Casper! Thanks so much! I've just found the crucifix my Mum gave me two years ago! Plus a plectrum( I'm a guitarist) and two lucky pounds. Hair clips galore! I called the shop I bought the machine from, they just told me to turn the drain plug ha ha they must be kidding. My wife and I had such a laugh doing this at 9am on a Saturday morning. Seriously though, it really makes the point of checking every pocket in every piece of clothing before you wash. Rock on man. Thanks again.
You saved me. I needed a pair of parrot beak pliers (we call them “pinces bec de perroquet” in French), and found a - wait for it - pair of my seamless Uniqlo panties. I wondered why I seemed short a pair. 🤪
God bless you, man! I just started disassembling the washing machine and then decided to look for a video before continuing. Thanks a lot! You saved me couple of hours work and it was Sunday evening - couple of minutes past 9 PM already.
Hi Casper, thanks for this video. Unfortunately my iQ500 has a bottom plate and I have no idea how to reach the filter pump. The only was is trough the back panel, but then I can hardly reach the tube and pump. It was a painstaking job, but I managed to refit the clamp to the tube, as there is hardly any room to use your tools. But, jobs done. So thanks again for this video
Thank you so much sir I just fix my washing machine after watched your videos very helpful God bless you I was very worried about my washing machine 🤲🤲🤲
I put my machine on its side and the drain filter opened. It took awhile longer to disconnect the black hose and find out what was blocking the filter drain. It turned out to be 2 pieces of change of different sizes and one very tiny nail. There's no need to complely disassemble. Thanks for making this easy.
Thanks Casper....I removed a quality mouth/nose mask I used during the pandemic. I had wondered where it had gotten to! Now w.m. draining as it should. Thanks again.
Thank you sooooo much!!! It was a pain to do all the steps you're showing as its not so easy to get with the hands into the machine but it worked very well! There were serveral things stuck in there. Great that you shared this Video with great explanation. Again thank you!
Thanks for this video as all others didn’t mention the filter cover being stuck and not coming off. In my case we managed to unscrew it open with patience, a sleeve of metal over the plastic and pliers. Hairpins and a mass of lint was caught behind blocking the door mechanism.
Thank you for this. Previous 2 Siemens washers had a full width panel alongside the pump access which clipped off to allow access to the pump pipework. Why on earth have they changed the design.
This was the only solution that worked. Mine was full of hairclips and poneytail elastics for my daughters. Getting the hose reattached was definitely a challenge and required two hands. I recommend putting a block under the unit for safety incase it falls.
On the Siemens iq700 the top end machine under the washer is not hollow it's metal so you have to take the door off Because solid machines thats why they don't move around iq500 are there basic machines?
@@qwwwizx I’m afraid that’s wrong. There is a cover underneath the machine meaning I have to remove before I can access. If only it was as easy as just tipping it!
@@qwwwizx yep. Two screws at the back to take the top off. Pull out the detergent tray. 3 more screws there to remove the info panel. Remove the spring on the rubber seal and turn the seal inside the drum. Tilt the machine and remove two screws from underneath. Remove two screw from the behind the access panel to the pump. Then another two screws from the front. Then finally you have to release the door lock mechanism to release the front from the machine. Then you have access to the jubilee clip to clear the pump. And then put it all back on again. Absolute f**king joke. I thought Germans were good at design? Just need an access door from the side panel surely.
Good advice. But i ended up having to use brute force and wd40 on quite flimsy looking plastic and somehow didnt break it. Looking at what had built up behind it, this was the only solution that would have worked. Best of luck to whoever else has to resort to this.
Where is the base plate on your model? When I turn my washing machine upside down I’ve got a base plate. That’s an absolute pig to remove with electric hanging off it and I’ve taken all the screws off all the electrics and it still doesn’t wanna shift?
There are no base plate on my machine and many other types of this machine. If you have one of those with base plate, your machine is unfortunaltely not compatible with this fix.
