
Instagram: / techstudycell
Telegram: t.me/techstudy...
Twitter: / techstudycell
-------------------------------------------------------
Other useful videos:
How to control the light fan with smartphone Bluetooth
• How to Control room Li...
Bluetooth Module Tutorial | RYB080I BLE
• Bluetooth Module Tutor...
Bluetooth Module HC-05 with Arduino | Connections & Coding tutorial
• Bluetooth Module HC-05...
How to use 12V Relay module with Arduino to control High Voltage Devices
• How to use 12V Relay m...
How To Test All Electronic Components with Multimeter
• How To Test All Electr...
⚠ This video took a long time to make if you would like to buy me a coffee to say thanks, link below: ☕
PayPal: paypal.me/sdaspay
Patreon: www.patreon.com/techstudycell
Thanks for sharing. The LORA library for Arduino failed for me, but you proved that it was not even needed. My modules are working now. Cheers from Germany. (+5,13 USD - enjoy your coffee)
Thank you for explaining the AT commands. I am just getting started and did not realize that. You make excellent videos that help so many, you are kind to share your knowledge.
Thanks for your feedback
I have a question is there possible to transmit a signal to reciever the components of transmitter including fire alarm with sprinkler
Great Video indeed. But what to do if we want to switch it faster? There is a delay between transmitter input and receiver output. Thank you
Can we broadcast message from one lora node to all other lora nodes without gateway?
uick uestion. in this video you set up a sender and receiver. If I want to do both way communciation how can I resolve the 3,3V dillema. Is it at all possible to set it up with Arduino Nano or Uno. Or should I switch to Arduino Pro mini that works on 3,3V logic.
Loved this tutorial and subed; I hope to learn more,
As usual I didn't forget to smashthe like button before leaving.
Greetings from Tanzania 🇹🇿
You did not connect RST pin. Should it be connected and if so to which microcontroller pin
Thanks very much my dear for this nice video. Please, assuming I am having 4 receivers, how can I add a keypad on the transmitter side so that I will use the keypad to write the destination address of the receiver that I will like to communicate. The lcd or OLED display in transmitter side will be used to display the receivers destination address when I am typing them. Thanks very much for your understanding and concern. Please, I am waiting for your reply
Sir dono ko power DC motor se de skte hai ?
I'm just wondering the transmitter and the receiver are the same module?
And also what is the largest distance can be between the transmitter and the receiver
Sir Ji Namaskar and Happy Diwali
Sir ji mujhey iot with home automation training lene hai kya aap training class dete hai kya sir ji pls confirm and aap bahut aachey se sikatey ho thanks u r all videos great
Many thanks for your expansion. Using Bluetooth The code is written in Arduino uno What to do if want to switch to LORA now .
porque el tiempo de respuesta es tan lento en el minuto 6:31 se aprecia cuando pulsa el botón y tiene un retardo es un diseño en el código
Appka pass ehi same lora moudle milegakiya ??
Indiawala purchase link kaha pe hai
App courier karsakta hai ?pleas app jogar karke dijye
Can we use 2 or more lora transmitter with 1 lora transmitter?
How far it's range? Have u tested it's range without modification in antenna and hardware part ?
What's the range of communication?
Hi, very nice set up. I have a question though, how you make sure other devices don't trigger that same led? I ask this because there is no address set for the devices on you code to filter out other external devices messages.
Super ! Is this assembly bidirectional? Thank you
thank your video is great but im thingking if it is possible to have multiple Transmitter with only one receiver. Do you have example for that
When I set my Frequency Band, I receive the +OK, am able to confirm the change, however after removing power and powering back on, the band reverts back to the previous band. Any ideas? I was able to set 2 modules last week and am unable to change them now.
Can use an remote relay control to pair with the receiver?
Is it possible to send 2 lora transmitter data to the single receiver lora at the same time ?
great project but i need momentary switch pls let me know for momentary program
Bhaut achha sirji , sirji ispe momentry operation kaise hoga batye please.
I want to maximum 8 channel out put relay in reciver circuit.
And 8 pushbutton for remote control .
Relay operation momentry hona chaye plese.
Push button pressed to relay out
Pushbutton release to relay stop.
Please please help sirji.
Ir sensor with timer circuit plz
Is it possible to set multiple transmitter and one receiver using this setup? thank you..
i wanted to use this lora module to transmiting wiegand reader data but i wasn't aware that this module has a big dealy. Can you recommend any good solution wchich i can use to solve my problem . ?
How to set Frequency 865 MHz ??
I am trying same using uno bt i am getting lora sending failed neither At command is working
Hi. Thanks for this video. Is it possible to control with one transmitter few receivers? Led1 will turn on led on 1st receiver, led2 will turn on led on 2nd receiver and e.t.c.
Great video! Very interesting and informative. What would I change in the code in order to get the LED to turn on while pressing the button only and turn off when not pressing the button? Again, thank you for the great videos.
Thank you for the video. Can this Tx circuit connect to a Lora gateway as a way to control and watch sensor data in a IoT platform? How long would the battery last with this LED cricuits Rx and Tx?
one lora rf module can connect to how many other lora rf module ?
Is data transmission is secure
Very good but can you use the onboard esp32 chip and do away with the Arduino?
