Songs Te used:trancer,night waves,Lost time,and others are in this channels www.channel.com/c/youtube audio library or www.channel.com/c/music lover or audio library
PERFECT !!! :-) This is ideal for oldtimer with cassette radio - music never dies. I think in 10-15 years kids do not know what a "cassette" is. Greetings from germany
That's underestimation. If you show em enough of the last, their curious minds will stretch beyond such wonders. Just as the many young retro game collectors.
Charger module contains TP4056 chip. In this modules it is configured for 1A charging current. It is too much for tiny 150mAh battery. You should replace 1k2 resistor (1A current) to 4k7 resistor =250mA charging current.
The actual cassette adapters have a connecting gear so both spools turn, because some cassette decks, especially the electronically operated ones, have a protection mechanism that keeps them from working if it doesn't detect that the feeding spool is turning, rendering this DIY project incompatible with those decks.
Отлично!)) Как насчёт генерации в кассете зарядного напряжения для аккумулятора за счёт вращения колесиками катушек? --- Great!)) How about the generation in the cassette of the charging voltage for the battery due to the rotation of the wheels of the coils?
Not sure if it's possible, but instead of adding a charge port, you might be able to put a little motor inside the cassette so the deck spins it when you press play. This way it's completely self powered :)
This would be a brilliant idea! I will see if there's a small enough dynamo generator that would work. Edit: really dont think this will work. Tiny dynamos aint a thing
Second wheel should spin with another one because most cassette players will stop automatically because it will think that tape is tangled up. And also that head needs fine tuning if you want to get better quality sound (If your cassette player is stereo then one channel may be louder). But otherwise good job!
there are many types of autostop system in cassette players. In this one there's very simple autostop which works as tape tension in the end of cassette playback pushes a small lever near the main playback head. And as far as there's no tape in this adapter, there's nothing to be pushed for engaging the autostop system in this primitive boombox. That's why autostop doesn't do its job in this video.
Главное где эту плату достать? И где гарнтия, что она работать будет? Была такая готовая кассета. То подключалась, то нет и не нс всех магнитофонах работала плюс жужжание в динамике
@@mellotronz6151 всё на алиэкспрессе. и с какой стати платы не будут работать? какие еще гарантии за эту копеечную стоимость :D если сомневаешься, то покупай эту www.aliexpress.com/item/32968647386.html?spm=2114.13010708.0.0.3a994c4dTuRFTl в наушниках работает без проблем, без дисконнектов
Ура! Нужна была идея внедрения блюпупа в Романтик-306 с сохранением максимальной работоспособности как есть. Вот оно!!! Смотрел на адаптеры за 3к руб., но тут то что надо!
Sometimes, I watch your work and wince at how rough-and-ready it is. But by the end you have created something workable and beautiful (well, reasonably so) at the minimum cost. I doff my hat.
I just made one myself, following this video. I didn't know the magnetic head could be used to emit a signal, apart from reading it from a tape. And it sounds amazing in my Sharp 9494 boombox. I was frustrated when trying to upgrade many sharp boomboxes that does not have line in option. this has just solved my problem, thanks a lot for sharing!!!
>I didn't know the magnetic head could be used to emit a signal How else do you think the tape recording works? It's literally the same head, just with the eraser head (electric magnet in good decks, permanent magnet in crappy ones) sitting before it, which demagnetizes the tape before it puts the new signal in.
Very good sir. Very careful cutting away of certain parts of the cassette shell and overall very clean professional looking finish. Only one issue I can think of with this. Not all cassette players will like this cassette as they expect the other reel to be turning and will stop if this does not happen. I understand the design complications to solve this problem are not simple but what you have done is pretty impressive and it does work!! Well done! :)
How are you avoiding the auto-top mechanism since the second role is not spinning? Many tape players are monitoring the donor wheel to avoid breacking the tape.
Good work. A little note: Some auto reversing mechanisms require both reels to spin or they go into endless reversing loop. So for such mechanisms, you may need to find a way to connect two reels so that they spin together.
