How to Replace Valve Cover 2007-2012 Nissan Versa

Buy Now!
New Valve Cover from 1AAuto.com 1aau.to/ia/1AEV...
This video shows you how to install a new valve cover from TRQ on your 2007-2012 Nissan Versa. Under the valve cover, you have camshafts and the valvetrain spinning and flinging oil everywhere.
This process should be similar on the following vehicles:
2007 Nissan Versa
2008 Nissan Versa
2009 Nissan Versa
2010 Nissan Versa
2011 Nissan Versa
2012 Nissan Versa
Tools you will need:
• Pry Bar 1aau.to/oWF/1AX...
• 10mm Wrench 1aau.to/oYP/1AX...
• 10mm Socket 1aau.to/obhy/1A...
• 12mm Socket 1aau.to/obCm/1A...
• 8mm Socket 1aau.to/obhy/1A...
• Air Blow Gun
• Trim Tool Set 1aau.to/oaga/1A...
• Hose Clamp Pliers 1aau.to/ogb/1AX...
• Locking Pliers 1aau.to/omn/1AX...
• Needle nose pliers 1aau.to/oEP/1AX...
• Needle nose pliers 1aau.to/oEP/1AX...
• Pliers
• Ratchet 1aau.to/obGP/1A...
• Socket Extensions 1aau.to/obCm/1A...
• Torque Wrench 1aau.to/oaKP/1A...
• Block of Wood
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oEu/1AX...
• Gloves 1aau.to/oai2/1A...
• Marker / Writing Utensil
• Paper Towels 1aau.to/oEu/1AX...
• Rust Penetrant
• Safety Glasses 1aau.to/oabT/1A...
• Sandpaper
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@AnythingAuto]

You don't have to drain fuel

[@SibRevs]

For those that are curious, this repair procedure is very similar to the 09-14 Nissan Cube with the 1.8L engine.

[@choncoconcos5912]

Would the same torque apply for a 2020 Nissan versa?

[@damianmckeever6890]

Does rtv have to be used on the valve cover gasket?

[@willygasa]

Thanks.

[@godric908]

Always use original as others last 5 months. Random loss of power, when you pull over and try to start it won't until 10 mins later. Oil leak causing misfires on one or more injector port. Personal experience.

[@Yanbrymenocu]

Where is valve guides and seals located?

[@MrShockman10]

0First you di not have to remove the
throttle body coolant hoses to remove throttle body. When taking off the valve cover there also is a removing procedure to. This Nissan motor has not been taking care of. And why was the valve cover replace to begin with?? Clean out the carbon inside the intake manifold. Check your mileage and change your spark plugs. Clean your throttle body I always use OEM parts. Check mileage to determine if you need to change the PCV

[@howlingmedia4354]

17 seems to be to much?

[@lou_Alvarado]

👍

[@shreksta303]

First