Can’t wait to add one to mine. Hoping it comes in under what the two brothers costs. Btw, this being made state side? That’d be a huge selling point to me
@@GaitesKlein there will be black and chrome have to figure out what percentage. I have put my side covers on first prototype with slight modification. They are going to tighten it up so it will look good showing.
It needs no plug and play. The speed limiter I'm not sure. I've heard from some people that they can't go over 110. When I did the gas analysts on the dyno it shows on the video he took it up to 115 and I have had it up to 120 on the road. I will say when you put it on the dyno, the computer freaks, lights flash, you can't turn it off, etcetera. Maybe that got rid of mine I don't know.
@e.g.g.exhaust9094 so you've had yours at 120 mph on the road? What year again was yours and how many miles were on it when you went 120? Maybe guys complaining about a speed limiter we're doing it when machine wasn't broke in and has some kind of limits for the first few hundred miles.
It is a 19 that has almost 70000 now. I'm not sure when I ride a lot. Since the manufacturer has that bike I got a 2023 and the other day I took it up to 115.
The specs I’ve seen for my ‘21 Wing list it at 125hp from the factory. Did you dyno before you built your exhaust? I admire your dedication to the craft!
@@e.g.g.exhaust9094 Ah! Okay. I hadn’t seen the distinction between engine and RWHP. Thanks! Edit: I see you found a manufacturer! Any idea when they’ll have production run systems available?
@@BrandonWest87 not sure they are finishing up a top secret exhaust system for a top auto manufacturer I hope end of October, maybe November. The guy I deal with said the guys are excited about the project so I hope soon I'm without a bike and it snows there after November.
Was supposed to have all the robotics set up last weak. Should be running the first 100 off. Then powder coating and chromed needs to be done. Very soon
Yes, I believe we have all things worked out. They have had my bike so long I went out and got another one. So the wife and I are heading out for a couple week cruise they will probably call me to come hear it while we are out. If it's good, production will begin. It's been a little wait, but it's finally
Should know about price when I get up there. As soon as get back I'll be getting a website. I will try to get as much video as I can to document the trip for my utube channel as well. Thanks for your interest.
waste of $$$... dct goldwing will smoke any harley off the line and through the 1/4 mile. spending $2500 on a rattely exhaust and dyno tune with a new goldwing contradicts why you bought a wing in the first place. you want noise...buy a harley. I've got both...dct wing and an ultra limited (w/an S&S 131 build
I'll get a set whenever I can buy a Goldwing.
Congratulations 🎊
Keep us posted, very interested.
I’ll be ready
Wow fantastic
Great video please let me know when I can place an order.
Can’t wait to add one to mine. Hoping it comes in under what the two brothers costs. Btw, this being made state side? That’d be a huge selling point to me
Absolutely being made in USA. Unlike two brothers which is a slip on this is a full system from head to tail pipe.
@@e.g.g.exhaust9094 think I could get it all in chrome? Or if there’s a way to reuse the stock covers? Also, can this come without the cat?
@@GaitesKlein there will be black and chrome have to figure out what percentage. I have put my side covers on first prototype with slight modification. They are going to tighten it up so it will look good showing.
Cant wait
like the backrest for the driver, who makes that?
It's the honda back rest
So then is there tuning available that will adjust the timing and such and maybe take off a speed limiter and whatnot?
It needs no
plug and play. The speed limiter I'm not sure. I've heard from some people that they can't go over 110. When I did the gas analysts on the
dyno it shows on the video he took it up to 115 and I have had it up to 120 on the road. I will say when you put it on the dyno, the computer freaks, lights flash, you can't turn it off, etcetera. Maybe that got rid of mine I don't know.
@e.g.g.exhaust9094 so you've had yours at 120 mph on the road? What year again was yours and how many miles were on it when you went 120? Maybe guys complaining about a speed limiter we're doing it when machine wasn't broke in and has some kind of limits for the first few hundred miles.
It is a 19 that has almost 70000 now.
I'm not sure when I ride a lot.
Since the manufacturer has that bike I got a 2023 and the other day I took it up to 115.
The specs I’ve seen for my ‘21 Wing list it at 125hp from the factory. Did you dyno before you built your exhaust? I admire your dedication to the craft!
The motor is 125hp it is 98hp at the rear wheel according to Honda specs and 109pf of torque at the rear wheel
@@e.g.g.exhaust9094 Ah! Okay. I hadn’t seen the distinction between engine and RWHP. Thanks! Edit: I see you found a manufacturer! Any idea when they’ll have production run systems available?
@@BrandonWest87 not sure they are finishing up a top secret exhaust system for a top auto manufacturer I hope end of October, maybe November. The guy I deal with said the guys are excited about the project so I hope soon I'm without a bike and it snows there after November.
@E.G.G. Exhaust Rock on 🤘! I’ll keep my eyes peeled for updates! Again, thanks for your dedication to the Wing community sir!
Will you be shipping to the UK?
I haven't given that any thought yet but I would be very open to doing that.
👏👏👏
Any further updates on what is happening with the exhausts
Was supposed to have all the robotics set up last weak. Should be running the first 100 off. Then powder coating and chromed needs to be done. Very soon
@@e.g.g.exhaust9094 good news have you had selling prices worked out yet
Do you have any updates for us on production
Yes, I believe we have all things worked out. They have had my bike so long I went out and got another one. So the wife and I are heading out for a couple week cruise they will probably call me to come hear it while we are out. If it's good, production will begin. It's been a little wait, but it's finally
Mickey Rooney has a Goldwing! Just joking!
What type of exhaust is that for the Goldwing
It is a full exhaust from head to tail pipe. They are being built now should get the first 100 sets in march.
What is current status (1/7/2023)?
Should be calling me any day now to go up and ok it. Very soon
Where is your web site... how do i order. Thank you :)
Going up next Friday to manufacturer to ok. If good they will start production. Should be just a couple of weeks.
@@e.g.g.exhaust9094 sounds great and thank you for the quick response. price point yet?
Should know about price when I get up there. As soon as get back I'll be getting a website. I will try to get as much video as I can to document the trip for my utube channel as well.
Thanks for your interest.
@@e.g.g.exhaust9094 appreciate you. thank you
Any Updates? I’m about to loose hope!!!
I love my Goldwings Factory sound. Not sure why do we want to modify that ? if thats the case Honda would have start selling the OEM parts too
Cause it's not ur money 😤.
wellllll ???? Still waiting for any sort of scrap of an update.
Waiting to be called up any day now to go up and ok the system they started the build about 10 days ago. It's happening. Thanks for your interest
@@e.g.g.exhaust9094 Roger that!
The Gl1800 gold wing already runs like a scalded dog. It’s a Lear jet…. Why make it sound like a bush plane Harley? This video leaves me twisted!
It won’t. It’ll sound like a Porsche. It’s the same engine design.
9
waste of $$$... dct goldwing will smoke any harley off the line and through the 1/4 mile. spending $2500 on a rattely exhaust and dyno tune with a new goldwing contradicts why you bought a wing in the first place. you want noise...buy a harley. I've got both...dct wing and an ultra limited (w/an S&S 131 build
Good for you
I can’t believe that’s all the hp out of a six cylinder, that’s weak, sorry.
Go buy a BMW 1600 GT or Ducati Multi Strada V4S and sell the Honda