I give 10 out of 10. Thanks for great video
You are welcome
Can we transmitt audio or voice?
Nice presentation. Thank you.
Do you think that IT will work in a Subway.. IT IS under 30 underground
is the signal affected by concrete walls?
i am keen to develope the same however i have a lora RA02 , kindly guide
After typing "AT" it send a result f +ERR=1
what you i do? thank you
Thanks for the video. can i used it in europe ?
Projest was very nice
But Transmiter to recever response time is very low
How fix this problem?
What is the maximum communication distance between tx and rx
salve per avere il progetto completo ?
Band rest automatically...😢😢any solution?
can we use camera module with this, and can we send photos and video though it
I don't think so.
Awesome video, thank you 🙏
This video is very useful, Detail explanation. This reyax module is expensive and non availability in India, Hence do you any other lora module where we can set 865MHZ and configure it. Let it be AT command or UART communication.
The module is expensive in Amazon.in. If you get it from a supplier, it will be cheaper. Check out CPark Solutions in Bangalore. I buy from them for < Rs. 2000 regularly.
thank u so much for detailed tut, would u make some more videos using this LoRa module like water level and automatic pump on off using this module and other projects?
how much distance maximum will it work?
Can u give Proteus simulation for this project or help me out
É possível usar outro modelo de modulo , mais acessível?
I did exactly what you did, still mine is not working. Would you assist me?
Can you develope the same project using LoRa RA02 aithinker
Bro how to turn off and on more than 6 bulb with thise
Please refer the following video
th-cam.com/video/2aM5NPlFu3s/w-d-xo.html
@@TechStudyCell thanks for your reply but how can i write code to increase n number switches to control n number of output
pl ease can you explain how to send pir sensor data from one lora module to another
Priyanka Rocks10aug You would include the information in the string sent with the AT SEND command. Build the string before the serial write operation.
Can we use lora ra02
Hi Thanks for this video.Can you please send ne the link for the drivers to communicate throught serial port
I have used Arduino IDE
wonderful project .. kindly share the link to purchase the lora module and download link of the code for Tx. and Rx a great work
I have mentioned all the link in the Description.
Download the Arduino Code and Datasheet of the Lora Module from
easyelectronicsproject.com/arduino/lora-arduino-control-relay/
Wow~ What a helpful video~! Thank u.
দাদা আপনি কী পরবেন এই দুটো লড়া moudle জোগার করে দিতে
পরলে খুব ভাল হত।🙏🙏🙏🙏
How to make Radio control plane 6ch use lora
Bro insted of push button can we use normal button. If it is possible please give me code 🙏 please
Great project! This video, have legends? Tnks!
Great job!
I will try making this project plz provides code and circuit diagram
শুভজিত দাদা প্লিজ একটু হেল্প করুন।
RYLR896 কত দাম?
Helpful video 👍
Thanks
how can i contact you??
what does it mean 6 in "serial.println" function?
Berkay Uysak Looking up the AT command reference from Reyax, the 6 refers to the address of the receiver as configured in the setup.
I made this project , but it's range is just 300 m ! Why ?
Range depends where you are using it. If it is rural area then number of obstruction will be less and range will be higher
सर मुझे चार चैनल आन आफ स्विच की आवश्यकता है जिसमे सभी का अलग अलग स्विच चाहियेे क्या आप मेरी मदद कर सकते है जानकारी प्रदान करने का कष्ट करे
Can we use 800MHz fr. bandwidth in india?
No. 865MHz.. Please google it.
Cool project.💪
Thanks! 👍
I'm from Brasil.
Your vídeo is Very good.
Congratulations
Thanks...
Can we use LoRa module in RC transreceivers instead of NRF module?
I am also having the same doubt friend.
please send me a link from aliexpress that i can buy same 2 unit rylr896 as same as you have
Please refer the video description to get the purchase link.
Can i use this lora module in india? This module will work in india?
Yes.
Sir Code is not downloading
Plz sir how to make this project help
If you face any issues, let me in comment section
@@TechStudyCell sir provides codes
is it illigeal to use
Depends on country. In India 865MHz band is allowed.
Did u actually accomplie 10 km??
The 10 km range is for the rural area. In town the range will be less.
Reyax uses 800mhz frequency and is no more available in the market .
The advantage of this module is it can be programmed with at commands.
However 433 mhz according to me gives better range hence can we replace eeayx with l Ra02 module
433Mhz is not allowed in my country.
Make an sensor data reading wirelessly
Your country band 865000000, and whree i can find my country band?
In my case, I have Google it.
Thanks for sharing...
Thanks for watching!
Nice 👍
Thank you
Welcome
noted
Sir plz provides code
Please visit our website and download the code. Link given in description
👍
Hindi video banaiye
Planning to make separate Hindi channel
Sir mujhe ek project chye plz apka mob no do ?
You can ask here...
Sir mujhe water level ka project chaye wireless lora module use Karke anti corrosion type level magnetic float switch. Plz help mere pass lora ryl896 module hai
nice sharing....let me follow your chanel....
Llor inglis is beri güel
Does anyone looking job related to this video, please reply we are looking candidate for same
Yes I want