I followed the directions in the instructions and couldn't get it to work to save my life--I watched your video and everything went PERFECT!!! Thank you very much Tim
I went back - reset it and carefully did everything - and everything worked great. This is by far the best video on setting this particular digital lock up. Thanks so much for the clear instructions.
I was using the Brinks video over and over then I clicked on your video and come to find out brinks skipped a major step. Thank you so much I followed you all the way and it worked in less than 3 mins
Hands down the easiest tutorial to follow! I was able to change my code on my first go round.. very well delivered, super simple to follow. Thanks a million ❤
Best walk through , I was at a loss with other videos, was going to buy a new lock, Thank you, this saved me, I can't belive how simple it is, and how great you explained it
Thanks! I've tried reprogramming with other tutorials and failed miserably. I almost changed the lock. I needed to reprogram it after an acrimonious separation, for my safety. You're a lifesaver. I really couldn't afford to replace it
Thank you!!! I needed to change mine from what my sister had when she lived here and not even the videos from Brinks themselves helped. I followed what you did exactly and it worked.
Thank you for this video! I've had this lock for 10 plus years now and just want to change the code. I couldn't remember anything. Lol thank you again!
Hi !!! I did change all the code . I only remember the lock code I put ... What do I do because I don't remember the programming code I put. Please and thank you!
This is a very well done video - However - I changed my lock on a garage door that was right handed to an exterior door that is left handed. I reset the lock and when I run the left/right hand identification process - I get an error. I did follow the directions by making sure the latch was turned to the right at 45 degrees. But - either way I get 3 red beeps when doing the procedure to identify if it is left handed or right handed. This is obviously an error - How do I resolve???
@@elitesportsmedia You are very much welcome. You earned a sub. Yeah instructions didn't make sense so I did research. And you were the only one that explained very good and step by step and straight to the point. I appreciate your channel. God bless you. ^-^
Mine won't do the left handed right handed step. It'll change the program codes and user codes but then nothing works. I reset and it still won't do step one. Should I take it back apart? I only get three red beeps
You are awesome!! I read the directions, watched the video from the Brinks company and it wasn’t working! Watched your video and it worked like a charm!!!
Ok, but how about if my direction is incorrect (left/right hand door)? When I do the 0000 brinks and 0brinks, my lock doesn’t cycle, I just get a red light. Tried it over 10 times. If I do it with it “locked”, it cycles but I can’t get it to accept new codes.
Question perhaps u can help…I’m guessing I have a right handed door as the knob is on the right side…originally it was installed on a door with the knob on the left…new door is on the right…so I installed it and the keypad function is like backwards…I have to put in the code then brinks to lock it…which isn’t right you should just hit the brinks button…then when I unlock it the code won’t work but if I just hit the brinks button it unlocks………Do you have any clue what could be causing this?
I have a kwikset 264 but it’s named gate house and I reset it but the lock doesn’t come out when I enter the program code 0000 kwikset 0, and it already knows which way it comes out to lock when it didn’t come out when it’s supposed to, is that normal?
THANK YOU X A MILLION. OMG you explain it so much better then actual lady. Idk what she does but yours is different. I think the 1234. I love that you got straight to the dang point. I was able to go right along with you!!!!! And I like that you gave your opinion at the end cause at the beginning it makes people skip Ahead and miss essential info. Your a blessing to the whole world omg thank you Thank you Squeeeeeeeze yayeeeeeee
Hello. I'm not sure whether or not you have figured it out. But you can delete the preset "1234" factory code, or any code you set. I just did it right now and I tried 1234 and it doesn't unlock anymore. Watch this short video th-cam.com/video/CQtvYl0n11Q/w-d-xo.html
That I have not tried just yet, I’m interested in it however, I got a ring camera and am curious if I would be better off with a ring device but I like the door lock still
I bought a large white trunk to store my infant niece’s stuff in th-cam.com/users/postUgkxNuLbiXpLQ-mKH5NlyjrNe88hiCk2N3Cg , as she comes to my house frequently. For now, it’s toys on one side and diapers, wipes, and other baby care items on the other. As she gets older, it will be all toys. I had originally wanted a trunk with a hinged lid, but I was afraid of her smashing or pinching her fingers in it. This will be a much safer option. The lid has great padding in it and it is actually nice to sit on. It feels very sturdy and secure. Looks like it can be wiped clean easily. If it gets abused by her, I won’t be terribly upset because I paid less than $50 for it on Prime Day.