Cassette head preamplifier is deemphasizer (NAB, gain rolls off on higher frequency). So this adapter needs preemphasizer to compensate. Good job, dude. Cheers from Indonesia
I did something similar with an 8-Track cartridge a few years ago. The neat thing about 8-track, though, is you don't need batteries to make the Bluetooth module work. In an 8-Track player, there are a set of contacts in the player that are used to 'sense' the metal foil on the tape to cause the mechanism to change programs. You need to step the voltage down for use with most Bluetooth modules, but it works quite well. You also need to adjust the head in the tape cartridge just right, and have the player set for a particular program as well.
@@brapcast I'm sorry, I don't have any photos, and the adapter I built got sold with the console stereo I built it for. Basically, I gutted an old 8-Track head cleaner cartridge, hot-glued a Bluetooth module inside, and wired the output to the tape head from an old busted open-reel deck, similar to the way he does in the video. I used an old open-reel tape head because the audio tracks are wider and it's easier to align with the player's head. My BT module was built for 12V so I didn't need to step down the power, but most modules are for 5V, and to run one of those you'll need a voltage regulator. I improvised a set of contacts inside the tape cartridge to engage the sensor prongs on the 8-Track player and used those to provide the 12V. I strongly suggest you build a bridge rectifier into the circuit if you build one of these, because the polarity of those sensor prongs can vary depending on the player's manufacturer. A bridge rectifier ensures you won't get the wrong polarity at your electronics. The tape head was the hardest part of this - you have to carefully align it with the player's tape head, and that's a lot of trial and error. I built a sliding 'sled' to mount the tape head in with a piece of foam rubber behind it for tension. I 'shimmed' the tape head via trial and error until I got it to work, then epoxied the head in position on the sled. The sled still moves in and out to engage the player head, but it cannot be adjusted vertically. And it's important that you DO NOT CHANGE PROGRAMS while that cartridge is in the player, because that'll cause the tape heads to grind together - NOT GOOD. If I had to do this again, I'd simply build a second set of contacts for audio into the tape deck and put a corresponding set on the cartridge. It means the cartridge can only be used in that particular tape player, though. If done correctly, it shouldn't interfere with regular cartridges. Or, I could simply cheat, and tape into the amplifier's inputs to add a normal Bluetooth module.
where can I get that bluetooth parts ?... battery.. bt module.. Besides in my retro cassette system.. the buttons are digital not mechanical.. So.. when deck detects that theres in not spinning the other gear .. it stop instantly.. so.. how can I apply this metod in my case
If you have this technology being built to be sold at Wal-Mart you will become a millionaires for sure because most old cars still running around with cassette.
Too late. You can buy these things right now for $30-50. And considering you an buy an entire 'mechless' car stereo sporting Bluetooth, SD and USB ports, and a wired 'aux-in' port now for about that same price.....
How is it possible.? You planted the cassette player head into the cassette housing with all other equipment needed.. but the job of the player head is to read magnetic tape, how will it send signal from one head to another..
That cassete player head convert electric pulse into eletromagnet which the head in the radio can read.this tech is already commonly used in 3.5mm aux jack to tape adapter
Why do people keep yelling this is fake?do you never use a 3.5mm jack to cassette tape adapter before?this is the same principle,but with bluetooth module as input.
Awesome idea, even tho it already existed before. But how exactly did you bypass the tape protection mechanism? scince usually the playbackdevice of the cassette should stop when both ends of the cassette arent spinning (atleast in higher end devices like ur Sony CFS-1110S)
Very nicely done. One question though. In some of the cassette players, The playing gets stopped if one of two wheels stops rotating. In video i can see that first wheel is stationary. I think you should keep them both running, may be by connecting them by some means.
I read the comments to see if anyone had pointed this out. In most commercial tape deck adapters, this problem is solved by having the two reels connected by gears.