@@qwwwizx thanks for the reply. Got to it the end, had to take the top off, control panel and the the front panel/door - easy enough and saved a few quid in the process 😉
Good video - to show the principle, but several of those things would not be in the filter - the paper would be mush and the dental thing is too big to escape from the drum and find its way to the filter
This worked amazing for me!! Thank you. Found coins, hair clips and pieces of wood!
Casper! Thanks so much! I've just found the crucifix my Mum gave me two years ago! Plus a plectrum( I'm a guitarist) and two lucky pounds. Hair clips galore! I called the shop I bought the machine from, they just told me to turn the drain plug ha ha they must be kidding. My wife and I had such a laugh doing this at 9am on a Saturday morning. Seriously though, it really makes the point of checking every pocket in every piece of clothing before you wash. Rock on man. Thanks again.
Thanks👍 3 screws, a nail and a lollypop stick.
You saved me. I needed a pair of parrot beak pliers (we call them “pinces bec de perroquet” in French), and found a - wait for it - pair of my seamless Uniqlo panties. I wondered why I seemed short a pair. 🤪
God bless you, man! I just started disassembling the washing machine and then decided to look for a video before continuing. Thanks a lot! You saved me couple of hours work and it was Sunday evening - couple of minutes past 9 PM already.
Thanks so much! It was not so easy to do, but it worked! You saved me from having to call a repairman.
Same!!
I just found my lost house key thanks to you 😂.
Incredible that Siemens doesn't create its own videos on this topic.
you saved me lots of headache my friend! Many thanks 🙏👌❤️
Hi Casper, thanks for this video. Unfortunately my iQ500 has a bottom plate and I have no idea how to reach the filter pump. The only was is trough the back panel, but then I can hardly reach the tube and pump.
It was a painstaking job, but I managed to refit the clamp to the tube, as there is hardly any room to use your tools. But, jobs done. So thanks again for this video
Thank you so much sir I just fix my washing machine after watched your videos very helpful God bless you I was very worried about my washing machine 🤲🤲🤲
Hi Casper! This was the only solution that worked! Thanks a million! Had hair pins, plastic tooth picks and a coin stuck in our filter.
I put my machine on its side and the drain filter opened. It took awhile longer to disconnect the black hose and find out what was blocking the filter drain. It turned out to be 2 pieces of change of different sizes and one very tiny nail. There's no need to complely disassemble. Thanks for making this easy.
Thanks very much for the upload all the others showed how to clean the filter which are no good compared to yours Thanks again
Thanks so much. Fixed our machine thanks to your video. Much appreciated 😊
Glad it helped you out
Thanks Casper....I removed a quality mouth/nose mask I used during the pandemic. I had wondered where it had gotten to! Now w.m. draining as it should. Thanks again.
Thank you sooooo much!!! It was a pain to do all the steps you're showing as its not so easy to get with the hands into the machine but it worked very well! There were serveral things stuck in there.
Great that you shared this Video with great explanation.
Again thank you!
Thanks 👍👍problem solved. I removed the entire black rubber tube. Cleaned it up and replaced it.
Thank you for this video. You saved me money. A box of matches was washed in my filter 😀
Glad to hear it worked out then 👍
Thanks for this video as all others didn’t mention the filter cover being stuck and not coming off. In my case we managed to unscrew it open with patience, a sleeve of metal over the plastic and pliers. Hairpins and a mass of lint was caught behind blocking the door mechanism.
Mange tak, du har sparet mig for en masse bøvl 👍👍
You sir have just saved me £200 bless you my bro
Thanks, your video was spot on with the issue I was having :).
You are the man. Saved money with my bosch 🍻
I am happy to hear that.
Hi Casper, just wanted to say thank you for your video clip to unblock filter cap. It helped me. Thank you. Connor
Thanks 🙏 it worked! Mine was also blocked with dental stick 😅
Thanks men, you are very kind of sharing this. It was exactly my machine's problem. thanks a lot!!
Exactly, I don´t know why the other tutorials show you how to fully disassemble the machine!
