I would like to know after the set up of number of port in the beginning the device that show up are they default or link to the setting we program in ETS?
Thank you for these videos. I keep getting an error through when I try to perform 'full download' to the push buttons. 'Individual address already in use'.
About 6.28 you indicate what you have prepared in ETS. I'm trying to follow through your video with a demo version of ETS, but I can't work how to add these devices. When I try to add a device ETS shows a catalogue and I have no idea what I should choose or how otherwise to add the appropriate devices. Appreciate if you might explain this basic step.
Thanks I located the "KNX Association" under manufactures and can find and add "Switching Actuator", "Dimming Actuator", "Blinds Actuator", but there is no "Push Button" actuator listed which I can add. Can you give me any clue as to how I could get that?
Thanks for that. I had looked at the link you supplied. However, once I added the KliX (although initially I added the wrong KliX device) I was then able to work through the rest of your tutorial. I really appreciate your detailed explanation of all the steps. It was very clear once I got through the initial steps which you assisted with.
hello, when i downloaded the virtual KNX I got just one exe file and when I am running it looks different. the buttons and the labels nothing works as the video. should I have a specific setting for that?
The video could indeed involve an older version. See also: Release Notes: support.knx.org/hc/en-us/articles/360009998460?source=search&auth_token=eyJhbGciOiJIUzI1NiJ9.eyJhY2NvdW50X2lkIjoxMjc3NTY4LCJ1c2VyX2lkIjozNzkzNjg0OTUyMTksInRpY2tldF9pZCI6MTg3MDEwLCJjaGFubmVsX2lkIjo2MywidHlwZSI6IlNFQVJDSCIsImV4cCI6MTYxNjc0MzY1OH0.z-bYJp8Hlq7zu6x5BF5-8GAXRbwdQse04NjpfhxBlWU
an error prevent me to drag and use virtual devices or even download it error massege "An internal error occurred. Type 'Knx.Ets.Converter.ConverterEngine.Exceptions.UnsupportedNewerSchemaVersionException' in Assembly 'Knx.Ets.Converter.ConverterEngine, Version=4.0.1997.50261, Culture=neutral, PublicKeyToken=61439873ec5e1159' is not marked as serializable."
Dear mohammed,We are sorry to hear that you have problems with our software. Could you please generate and send us the diagnostic files as described here:Best regards,
Dear mohammed, Thank you very much for your feedback. If you however think that you need to add more feedback, you can always reply. // Best regards, Vassilios
When I open KNX virtual my interface looks very different. It seems like you made some setup before making this video. I'm not able to follow this tutorial. When I go to Base View all the grey buttons on the left side are titled "____x". Can you reference a video in which you are making those changes? Also when you open ETS you already have a basic setup finished. Can you reference a video I can follow to replicate this setup?
Dont know if you guys cares but if you are bored like me during the covid times then you can stream all the latest series on instaflixxer. Been streaming with my girlfriend for the last months :)
It's great that KNX Virtual exists and that it has been made freely available. Anyone looking at this should be aware that a newer versions of KNX virtual exist, and while this particular video is still very helpful the devices within KNX Virtual have been renamed in the newer versions. The newer is video at th-cam.com/video/TAnA2ua3iEo/w-d-xo.html and details aspects of this.
Good day, thank you for your time and help.A small question,, there is any explained in German language ? Thank you again.
I would like to know after the set up of number of port in the beginning the device that show up are they default or link to the setting we program in ETS?
thanks for this video and i have a question, what brand of devices that you added in ets project?
so sorry i'd read your tutor on myknx, thanks!
Thank you for these videos. I keep getting an error through when I try to perform 'full download' to the push buttons. 'Individual address already in use'.
this is not an error, it only states the facts
indeed, this will improved in one of the next versions
About 6.28 you indicate what you have prepared in ETS. I'm trying to follow through your video with a demo version of ETS, but I can't work how to add these devices. When I try to add a device ETS shows a catalogue and I have no idea what I should choose or how otherwise to add the appropriate devices. Appreciate if you might explain this basic step.