Про автостоп по обрыву пленки или по остановке подающего подкассетника автор явно не в курсах, как и про юстировку головки по высоте и азимуту. Он, блин еще и включает питание тыкая пальцем по рабочей поверхности головки. И, если автостоп еще можно как то обойти, то крутить головку на аппарате после каждого вставления/вынимания этой приблуды как-то не комильфо... Идея хорошая, но определенно требует доработки.
А где Вы видели автостоп по обрыву пленки? Можно пример? Это может в 001 классах аппаратуры? Так не про них в ролике))) IMHO Вы придираетесь к автору, ну молодец парень придумал хорошую вещь, но она цифрой шуметь будет IMHO опять же....
Unfortunatelly most cassette decks check that both reels are turning to verify the tape is not torn. So you should find a way to connect both reels with a rubber band or similar.
tried it. Because only one reel is spinning, my cassette player shuts down. Only modifying a cassette adapter with both reels geared solved my problem. Be careful ,not all cassette players can take up your version with only one reel spinning. Some will stop other will switch in reverse...
Did you have to add any components to the radio itself after removing that piece or was it the same as if you put in a regular casset?? Also can i emal you? I want to do this with my boombox but i have 2 of those pieces you took out and dont know what to do now...one is a K27J (off to the right) and the other is a K26C (centered where yours was located)
Нечто подобное делал в своё время, вполне хватало проброса пассика меж колесиков тех. Ну и, ежели пошла такая пьянка, тогда уже привод использовать для заряда аккума, небольшой собственной генерации вполне хватит.
Hi, author! Let me give you a price of advice. Connect the rolls inside the cassette with some "belt" to let them rotate together. It will make the cassette look more realistic.
This will not work on all cassette players specially those with logical taype control system. Most highend dedicated cassette players and most car cassette players made after 1997 will not work with this convertor and will reject adapter as soon as inserted. Because two pulleys are free. Needs to add some wheel gears to turn both two pulleys proportionally together, same as when there is a cassette tape in the deck or player. If you look at the commercially made one, you will see gears and capstan rolling rubber wheel ( pinch roller) in the cassette adapter.
U mean head to head audio how it's possible and u didn set the audio pitch and there is no spring that make tension for head to set good pitch I thing it's not possible.....better you just connect direct to audio board .Bluetooth n power it so simple is that
Link to buy materials in video description
Je to náročné!
I love this invent design..
Songs Te used:trancer,night waves,Lost time,and others are in this channels www.channel.com/c/youtube audio library or www.channel.com/c/music lover or audio library
el cabezal para el cassette reciclando, los demás en ebay, mercadolibre, aliexpress
Very good project friend, I have a query, how to enter the audio signal from the Bluetooth module to the sound system, thanks!
PERFECT !!! :-)
This is ideal for oldtimer with cassette radio - music never dies.
I think in 10-15 years kids do not know what a "cassette" is.
Greetings from germany
Not 10-15 years, my children seen cassettes in my cabinet an was very amazed.
That's underestimation. If you show em enough of the last, their curious minds will stretch beyond such wonders. Just as the many young retro game collectors.
Charger module contains TP4056 chip. In this modules it is configured for 1A charging current. It is too much for tiny 150mAh battery. You should replace 1k2 resistor (1A current) to 4k7 resistor =250mA charging current.
ok, thank's bro
The actual cassette adapters have a connecting gear so both spools turn, because some cassette decks, especially the electronically operated ones, have a protection mechanism that keeps them from working if it doesn't detect that the feeding spool is turning, rendering this DIY project incompatible with those decks.
Отлично!)) Как насчёт генерации в кассете зарядного напряжения для аккумулятора за счёт вращения колесиками катушек?
---
Great!)) How about the generation in the cassette of the charging voltage for the battery due to the rotation of the wheels of the coils?
Simply superb. Ideal for all the retro car owners who need to keep the original cassette radio in the car for originality.
Not sure if it's possible, but instead of adding a charge port, you might be able to put a little motor inside the cassette so the deck spins it when you press play. This way it's completely self powered :)
This would be a brilliant idea! I will see if there's a small enough dynamo generator that would work.
