If anyone questions why having professional installers doing the work is expensive, just show them a couple of your videos. It takes a lot of work to do the job correctly. Another great learning moment, thanks guys.
Hi, I hope you can solve my problem instaling the Kenwood stereo in my 2013 Jeep Wrangler JK. I purchased the folllowing items. 1. Kenwood DNR476S Stereo 2. Maestro RR2 Radio Replacement Interface 3. Maestro HRCH1 (HRN-HRR-CH1) installation Harness 4. Maestro KEN1 T-Harness to Kenwood Radio Adapter 5. CRUX MG-3 Rear-view Camera integration (for factory analog camera). All these are plug and play kits. I flashed the Maestro RR2 as per the instructions. After the installation I notice there is a power to RR2 interface with 2 green flashes in the begining of powering process for first few seconds, but no green flashes after that (I'm not sure that's normal). However I noticed there is power (noticed in yellow wire) till the KEN-1 T-Harness connector to the radio. My problem is the Radio is not switching on. I checked all the fuses and they are good. Please find me the solution. Thank you. PUBBY.
Great video ! I want to replace the cigarette lighter socket with hdmi / usb c sockets too. What do I do with the old cigarette lighter power and ground cables ? Do I just wrap black electrical tape around them and then tucked them somewhere?
Yeah I used the usb adapter to try to retain the port in the arm rest. Android Auto comes on, but in 10 seconds or somewhere around there, it stops. It acts just as if I unplugged it, and the head unit goes back to the radio/home screen. I plugged my phone right into the head unit and bypassed the adapter and everything just to see if it'll work, and it does. Is there a way to fix this? Or am I just out of luck.
how do you connect the master in a dodge durango? I'm not a professional but I want to learn and I'm going to install it in my Dodge Durango 2016. I love your videos. thank you
Good video guys. I have two question I hope you don't mind answering: 1. What is the HDMI/USB/CBL product you are using? I found one but it is not USB-C. Do they make a USB-C + HDMI combo like that? Or just USB-A only? 2. Where exactly are you mounting the microphone? It was kind of dark in that scene and I couldn't really tell
Hey guys I’m currently in the process of doing this as well in my lancer evo. The car came with factory rocksford amp and I wanted to put in my pioneer 2300nex so I bought the idatalink maestro and t harness that suppose to go with the Rockford factory amp and to keep sw controls. I also wanted to put in a reverse camera since I’m going to this as well. I flashed the the module but I noticed that when I was setting up my harness that comes with I datalink it has a yellow rca that says reverse camera that suppose to hook up to the purple trigger wire. What I’m confused is what do I do with the yellow rca end of the one that comes with the camera that suppose to be plugged in the head unit? Which one rca end is the one that needs to plug in so I can use the camera?
What is the brand of the tool to change the wires from a plug, what you call your repining? I live in the Netherlands and I can’t find a tool for that.
I know it's normal,, but the sound of panel clips popping, always sounds so horrible to me. Maybe it's just lingering trauma from my younger days, when I've broken clips.
Nice Job Guys! I was wondering how your business it’s gonna be afectes now that the car industry it’s going full electric. I don’t know if you have a video talking about this topic or if you have talked about this on any of your live streamings… I would like to know a little more about this… take care guys!
I have a question...I installed the same setup in my jk about a month ago. When i turn on the lights during the day the radio goes into dim mode, but does not go into dim mode at night. Do I have something reversed?
If anyone questions why having professional installers doing the work is expensive, just show them a couple of your videos. It takes a lot of work to do the job correctly. Another great learning moment, thanks guys.
I like when Fernando starts the vid.
Great Job as usual Gents.
It was real cool seeing Nando starting the vid. 👍
Initially thought it was going to be a total solo vid with Dean currently out in Austria...
Way to go Fernandioux,,,, very nice to see you doing the introduction of the video!!!
Excellent video and professional
Clean install like always! Great job guys!
