Very helpful for me as well. I have an 07 e90. I jacked the rear diff and got it on stands, got away with not having to jack the control arms when tightening the new mounts though which was nice. Great video.
the top of my shocks do not stop where they should but continue to rise upwards. What can be the cause? I didn't put new supports but I will use the old ones.🙏🏽
So if I do the bottom mount at 28lb torque. I won’t need to worry about tightening the Nut at “ride height??? Also how much do you jack the control arm to bolt the upper mount in? Will it eventually “bottom” out?
hi sir... why my 320d e90 m-sport doesn't have bump stops(seems like my metal cap attached on black plastic cover not on bump stop)) or metal cap on plastic cover suppose to remove first or my Bump stop entered into plastic cover, when i DIY to remove my rear absorber..is m-sport version doesn't have it?
As much as i tried not to the shock mount to the arm has cross threaded/spinning free, i think theres a 17 mm nut in top but i cant get a nut or anything on top the u scree from the bottom. Any tips?
You're welcome. I do have some other tutorials on this car, but nothing for the front struts. So far they're still good, so I won't be replacing them anytime soon.
Hey man, I have an 06’ 325xi, I’ve seen videos saying you can’t remove the lower shock mount with the rear shock, but you clearly did it lol, and even installed it with it. is it different on certain years or do people just not tend to use “easy” ways
Did you take the shock out with bottom mount attached by undoing the 2 torx nuts? My 17mm bottom shock nut is rounded and didn't think it would come out by undoing the two bolts instead.
First time I saw a video on replacing the lower bush mounts as well. Also explained the torque setting. Very good.
Amazon Tool Recommendations: amzn.to/3QrjM8c
Current retailers partnered with me & coupon codes:
eManualOnline website: shrsl.com/3vcz4
Coupon Code: 4DIYERS20 (20% off any order)
ECS Tuning Website: bit.ly/46tMpXP
Auxbeam website: auxbeam.com/?ref=4DIYERS
Coupon code: 4DIYERMR10 (10% off any order)
Teslong website: teslong.com
Coupon code: 4DIYERS (10% off any order)
Lanmodo website: shrsl.com/3vczf
Coupon code: LMD4DIYERS (Save $50 off order)
Auxito website: www.auxito.com/?ref=xR3VZnDW
Coupon code: 4DIYERS (15% off any order)
Headlight Revolution website: www.headlightrevolution.com
Coupon code: 4DIYERS (Free shipping on all US orders)
Thanks for probably the best instructions i can find on youtube about the rear suspension assembly. cheers.
Happy I was able to help and thank you for the kind words.
First video that actually explains the upper mount properly, thank you 🙌🏽
Happy to help!
Excellent video, I just did mines today and this is the best video out there, thanks!
Awesome! Thank you!
Very helpful for me as well. I have an 07 e90. I jacked the rear diff and got it on stands, got away with not having to jack the control arms when tightening the new mounts though which was nice. Great video.
Thank you so much and happy to hear you got it done. Hope you have a great weekend!
Great video, many thanks! Could you please do a tutorial fro removinf the rear fenders on the E90 sedan?
GREAT video with all the info one could possibly need. Now to go work on my car :)
the top of my shocks do not stop where they should but continue to rise upwards. What can be the cause? I didn't put new supports but I will use the old ones.🙏🏽
Great video. Thank you. Looks like an relatively easy job.
Thank you and it's not too bad as long as you don't have excessive rust.
So if I do the bottom mount at 28lb torque. I won’t need to worry about tightening the Nut at “ride height???
Also how much do you jack the control arm to bolt the upper mount in? Will it eventually “bottom” out?
How did you torque the top strut nut without holding the strut shaft still?
hi sir... why my 320d e90 m-sport doesn't have bump stops(seems like my metal cap attached on black plastic cover not on bump stop)) or metal cap on plastic cover suppose to remove first or my Bump stop entered into plastic cover, when i DIY to remove my rear absorber..is m-sport version doesn't have it?
As much as i tried not to the shock mount to the arm has cross threaded/spinning free, i think theres a 17 mm nut in top but i cant get a nut or anything on top the u scree from the bottom. Any tips?
Thanks for the detailed tutorial, will you be doing the front axel too? Thanks to ur video im going to try it myself
You're welcome. I do have some other tutorials on this car, but nothing for the front struts. So far they're still good, so I won't be replacing them anytime soon.
Is it possible to adapt the rear shock absorbers from the bmw e46 to the e90?
Hi there I went through a pothole last week and I can hear it banging in the boot
Don’t think it came off
Thanks
Sounds like something broke in the back, you'll have to get under the car to inspect the components.
Hey man, I have an 06’ 325xi, I’ve seen videos saying you can’t remove the lower shock mount with the rear shock, but you clearly did it lol, and even installed it with it. is it different on certain years or do people just not tend to use “easy” ways
btw thank you so much for a detailed video, makes it so much better to understand and know what to expect for the job
i dont have the spot on the shock where you can hold it with a spanner while your tightening the bottom mount bolt?
Should be able to hold it by hand. If not, then use a rubber strap wrench around the shock body.
Did you take the shock out with bottom mount attached by undoing the 2 torx nuts? My 17mm bottom shock nut is rounded and didn't think it would come out by undoing the two bolts instead.
Yes I did. It's a bit tricky getting that mount out, but possible.
Nice one! This worked and saved me cutting the bottom of the shock absorber! Thanks heaps
Great! Happy I was able to help.