Edit: really dont think this will work. Tiny dynamos aint a thing
Second wheel should spin with another one because most cassette players will stop automatically because it will think that tape is tangled up. And also that head needs fine tuning if you want to get better quality sound (If your cassette player is stereo then one channel may be louder). But otherwise good job!
there are many types of autostop system in cassette players. In this one there's very simple autostop which works as tape tension in the end of cassette playback pushes a small lever near the main playback head. And as far as there's no tape in this adapter, there's nothing to be pushed for engaging the autostop system in this primitive boombox. That's why autostop doesn't do its job in this video.
por que hay gente tan negativa o que se hace la graciosa, es algo clásico, que buen video la verdad, excelente trabajo =)
這真是個好點子，謝謝你的創意與無私的教學，讓古董床頭音響也能跟上新時代！....👍
Блю Тузо Садо Мазо .... 😀😀😀 .... в любом магнитофоне есть вход IN для записи ..... не обязательно заставлять две головы спариваться ))
За то прикольно 😉
Главное где эту плату достать? И где гарнтия, что она работать будет? Была такая готовая кассета. То подключалась, то нет и не нс всех магнитофонах работала плюс жужжание в динамике
@@mellotronz6151 всё на алиэкспрессе. и с какой стати платы не будут работать? какие еще гарантии за эту копеечную стоимость :D
если сомневаешься, то покупай эту www.aliexpress.com/item/32968647386.html?spm=2114.13010708.0.0.3a994c4dTuRFTl
в наушниках работает без проблем, без дисконнектов
Creative genius. A true artist.
Осталось сделать, чтоб это всё (с помощью генератора) работало от вращения магнитофоном втулки кассеты
Нормально! Только Синей Изоленты не хватает)
Ура! Нужна была идея внедрения блюпупа в Романтик-306 с сохранением максимальной работоспособности как есть. Вот оно!!! Смотрел на адаптеры за 3к руб., но тут то что надо!
Sometimes, I watch your work and wince at how rough-and-ready it is.
But by the end you have created something workable and beautiful (well, reasonably so) at the minimum cost.
I doff my hat.
Use rotation for charging batterie !
awesome idea!
U mean battery
You'll need an alternator for that
I thought you were gonna use it in your car, but are such equipment easily sold and installed?!
could the movement of the cassette in the player be used to charge the battery??
5v motor capacitor
No, is through the USB cable, like in the video showing, when the led is green then you finished the battery charge
I just made one myself, following this video. I didn't know the magnetic head could be used to emit a signal, apart from reading it from a tape. And it sounds amazing in my Sharp 9494 boombox. I was frustrated when trying to upgrade many sharp boomboxes that does not have line in option. this has just solved my problem, thanks a lot for sharing!!!
Next time install the bluetooth board right inside the boombox - it's fast, much easier & doesn't need to recharge etc.
>I didn't know the magnetic head could be used to emit a signal
How else do you think the tape recording works? It's literally the same head, just with the eraser head (electric magnet in good decks, permanent magnet in crappy ones) sitting before it, which demagnetizes the tape before it puts the new signal in.
बहुत सुन्दर ,मैं बहुत खुश हूँ
ये कमाल का आविष्कार है
From :- india
this invention is awesome
Nice, but would be nicer to have a dynamo to charge the battery with the spinning of the tape
Do you have a pic of
This video DID NOT show me how to make a Bluetooth cassette, it just showed how you made it, but you didn't explain anything
Для старых автомобильных магнитол реальная тема!!!
Talk about bringing back the old stuff with new stuff 🙀Kick ass bro!
Very good sir. Very careful cutting away of certain parts of the cassette shell and overall very clean professional looking finish. Only one issue I can think of with this. Not all cassette players will like this cassette as they expect the other reel to be turning and will stop if this does not happen. I understand the design complications to solve this problem are not simple but what you have done is pretty impressive and it does work!! Well done! :)
Next build should use the spinning part to power the board with a small motor as generator. Not sure if itll hit the voltage needed, but it's an idea.