I either have a different model or there’s a difference between these instructions and doing this process for a left swing door. These instructions work up until the 1:35 mark, when I try to enter my pc code it flashes red not yellow.
8 Adjust The Turnpiece a. Turn the Turnpiece left (Counterclockwise) for installation on a right-handed door. b. Turn the Turnpiece right (Clockwise) for installation on a left-handed Mine was a left handed door the only difference is right at the behind when turning the inside lock you turn to right it won’t let me share pics
Hi please one advice I am stuck in 0000+4+brinks and nothing happened and I can't move to the second step I did the reset and still the issue, easy working good just we decided change the code and start this problem thank you very much
Is there a possibility the locking bar? Is aligned wrong? I have it up, but I get the programming error 3 red flashes after. Deadbolt isn’t “smooth” but it locks.
Yes it’s possible that usually means programming issue, but you wanna make sure it’s smooth, I wish you could share video in chat or pics. I would try resetting the programming a again and screw the locking bar back in again and just double check position make sure screw are not it too tught
Hello ok I did everything and it went well but how about to lock it as you’re going out it won’t lock only to unlock it will work can you please explain it to me thank you
Your video was very helpful.. I was set up in the same time it took you to demonstrate the procedure for programming. As for the written instuctions that came with my unit, had me scratching my head like a monkey looking at a math problem for the first time, LOL
Yes it is easy to understand this video. But all it does is add a new code. So you end up with two codes. If you lock the door back after your new code is accepted and working if you try the 1234 code it will still work as well.
Are the hinges installed on your left from where you're standing? That means you have a left-hand door. If the hinges are to your right, then you have a right-hand door.
I have tried to reset this lock several times, but I can’t get it to reset. I press and hold the reset button for 5+ seconds and it still won’t reset. I’ve done this several times now.
@Tim Wetzel changed the batteries. I finally was able to "reset" the lock once, but it's not the type of reset you're thinking. I held the reset button while I was putting in the batteries, to my surprise it did not beep it just recalibrated and reset the user codes. Now I'm unable to change the user code, because the settings code does not work. Tried everything.
I did exactly what you said, and it's work but when I tried the old pc still working with my new one at the same time, how I can delete the old code the 1234
I am trying to change code reset it and it still beeps red after I do the 4 0s brinks 0 brinks and no unlocking for me to reset it won't let me use any code to set a new number
Try this Step 1 Your Brinks Digital Deadbolt won’t work electronically if you’ve just installed it for the first time or restored factory settings. You need to perform the Door Handing Detection before it works electronically. Here’s how to do it: Enter the default Programming Code (0000) and press the BRINKS button. Next, press 0 and then press the BRINKS button again. Step 2 If you didn’t just install your lock nor restored factory resetting, but it’s not working, chances are the batteries are low or not properly placed. Check that the batteries are correctly placed or replaced with 4 new AA alkaline batteries. Step 3 Your lock is still not working after the above steps? Remove one battery and then press a few buttons on the keypad to discharge electrical signals. Now put the battery back. This should fix the problem. But if it doesn’t, then factory resetting is your best bet.
I've done everything u said and programmed my new code, and it works. The problem is the 1234 code still opens the lock as well, how do I stop that code from working
@@elitesportsmedia I've gone through the process 3 different times and every single time the 1234 still opens my door. My new code works, but I can't the default code to go away
I just installed one of these locks and everything works fine except that I always need to wait 2 seconds between key presses. Any idea what's the problem? I also tried resetting the lock but that didnt help either. It's driving me crazy having to wait 8 to 10 seconds to unlock my door every time!
@@elitesportsmedia I was wondering if I overtightened the screws and somehow bent the board. I unscrewed everything and also made sure the wire was snugly connected. It works fine now, thankfully.
Hello. I know it's been 2 months and I'm not sure whether or not you have figured it out. But you can delete the preset "1234" factory code. I just did it right now and I tried 1234 and it doesn't unlock anymore. Watch this short video th-cam.com/video/CQtvYl0n11Q/w-d-xo.html
It’s not accepting the new code or it’s setup for the wrong side door like left hand side door instead of right hand … let me know and I’ll try to help you
I have followed your instructions in this video, and it has done everything same as yours. Except when it's all finished and I go to lock my door, it will not unlock with the code....
@@elitesportsmedia I ended up getting in touch with customer service. For my reset, I needed to take out the far left battery. Then when reinserting the battery, at the same time hold down the reset. Once this reset worked I could then program new code.
I threw that instruction book in the trash!!! They need to give you a dollar for every person that watches this video! Thanks for the help.