Under KNX Association you will find 'KNX Virtual' device type
Thanks I located the "KNX Association" under manufactures and can find and add "Switching Actuator", "Dimming Actuator", "Blinds Actuator", but there is no "Push Button" actuator listed which I can add. Can you give me any clue as to how I could get that?
this product is called 'KliX', for more information: support.knx.org/hc/en-us/sections/360000827779-KNX-Virtual
Thanks for that. I had looked at the link you supplied. However, once I added the KliX (although initially I added the wrong KliX device) I was then able to work through the rest of your tutorial. I really appreciate your detailed explanation of all the steps. It was very clear once I got through the initial steps which you assisted with.
hello, when i downloaded the virtual KNX I got just one exe file and when I am running it looks different. the buttons and the labels nothing works as the video. should I have a specific setting for that?
The video could indeed involve an older version. See also: Release Notes: support.knx.org/hc/en-us/articles/360009998460?source=search&auth_token=eyJhbGciOiJIUzI1NiJ9.eyJhY2NvdW50X2lkIjoxMjc3NTY4LCJ1c2VyX2lkIjozNzkzNjg0OTUyMTksInRpY2tldF9pZCI6MTg3MDEwLCJjaGFubmVsX2lkIjo2MywidHlwZSI6IlNFQVJDSCIsImV4cCI6MTYxNjc0MzY1OH0.z-bYJp8Hlq7zu6x5BF5-8GAXRbwdQse04NjpfhxBlWU
how to add catalogs for(virtual KNX) to ETS ?
please see: Online Catalog: support.knx.org/hc/en-us/articles/115001825104-Online-Catalog?source=search&auth_token=eyJhbGciOiJIUzI1NiJ9.eyJhY2NvdW50X2lkIjoxMjc3NTY4LCJ1c2VyX2lkIjozNjg5MTcwNzg4NTksInRpY2tldF9pZCI6MTczMTc1LCJjaGFubmVsX2lkIjo2MywidHlwZSI6IlNFQVJDSCIsImV4cCI6MTU4ODE0NTk5N30.p0l-Jguju1slEaDuyzyEoVKdIV-VPB2aYXCVkIaIhNo
an error prevent me to drag and use virtual devices or even download it
error massege "An internal error occurred.
Type 'Knx.Ets.Converter.ConverterEngine.Exceptions.UnsupportedNewerSchemaVersionException' in Assembly 'Knx.Ets.Converter.ConverterEngine, Version=4.0.1997.50261, Culture=neutral, PublicKeyToken=61439873ec5e1159' is not marked as serializable."
Dear mohammed,We are sorry to hear that you have problems with our software. Could you please generate and send us the diagnostic files as described here:Best regards,
KNX Association thank you i installed the latest version and the issue solved
Dear mohammed,
Thank you very much for your feedback. If you however think that you need to add more feedback, you can always reply. // Best regards, Vassilios
When I open KNX virtual my interface looks very different. It seems like you made some setup before making this video. I'm not able to follow this tutorial. When I go to Base View all the grey buttons on the left side are titled "____x". Can you reference a video in which you are making those changes? Also when you open ETS you already have a basic setup finished. Can you reference a video I can follow to replicate this setup?
Same problem that I have, it appears unloaded
Can I download online knx product catalog in ETS5 license demo?
Can I use kNX virtual with ETS license demo?
why in my KNX virtual software the PB and Switching devices are secured?
Dont know if you guys cares but if you are bored like me during the covid times then you can stream all the latest series on instaflixxer. Been streaming with my girlfriend for the last months :)
@Warren Logan Yea, been using instaflixxer for years myself :D
@Warren Logan Definitely, I've been watching on instaflixxer for since december myself =)
@@karsynmack2874 SCAAAAAMMM
@@stanleyarthur3062 SCAAAMMM
It's great that KNX Virtual exists and that it has been made freely available. Anyone looking at this should be aware that a newer versions of KNX virtual exist, and while this particular video is still very helpful the devices within KNX Virtual have been renamed in the newer versions. The newer is video at th-cam.com/video/TAnA2ua3iEo/w-d-xo.html and details aspects of this.
is knx virtual work with ets6 demo ?
i canot download KNX virtual any one can help me?
gibts den Schmarn auf deutsch?