How are you avoiding the auto-top mechanism since the second role is not spinning? Many tape players are monitoring the donor wheel to avoid breacking the tape.
With a nice gearing and dynamo you can maybe power the whole thing (or load the battery) when the wheels are spinning
Amazing talent ❤️
Good work. A little note: Some auto reversing mechanisms require both reels to spin or they go into endless reversing loop. So for such mechanisms, you may need to find a way to connect two reels so that they spin together.
This is a neat idea.
What is the song at the end?
I'd still rather add bluetooth to my car's 80's OEM tape deck, but this is a seriously dope project
Осталось найти магнитофон😏
You are a genius man!
Cassette head preamplifier is deemphasizer (NAB, gain rolls off on higher frequency). So this adapter needs preemphasizer to compensate.
Good job, dude.
Cheers from Indonesia
Many drawback, like poor quality etc. But good experiment.
по моему было проще аукс сделать..)ну или блютуз модуль напрямую припаять ,дабы качество звука улучшить
WAIT THIS ACTUALLY WORKS???
NO WAY!! :0
Master!!!
I did something similar with an 8-Track cartridge a few years ago. The neat thing about 8-track, though, is you don't need batteries to make the Bluetooth module work. In an 8-Track player, there are a set of contacts in the player that are used to 'sense' the metal foil on the tape to cause the mechanism to change programs. You need to step the voltage down for use with most Bluetooth modules, but it works quite well. You also need to adjust the head in the tape cartridge just right, and have the player set for a particular program as well.
Do you have any reference/photos you could send me? This is exactly what i am trying to do!
@@brapcast I'm sorry, I don't have any photos, and the adapter I built got sold with the console stereo I built it for.
Basically, I gutted an old 8-Track head cleaner cartridge, hot-glued a Bluetooth module inside, and wired the output to the tape head from an old busted open-reel deck, similar to the way he does in the video. I used an old open-reel tape head because the audio tracks are wider and it's easier to align with the player's head.
My BT module was built for 12V so I didn't need to step down the power, but most modules are for 5V, and to run one of those you'll need a voltage regulator.
I improvised a set of contacts inside the tape cartridge to engage the sensor prongs on the 8-Track player and used those to provide the 12V. I strongly suggest you build a bridge rectifier into the circuit if you build one of these, because the polarity of those sensor prongs can vary depending on the player's manufacturer. A bridge rectifier ensures you won't get the wrong polarity at your electronics.
The tape head was the hardest part of this - you have to carefully align it with the player's tape head, and that's a lot of trial and error. I built a sliding 'sled' to mount the tape head in with a piece of foam rubber behind it for tension. I 'shimmed' the tape head via trial and error until I got it to work, then epoxied the head in position on the sled. The sled still moves in and out to engage the player head, but it cannot be adjusted vertically.
And it's important that you DO NOT CHANGE PROGRAMS while that cartridge is in the player, because that'll cause the tape heads to grind together - NOT GOOD.
If I had to do this again, I'd simply build a second set of contacts for audio into the tape deck and put a corresponding set on the cartridge. It means the cartridge can only be used in that particular tape player, though. If done correctly, it shouldn't interfere with regular cartridges.
Or, I could simply cheat, and tape into the amplifier's inputs to add a normal Bluetooth module.
Excellent effort and elaborated very well.... Keep it up.....
Do you think that old tape head can transmit sound to the player tape head???
great ideia my friend
i will use this for my purpose great
It's very nice, but it doesn't work on smarter decks if the second wheel doesn't spin.
Sei un Genio. Complimenti 👍👍👍👍👍
you are a professional 😲
Было бы круто, если кассета сама генерировала ток для подзарядки аккумулятора.
маленький генератор бы на колесо приделать. и можно не заряжать ваще
Правда, классная идея, если столко тока будеть, медлено и слабо крутетса, нада пару звёсдочек и достаточна мощново генератора, уско будеть наверно.