Thank you for this. Previous 2 Siemens washers had a full width panel alongside the pump access which clipped off to allow access to the pump pipework. Why on earth have they changed the design.
Thank you so much dude! You are a life saver!
Thanks for the tip. just saved some money thanks to you :))
This was the only solution that worked. Mine was full of hairclips and poneytail elastics for my daughters. Getting the hose reattached was definitely a challenge and required two hands. I recommend putting a block under the unit for safety incase it falls.
Thank you. Only solution that worked.
Thanks, you made my day! I only wish I consulted youtube earlier 😃
Great video. Solved my problem, many thanks!
Thank you! Very helpfull video👍
Am going to give it a go as it will save me money
Thank you
no problem
Woow this saved my job😊
Thank you so much!
Saved my life!!!
Thank you. Thats a pretty big archievement 🙂
On the Siemens iq700 the top end machine under the washer is not hollow it's metal so you have to take the door off Because solid machines thats why they don't move around iq500 are there basic machines?
You might be right. The thing here, is that many machines from other brands too, are just like the iq500.
@@qwwwizx some of them got cheaper I have the iq700 washing machine and heat pump tumble dryer and dishwasher siemens
Thank you, you save my money
Love you man❤
Worked perfectly, thanks!!
Worked perfectly!
Thanks you saved the day 🎉
Tak for denne❤
Tusind tak for hjælpen!
no problem
How do u open the underneath cover?
If you have an underneath cover, your machine is different and cannot be fixed with this easy fix. 😞
Thanks ❤
How to fix if the screen keep display E21
But how do you get the base off to get to the pump? I have done it before and i think i had to take the full fascia off as well as the top.
You tip it. There is no cover in the buttom, so the trick is to get under it. Then you dont have to take anything off
@@qwwwizx I’m afraid that’s wrong. There is a cover underneath the machine meaning I have to remove before I can access. If only it was as easy as just tipping it!
@@mushroom6565 maybe you washing machine is different than mine then. On my machine it was that easy. Then you might have to take it all apart.
@@qwwwizx yep. Two screws at the back to take the top off. Pull out the detergent tray. 3 more screws there to remove the info panel. Remove the spring on the rubber seal and turn the seal inside the drum. Tilt the machine and remove two screws from underneath. Remove two screw from the behind the access panel to the pump. Then another two screws from the front. Then finally you have to release the door lock mechanism to release the front from the machine. Then you have access to the jubilee clip to clear the pump. And then put it all back on again. Absolute f**king joke. I thought Germans were good at design? Just need an access door from the side panel surely.
@@mushroom6565 If you find a shortcut, make a video so others can benefit
Vielen Dank Herr daddy Caspar Larson
Thanks!!
No problem
Good advice. But i ended up having to use brute force and wd40 on quite flimsy looking plastic and somehow didnt break it.
Looking at what had built up behind it, this was the only solution that would have worked.
Best of luck to whoever else has to resort to this.
did u find ball inside? I have white ball it is normal ?
No. There should not be a white ball.
Where is the base plate on your model? When I turn my washing machine upside down I’ve got a base plate. That’s an absolute pig to remove with electric hanging off it and I’ve taken all the screws off all the electrics and it still doesn’t wanna shift?
There are no base plate on my machine and many other types of this machine. If you have one of those with base plate, your machine is unfortunaltely not compatible with this fix.
@@qwwwizx thanks for the reply. Got to it the end, had to take the top off, control panel and the the front panel/door - easy enough and saved a few quid in the process 😉
@@GD-th3gu Glad you managed. It can be hard to get to the baseplate.
Good video - to show the principle, but several of those things would not be in the filter - the paper would be mush and the dental thing is too big to escape from the drum and find its way to the filter
You are not correct. All the items escaped to the filter. They were pulled out just before the video. It can also be hairclips etc.
Awesome. Mange tak🎉
Thanks bro🎉
THX😉
no problem
Very nice. Hope I dont need to use it :)
Saol bro
bro..i broke the outer cap and the filter is stuck inside... what to do now..🥹🥹
THX! 😊