part 1 YANHUA ACDP KEY BMW PROGRAMMER customer review
ฝัง
- เผยแพร่เมื่อ 25 ธ.ค. 2024
- in these videos i show you the YANHUA BMW key programmer that claim "no solder" cas3/cas4 but in this video you see all that is wrong with using this programmer. this is a long video and their much to say about it.
it can fail on bad pins but just need to rub the surface like you said. i have used it loads. i will make a video fresh and see how much attempts. i think its a great tool
Where's the video you supposed to make ma man?
Please shear me the link if so.
You're clearly touching the circuitry while it's in operation. I'm surprised there isn't smoke coming out.
I’m using this ACDP for long time and never had any problem. To clean the pins for good contact, use pure Aceton, with cotton, and you’re good to go. I love ACDP, it is amazing tool to program keys.
hi how can i contact you? whatsapp / viber? I just bought this device and until he arrived I want to ask a few questions about working with it in order to do everything safely, here is my number if you don’t want to give your contacts, I have both viber and whatsapp +79114736958
Can you use it to program Cas3++ Istap by obd?
why you always touching ant shaking board during conection? its not positive to do this for sure
Dam. He is moving the board quite a bit. It seems like he's doing it on purpose. Does he work for a competing company?
Very good review from a real user.
while you're waiting you're suppose to try something different not just wait, like putting slight pressure or not moving the board the whole time; just keep that in mind.
The problem with the connection issues are 100% the "main ACDP unit" .... I had the same issues out of no where with mine..cleaning the boards...cleaning the pads/probes/ect....everything for hours and hours...traced it down to the main unit gone bad.... got another main unit and everything working perfect again...
I think you have an old version of the software, I just did a CAS 4 in less than 5 min. No problem detecting the connections or reading CAS.
Thank you
We don’t, and will not, solder!
What do you recommend?
Going through the same thing since day 1 it's a joke... Bav key never worked Once and they refuse to help
did you ever get your problem resolved?
Very good info buddy! Real review
The Problam that it’s of Connection it’s cuz the your power supply cable not good ...
why do you say power supply? it looked like the app was telling him the voltage was fine?
dude dishonest review. you have been keep moving the cas whole time. you think it work like that. you should put the board in shaker and try
I agree with you
Nah, the video is right. This is totally time wasting out on the field. its faster to just solder the 5/6 wires and be done
not BT?
When he stopped moving it, it magically connected. 😆
Why if you have connection, you move the cas3 and the acdp all the video in some times you shake it !.
Even though you got that tool to program you still got to take it apart
good review thank you
What programmers do u recommend instead of this one
I've had great luck with CG Pro on CAS3+ and CAS4+, it runs like $300. The CAS boards have a conformal coating that essentially requires soldering to make connection. The soldering is fairly tiny, so some skill is required. CAS4 requires removing a component and cutting a circuit trace, CAS3 just needs you to tack the wires on.
this is a great tool i think he has old software aswell
Plz haw match
why can't Americans pronounce the word solder correctly
Too much b*******you might have soldered it