Там на магнитную головку очень слабый сигнал подаётся , на уровне намагниченности магнитной ленты
where can I get that bluetooth parts ?... battery.. bt module.. Besides in my retro cassette system.. the buttons are digital not mechanical.. So.. when deck detects that theres in not spinning the other gear .. it stop instantly.. so.. how can I apply this metod in my case
I enjoy old tech and am glad you do too. You do awesome work. Really a treat to see what projects you come up with and how you restore and modernize.
Great idea! You are really an artist. * Ótima idéia! Tu és realmente um artista. 👀🤩😎⚛🆗✅🏡⚠👍🖖
My car is still using the cassettes lol
If you have this technology being built to be sold at Wal-Mart you will become a millionaires for sure because most old cars still running around with cassette.
Too late. You can buy these things right now for $30-50. And considering you an buy an entire 'mechless' car stereo sporting Bluetooth, SD and USB ports, and a wired 'aux-in' port now for about that same price.....
Идея интересная, но качество звукопередачи будет не очень. Может проще подключить напрямую модуль к магнитофону без магнитных головок?
Такая же мысль возникла.
Very nice brother thanks from Dhule, Maharashtra, India.
Amazing!! Do you buy old cassettes and do you make the Bluetooth cassette adaptor for sale like someone else asked?
The 2000's generation : what is cassette?
How is it possible.? You planted the cassette player head into the cassette housing with all other equipment needed.. but the job of the player head is to read magnetic tape, how will it send signal from one head to another..
That cassete player head convert electric pulse into eletromagnet which the head in the radio can read.this tech is already commonly used in 3.5mm aux jack to tape adapter
Cassette heads were also capable of recording to a tape, so there must be an output mode.
Head player on casette touching head player on the stereo system? I'm confuse to bro how its possible?
Why do people keep yelling this is fake?do you never use a 3.5mm jack to cassette tape adapter before?this is the same principle,but with bluetooth module as input.
Hey
Awesome idea, even tho it already existed before. But how exactly did you bypass the tape protection mechanism? scince usually the playbackdevice of the cassette should stop when both ends of the cassette arent spinning (atleast in higher end devices like ur Sony CFS-1110S)
CARA VOCÊ É UM GÊNIO !!! PARABÉNS ''TE'' !!! VOU COMPRAR UM DESSE !
Porque não adaptou um micro motor pra gerar 5v de energia com um capacitor, usando a própria rotação do radio?
Fue lo mismo que pense
I want to try to use 3D printe to make bluetooth Cassette.Who needs it.😃😃
Why not puting a generator on the wheel to charge the lipo
Good idea
Great Idea
Yes, great idea, but the spin is slow and low power so will need gears and a generator big enough, could be tight, but definitly worth a try 👍
Muy bueno!!!
Gracias ya mismo lo pongo en práctica
Saludos!!!
Very nicely done.
One question though. In some of the cassette players, The playing gets stopped if one of two wheels stops rotating. In video i can see that first wheel is stationary.
I think you should keep them both running, may be by connecting them by some means.
I read the comments to see if anyone had pointed this out. In most commercial tape deck adapters, this problem is solved by having the two reels connected by gears.
на современных магнитолах это не прокатит, должны крутиться оба колесика , а не то магнитола будет попросту выплевывать кассету
How to Make A Bluetooth Cassette Adapter: Log onto Amazon - Place order - Wait 2 days - Done!
RAD Haha! You have a very “fat” brain.🤣
Про автостоп по обрыву пленки или по остановке подающего подкассетника автор явно не в курсах, как и про юстировку головки по высоте и азимуту. Он, блин еще и включает питание тыкая пальцем по рабочей поверхности головки. И, если автостоп еще можно как то обойти, то крутить головку на аппарате после каждого вставления/вынимания этой приблуды как-то не комильфо... Идея хорошая, но определенно требует доработки.