Lol I did the same thing that thing is horrible, appreciate the awesome comment !!!
But what if it didn't extend with the right ir left step?
I followed the directions in the instructions and couldn't get it to work to save my life--I watched your video and everything went PERFECT!!! Thank you very much
Tim
You have just helped me do what I have been trying three days today with no success! Thank you so much!
I went back - reset it and carefully did everything - and everything worked great. This is by far the best video on setting this particular digital lock up. Thanks so much for the clear instructions.
Bro, your vid was more prolific than the actual company videos, much appreciated
Means a lot thank you very much!
I was using the Brinks video over and over then I clicked on your video and come to find out brinks skipped a major step. Thank you so much I followed you all the way and it worked in less than 3 mins
Really appreciate your comment!! Glad it worked for you, I struggled for a min to figure it out
Hands down the easiest tutorial to follow! I was able to change my code on my first go round.. very well delivered, super simple to follow. Thanks a million ❤
Thank you so much means a lot
I am not able to reset it
Brother you are the best ever. I tried so many times with the Brinks instructions and i couldn't do it. I look at yours and i made it.
Best walk through , I was at a loss with other videos, was going to buy a new lock,
Thank you, this saved me, I can't belive how simple it is, and how great you explained it
Thanks a lot just glad I was not the only one struggling with this
Thanks! I've tried reprogramming with other tutorials and failed miserably. I almost changed the lock. I needed to reprogram it after an acrimonious separation, for my safety. You're a lifesaver. I really couldn't afford to replace it
This is the best video and only video I have been able to follow to reprogram my door. Thank you!
Best video on this topic. Thanks, Tim. Very useful and easy to follow.
Thank you for the simple instructions. I have no idea why the lock manufacturer's instructions had to be so complicated and wrong.
BEST AND THE EASIEST. Down right to the point no bs. Would recommend this one to everyone. Thank youuu!
Yeah!!! I appreciate you that!! Thank you
Just had to do it again with all my dads locks on his house. Took like 10 minutes!
Thank you so much sir.
What a strange user manual.
I resolve my problem in like 15 seconds with your video.
Your not kidding I was frustrated I tried a lot of dumb things
3rd doesn’t work for me, could you please suggest what needs to be done?
Thank you!!! I needed to change mine from what my sister had when she lived here and not even the videos from Brinks themselves helped. I followed what you did exactly and it worked.
Thank you for the feedback was afraid I was the only one lol
Thank you for this video! I've had this lock for 10 plus years now and just want to change the code. I couldn't remember anything. Lol thank you again!
OMG THANK YOU THANK YOU!! After 8 other videos I got my code changed ❤
Great video...Very informative with easy step by step instructions😊
Took me multiple attempts but finnaly got it... Thank you!
Omg thank you!! I actually used this for tack life same process, I couldn’t get it done before this amazing video!! Thank you
Thank you means a lot
Hi !!!
I did change all the code .
I only remember the lock code I put ...
What do I do because I don't remember the programming code I put.
Please and thank you!
Just reset it by holding the button on the back inside just rest it
Man, u are the greatest teacher ever, thank you. Very much,
Thank you so much !!!
Thank you!!!!!!!! Best video ever for telling you how to do this!
Means a lot thank you the instructions had me stumped
Thanks. The instruction seemed to be complete, but I couldn't get it going. Your video was just what I needed.
Bb b. Bbb b
I followed Brinks video it didn’t help. After much frustration, found your video. Thanks Tim!!
Glad it helped Don just glad I wasn’t the only one
This is a very well done video - However - I changed my lock on a garage door that was right handed to an exterior door that is left handed. I reset the lock and when I run the left/right hand identification process - I get an error. I did follow the directions by making sure the latch was turned to the right at 45 degrees. But - either way I get 3 red beeps when doing the procedure to identify if it is left handed or right handed. This is obviously an error - How do I resolve???
I have the same issue and can’t get it to push out the lock. Did you find a resolution
Thank you very very much the Company's instructions were unclear but you helped.
Thank you means a lot I have a lot of trouble with the instructions
@@elitesportsmedia You are very much welcome. You earned a sub. Yeah instructions didn't make sense so I did research. And you were the only one that explained very good and step by step and straight to the point. I appreciate your channel. God bless you. ^-^
Mine won't do the left handed right handed step. It'll change the program codes and user codes but then nothing works. I reset and it still won't do step one. Should I take it back apart? I only get three red beeps
You are awesome!! I read the directions, watched the video from the Brinks company and it wasn’t working! Watched your video and it worked like a charm!!!