Hi, I hope you can solve my problem instaling the Kenwood stereo in my 2013 Jeep Wrangler JK. I purchased the folllowing items. 1. Kenwood DNR476S Stereo 2. Maestro RR2 Radio Replacement Interface 3. Maestro HRCH1 (HRN-HRR-CH1) installation Harness 4. Maestro KEN1 T-Harness to Kenwood Radio Adapter 5. CRUX MG-3 Rear-view Camera integration (for factory analog camera). All these are plug and play kits. I flashed the Maestro RR2 as per the instructions. After the installation I notice there is a power to RR2 interface with 2 green flashes in the begining of powering process for first few seconds, but no green flashes after that (I'm not sure that's normal). However I noticed there is power (noticed in yellow wire) till the KEN-1 T-Harness connector to the radio. My problem is the Radio is not switching on. I checked all the fuses and they are good. Please find me the solution. Thank you. PUBBY.
I have the same issue, with the equivalent Kenwood, did you ever figure it out?
Man I wish a new a car stereo place in Phoenix or surrounding area that has your skills.I have a full car system I need installed as we speak.
Great video !
I want to replace the cigarette lighter socket with hdmi / usb c sockets too.
What do I do with the old cigarette lighter power and ground cables ? Do I just wrap black electrical tape around them and then tucked them somewhere?
Nice build. Thanks for the content
Pro install👍🏻
Yeah I used the usb adapter to try to retain the port in the arm rest. Android Auto comes on, but in 10 seconds or somewhere around there, it stops. It acts just as if I unplugged it, and the head unit goes back to the radio/home screen. I plugged my phone right into the head unit and bypassed the adapter and everything just to see if it'll work, and it does. Is there a way to fix this? Or am I just out of luck.
how do you connect the master in a dodge durango? I'm not a professional but I want to learn and I'm going to install it in my Dodge Durango 2016. I love your videos. thank you
Good video guys. I have two question I hope you don't mind answering:
1. What is the HDMI/USB/CBL product you are using? I found one but it is not USB-C. Do they make a USB-C + HDMI combo like that? Or just USB-A only?
2. Where exactly are you mounting the microphone? It was kind of dark in that scene and I couldn't really tell
1 not yet
2. In the factory mic location
Hey guys I’m currently in the process of doing this as well in my lancer evo. The car came with factory rocksford amp and I wanted to put in my pioneer 2300nex so I bought the idatalink maestro and t harness that suppose to go with the Rockford factory amp and to keep sw controls. I also wanted to put in a reverse camera since I’m going to this as well. I flashed the the module but I noticed that when I was setting up my harness that comes with I datalink it has a yellow rca that says reverse camera that suppose to hook up to the purple trigger wire. What I’m confused is what do I do with the yellow rca end of the one that comes with the camera that suppose to be plugged in the head unit? Which one rca end is the one that needs to plug in so I can use the camera?
With the Maestro Interface & Alpine Premium System is the Customer able to have Complete Fader option ???
Does it retain brake services and hill assists for jeep cherokee 2015 with any car audio with an idatalink port?. Thank you
What is the brand of the tool to change the wires from a plug, what you call your repining? I live in the Netherlands and I can’t find a tool for that.
With a manual transmission where do you plug in the power wire that’s with the rca camera in input at the back f the stereo with maestro rr
Ok. Did the OBD2 line go into the stereo or iDatalink Maestro?
So, If I make a T harness and use speed wire and keep the Subaru 11.2" pad that has stereo, etc. in it, then do I need Maestro equipment?
I know it's normal,, but the sound of panel clips popping, always sounds so horrible to me. Maybe it's just lingering trauma from my younger days, when I've broken clips.
Great video guys! Does anyone make a large 9” or 10” touch screen system with Maesteo iDatalink and all the factory sat and controls with Carplay?
Nice Job Guys! I was wondering how your business it’s gonna be afectes now that the car industry it’s going full electric. I don’t know if you have a video talking about this topic or if you have talked about this on any of your live streamings… I would like to know a little more about this… take care guys!
This is why they stay on top of OEM integration products. The manufacturers who are ignoring this trend, won't be in the game in 10 years.
The industry will survive as long as there's money going to it.
Those lights can be a pain to remove sometimes.
what does the 8 pin connector at 7:31 do?
I have a 2013 Ford edge and the dash kit for it is so expensive 😫 any other options out there?
Nothing really cheaper. Just another route.
I have a question...I installed the same setup in my jk about a month ago. When i turn on the lights during the day the radio goes into dim mode, but does not go into dim mode at night. Do I have something reversed?
Does it have auto turn on driving lights? Only thing I can think of.
@@jonanderson4474 ...no sir