А где Вы видели автостоп по обрыву пленки? Можно пример? Это может в 001 классах аппаратуры? Так не про них в ролике))) IMHO Вы придираетесь к автору, ну молодец парень придумал хорошую вещь, но она цифрой шуметь будет IMHO опять же....
That is really crazy and awesome, I don't care if it's pointless I still think its awesome.
If only this existed while cassettes were at their peak, this would've been so genius. It still is awesome if someone owns a cassette player.
Te vivo en Chimbote Perú estoy interesado en comprar un cassette con Bluetooth me puedes vender y a como gracias
Unfortunatelly most cassette decks check that both reels are turning to verify the tape is not torn. So you should find a way to connect both reels with a rubber band or similar.
You should just press the pause button on tape deck to disable autostop :)
a simple rubber belt round both pulleys would fix that issue...
no can do... because BT receiver is located between hubs (pulleys)
Роль магнитной ленты выполняет головка съёма аналоговой информации с магнитной ленты , ничего магического тут нет
Genial. Buen vídeo amigo.
Wow!! it's play in good quality! I'm surprised!! 😳😱😱
Ficaria completo se o outro rolo rodasse também.
tried it. Because only one reel is spinning, my cassette player shuts down. Only modifying a cassette adapter with both reels geared solved my problem. Be careful ,not all cassette players can take up your version with only one reel spinning. Some will stop other will switch in reverse...
Correctly
надо было для полноты иллюзии еще привод на второе колесо сделать
Тут дело даже не в этом. В более менее взрослых ЛПМ срабатывает защита при блокировки ведомой бобинки
Да
👍🏻😃👌🏻 magnífico mis respetos para usted 🤗
Did you have to add any components to the radio itself after removing that piece or was it the same as if you put in a regular casset?? Also can i emal you? I want to do this with my boombox but i have 2 of those pieces you took out and dont know what to do now...one is a K27J (off to the right) and the other is a K26C (centered where yours was located)
This is not good for me.
If both spindles do not rotate, my player turns off automatically.
Круто надо себе такую забацать
Надо ставить шестерни, чтобы вращались оба колёсика, дабы обмануть функции автостоп и реверс. Даннаый девайс только на китайский плейер
Антон Баяр абсолютно согласен. Только хотел написать, что как раз это автор и не учел.
Нечто подобное делал в своё время, вполне хватало проброса пассика меж колесиков тех. Ну и, ежели пошла такая пьянка, тогда уже привод использовать для заряда аккума, небольшой собственной генерации вполне хватит.
Wonderful👏👏👏💚
Hi, author! Let me give you a price of advice. Connect the rolls inside the cassette with some "belt" to let them rotate together. It will make the cassette look more realistic.
Without detailed instructions or some narration this video is not all that helpful.
This will not work on all cassette players specially those with logical taype control system. Most highend dedicated cassette players and most car cassette players made after 1997 will not work with this convertor and will reject adapter as soon as inserted. Because two pulleys are free. Needs to add some wheel gears to turn both two pulleys proportionally together, same as when there is a cassette tape in the deck or player. If you look at the commercially made one, you will see gears and capstan rolling rubber wheel ( pinch roller) in the cassette adapter.
U mean head to head audio how it's possible and u didn set the audio pitch and there is no spring that make tension for head to set good pitch I thing it's not possible.....better you just connect direct to audio board .Bluetooth n power it so simple is that
best video of 2020 !!!!! #congrats 👍👏🎉🤗
It's great video
Please diagram for conection
now can you make one that works with CD players?
why whit aux bluetooth adapter connection
How should you do that? Watch technology connections video about cd!!
I’m pretty sure this is not possible with CD. But not gonna say no for sure since I don’t know.
No need for cassette you can do it easier without it
Thats ingenious dude.
Buenísimo!!!! Bravo!!! Great Job man!!!
use AUX in :)
this is true yes. not fake
А шланг от телефона не подсоединить в aux?))))))
You're a genius!