That’s awesome really glad you got it going this was a little frustrating to me
Ok, but how about if my direction is incorrect (left/right hand door)? When I do the 0000 brinks and 0brinks, my lock doesn’t cycle, I just get a red light. Tried it over 10 times.
If I do it with it “locked”, it cycles but I can’t get it to accept new codes.
Question perhaps u can help…I’m guessing I have a right handed door as the knob is on the right side…originally it was installed on a door with the knob on the left…new door is on the right…so I installed it and the keypad function is like backwards…I have to put in the code then brinks to lock it…which isn’t right you should just hit the brinks button…then when I unlock it the code won’t work but if I just hit the brinks button it unlocks………Do you have any clue what could be causing this?
Yeah I think you have it backwards let me see what I can find
@@elitesportsmedia and I was incorrect it’s a left handed door because the hinges are on the left
Ok you get it working after a ll
@@elitesportsmedia nope not yet haha
@@elitesportsmedia I just use the key for now
Video very easy to follow ,GREAT HELP
Thank you so much Susie!!!
I have a kwikset 264 but it’s named gate house and I reset it but the lock doesn’t come out when I enter the program code 0000 kwikset 0, and it already knows which way it comes out to lock when it didn’t come out when it’s supposed to, is that normal?
THANK YOU X A MILLION. OMG you explain it so much better then actual lady. Idk what she does but yours is different. I think the 1234. I love that you got straight to the dang point. I was able to go right along with you!!!!! And I like that you gave your opinion at the end cause at the beginning it makes people skip Ahead and miss essential info. Your a blessing to the whole world omg thank you
Thank you
Squeeeeeeeze yayeeeeeee
Thank you so much made my day !!!! Thank you !!!!
Hello i have the same lock but suddenly it wouldn’t close, i dont know why, it just makes de error sound when it should close the door
Thank you for taking the time to make this video, the instruction manual, is a little hard to understand.
Thank you very much just glad I was not the only one
But the default user code is still working its not changing
Heard a few say this I’ll reset mine but mine is not doing that
Does 1234 go away mines working with both combos
Yes it should
Hello. I'm not sure whether or not you have figured it out. But you can delete the preset "1234" factory code, or any code you set. I just did it right now and I tried 1234 and it doesn't unlock anymore. Watch this short video
th-cam.com/video/CQtvYl0n11Q/w-d-xo.html
@@HTX-pk6mu gonna try again but it wasn’t working for me
These doorknobs are great when they are working, I got frustrated at first took way to long to get it working right
What if it beeps red a little bit after opening the door
Any tips on connecting this to your alarm
That I have not tried just yet, I’m interested in it however, I got a ring camera and am curious if I would be better off with a ring device but I like the door lock still
Mines doesn't work but thanks , your video helps me a lot, love it.
I bought a large white trunk to store my infant niece’s stuff in th-cam.com/users/postUgkxNuLbiXpLQ-mKH5NlyjrNe88hiCk2N3Cg , as she comes to my house frequently. For now, it’s toys on one side and diapers, wipes, and other baby care items on the other. As she gets older, it will be all toys. I had originally wanted a trunk with a hinged lid, but I was afraid of her smashing or pinching her fingers in it. This will be a much safer option. The lid has great padding in it and it is actually nice to sit on. It feels very sturdy and secure. Looks like it can be wiped clean easily. If it gets abused by her, I won’t be terribly upset because I paid less than $50 for it on Prime Day.
I either have a different model or there’s a difference between these instructions and doing this process for a left swing door. These instructions work up until the 1:35 mark, when I try to enter my pc code it flashes red not yellow.
Yes for a left swing door it’s like a couple steps different
I’ll see if I can find the difference
Did you ever figure it out? I also think mine is a left swinging door and messes up right at the 1:35 mark as well.
8
Adjust The Turnpiece
a. Turn the Turnpiece left (Counterclockwise)
for installation on a right-handed door.
b. Turn the Turnpiece right (Clockwise) for installation on a left-handed
Mine was a left handed door the only difference is right at the behind when turning the inside lock you turn to right it won’t let me share pics
@@elitesportsmedia thank you I got it!
Hi please one advice I am stuck in 0000+4+brinks and nothing happened and I can't move to the second step I did the reset and still the issue, easy working good just we decided change the code and start this problem thank you very much
No problem what step are you stuck at
Is there a possibility the locking bar? Is aligned wrong? I have it up, but I get the programming error 3 red flashes after. Deadbolt isn’t “smooth” but it locks.
Yes it’s possible that usually means programming issue, but you wanna make sure it’s smooth, I wish you could share video in chat or pics. I would try resetting the programming a again and screw the locking bar back in again and just double check position make sure screw are not it too tught
Thank You for posting this!!! Got it reprogrammed thanks to you!!!
Yeah!!! Really glad it worked for you
Thank you so so much! I wasn't able to program the lock following the booklet included, but I did with your video, so good!
Thank you Cecile Quin!!!! Means a lot I was having trouble with it
Thanks.i like that you made it easy to understand. Have a good weekend
Thank you I really appreciate that and you the same !!!!!
I was able to do everything successfully but code 1234 still allows access. Any suggestions? Thank you
Hello ok I did everything and it went well but how about to lock it as you’re going out it won’t lock only to unlock it will work can you please explain it to me thank you
Dope. thanks top notch. Brinks should sponsor this
Agreed.. or you should have them us a QR code link to your video on every box of their's they sell... (.25 Royalty per unit sold. Lol).
Your video was very helpful.. I was set up in the same time it took you to demonstrate the procedure for programming. As for the written instuctions that came with my unit, had me scratching my head like a monkey looking at a math problem for the first time, LOL
is there any way to remove the 1234 ? so you can only have one passcode ??
Yes it is easy to understand this video. But all it does is add a new code. So you end up with two codes. If you lock the door back after your new code is accepted and working if you try the 1234 code it will still work as well.
What happens if you can't even do step 1? What is the difference between a left hand and a right? I think I have a left hand.
Are the hinges installed on your left from where you're standing? That means you have a left-hand door. If the hinges are to your right, then you have a right-hand door.
I have tried to reset this lock several times, but I can’t get it to reset. I press and hold the reset button for 5+ seconds and it still won’t reset. I’ve done this several times now.
That’s really the only way that it states to reset it your lock my just be faulty unfortunately
We've followed every step, but whenever we put in a random code it still opens the door do you know how to fix that?
Reset button is not working? I pressed and held for a while.
Hmmm… that’s a new one for me might double check your batteries
@Tim Wetzel changed the batteries. I finally was able to "reset" the lock once, but it's not the type of reset you're thinking. I held the reset button while I was putting in the batteries, to my surprise it did not beep it just recalibrated and reset the user codes. Now I'm unable to change the user code, because the settings code does not work. Tried everything.
Dang ok let me mess with mine again see if mine does that
Awesome it work for me after I program two different codes thanks for the help
Thanks for feed back glad it worked took me way to long to figure out
I did exactly what you said, and it's work but when I tried the old pc still working with my new one at the same time, how I can delete the old code the 1234
It should automatically override it let me see if we are missing something
@@elitesportsmedia it does not in fact delete the old 1234
It has too I just tried on mine and 1234 does not work
@@elitesportsmedia on mine the old one stayed working but i found a way to delete the old one thanks anyways
How do you delete the 1234 code ?
What could be wrong if you've reset it & did step 1 correctly but it beeps & flash red 3 times??
Somehow it’s not accepting your code your imputing
Thank you! I didn't even see the very first step (reset) in there instruction booklet until after I saw you do it. 😞
Just glad I was not the only one !!!! Hope you got it going thanks Heidi!!!!!
@@elitesportsmedia I certainly did. :)
Mine is opposite. I put in the 1234 and the lock comes out. What do I do to fix it. Pls
Mine doesn’t retract when it’s learning if it’s left or right
daqq this guy explain so easy man. thanks u got ur like from me boy . keep up make easy simple and quick as possible. thanks you
Awesome thank you very much
This video helped me a lot! Thanks for posting this tutorial!
Thank you very much really appreciate it
Thank you as a single women this was an easy set up all the way around. Will recommend .
Thank you so much!!! I had a lot of trouble at first
this is my go to video for reprogramming. thanks!!
Just glad I was not the only one with this problem
When I punch in the code to open the door up the factory code one two three four it unlocks flashes green then red
Thank you so much, great tutorial!
That's good I'm trying to change is 1 2 3 4 but if you could just dial at any time and you come in my door this is not a good lock
I am trying to change code reset it and it still beeps red after I do the 4 0s brinks 0 brinks and no unlocking for me to reset it won't let me use any code to set a new number
Thank you so very much for this. You are the bestest
what if at the initial testing it blinks 3 times red what do I do from there
Try this
Step 1
Your Brinks Digital Deadbolt won’t work electronically if you’ve just installed it for the first time or restored factory settings. You need to perform the Door Handing Detection before it works electronically.
Here’s how to do it: Enter the default Programming Code (0000) and press the BRINKS button. Next, press 0 and then press the BRINKS button again.
Step 2
If you didn’t just install your lock nor restored factory resetting, but it’s not working, chances are the batteries are low or not properly placed. Check that the batteries are correctly placed or replaced with 4 new AA alkaline batteries.
Step 3
Your lock is still not working after the above steps? Remove one battery and then press a few buttons on the keypad to discharge electrical signals. Now put the battery back. This should fix the problem.
But if it doesn’t, then factory resetting is your best bet.
Can you do a tutorial on the touch pad one
Only tutorial that worked!
What if it's a left-handed door
Does it lock automatically?
No you have to push brinks
Great video, easy and quick! Thanks for posting!
Thank you means a lot !!!
Will it automatically lock back once you unlock it or do you have to lock it yourself?
You have to lock it yoursel
Thank you for this video I was trying to follow the video from brinks and they did not go into all the details that you did.
Best step by step instructions 🎉
Thanks just used it took a few tries but it came out good
Great !! Glad it worked thank you
I've done everything u said and programmed my new code, and it works. The problem is the 1234 code still opens the lock as well, how do I stop that code from working
Really it should of over rode it with the code you put in let me see if 1234 works on mine
@@elitesportsmedia ...what's the verdict ? I'm frustrated with this lock, might change to the August lock.
My door would not unlock with 1234
I’m trying to figure out what could of gone wrong
@@elitesportsmedia I've gone through the process 3 different times and every single time the 1234 still opens my door. My new code works, but I can't the default code to go away
I just installed one of these locks and everything works fine except that I always need to wait 2 seconds between key presses. Any idea what's the problem? I also tried resetting the lock but that didnt help either. It's driving me crazy having to wait 8 to 10 seconds to unlock my door every time!
Sounds like you need to take that one back sounds like a motherboard issue
@@elitesportsmedia I was wondering if I overtightened the screws and somehow bent the board. I unscrewed everything and also made sure the wire was snugly connected. It works fine now, thankfully.
I can't unlock my door unless the key is inside deadbolt won't even move manually. Help 😭
🤦♂️ this lock is a pain
It's even better than the official's channel tutorial
Yeah!!!!! Thank you
i just enter pc code but no matter what it is not accepted . please help!
Did you reset it back to factory’?
@@elitesportsmedia yes i did. I slowly follow your steps again and i made it. thank you so much
Awesome this was a pain and I could not figure it out
My bolt Remains half in when I do these steps .anyone suggest to fix it
I use the program code to unlock, but how do I lock using a code?
It works when we use our own code but I also opens when I press 1234. What should I do?
Reset and try again I did this to me at first
Hello. I know it's been 2 months and I'm not sure whether or not you have figured it out. But you can delete the preset "1234" factory code. I just did it right now and I tried 1234 and it doesn't unlock anymore. Watch this short video
th-cam.com/video/CQtvYl0n11Q/w-d-xo.html
You’re the GOAT! Thank you!
What if it’s blinking red after 0000 brinks 0 brinks
Only unlocks. I can’t get it to lock??
It’s not accepting the new code or it’s setup for the wrong side door like left hand side door instead of right hand … let me know and I’ll try to help you
@@elitesportsmedia thanks. I followed your instructions and did the first step. It all works except it won’t lock.
Ok let me see if I can figure out what we are doing wrong and I’ll let you know
How do I get my programming code?
It’s 1234
Oh lala!! you are the best, merçi
Ça fonctionne 👏
Yeah!!!!
Thank you! Very easy to follow and it works well 😊
I have followed your instructions in this video, and it has done everything same as yours. Except when it's all finished and I go to lock my door, it will not unlock with the code....
Omg this was so helpful thank you. I was so confused looking at that paper lol
Thank you so much really glad it helped
How do you set up a second unlock code
I didn’t do that on this model let me check it out
Thanks works great. Simple and you went slow enough I could follow along.
Really appreciate the feedback this took me way to long to figure out haha
My reset only beeps once. I don’t get it. 🤦🏻♂️
I have heard this a lot and to be honest I don’t understand it.
@@elitesportsmedia I ended up getting in touch with customer service. For my reset, I needed to take out the far left battery. Then when reinserting the battery, at the same time hold down the reset. Once this reset worked I could then program new code.
Wow ok awesome information thank you very much