Thanks, just fixed the same problem using your method. I'm really trying to like this radio, but first I had a problem with the switch that happen to be the ribbon cable that needed to be reseated, than key stuck issue that happens to be the same- ribbon cable in another location. Since 70's I used ton of different radios, Futabas, JRs, FrSkys, but this one so far seems to be the least dependable, yes I'm trying very hard to not to use the right word to describe it. Kind of scary to fly the more expensive craft with it.
Hello everyone, thank you for visiting my channel. I went to a friend's house to update his T16 from Jumper TX to Open TX, however, the transmitter was not working. The roller and buttons on both sides were unresponsive. So I figured out what was wrong, and here it is. Also, after fixing it and loading Open TX, we can finally play Freerider Sim. Hope this is helpful to you and I appreciate your sub...👍🏻🍻👊🏻
Bought a refurbished T16pro from Amazon. Page button was not working, no error message no nothing. Was very skeptical at first to try your method. 10 mins later everything works perfectly again. Thank you so much for this video!
I thought it was ridiculous too, but it fixed it to this day. So glad to see the RadiomasterT16S and T18 coming out with wires and not ribbon cables. Glad it helped you...👍🏻🍻👊🏻
I like the voodoo that you do! My Jumper started doing this after jumping off the desk. The cables looked just fine, but flipping them around worked a charm. Probably just re-seating them would have worked as well, but why mess with success. Thanks!
Excellent! It was a nightmare to figure out back then, wasn't a single video or forum post to help us, hence the emergency in lap demonstration, Haha.. Thank you for your feedback. Enjoy the Breeze...👍🏻🍻👊🏻
Thanks for the info. I started getting the key stuck error on the newer T16 pro which came with open TX. Since only the model button was not functioning, I just reseated the ribbon cable on the left hand side and that resolved the issue.
Yeah, what a weird issue. A friend I race with had the same problem and it fixed his aswell. Thank you for checking out my channel and subscribing..👍🏻🍻👊🏻
Thank you for checking it out and the feed back... I have watched a few videos and read some forums and found Painless 360 did the best job. It is a little tricky, but he makes it easier, I thought. Here's a link to his video - th-cam.com/video/IFFtbKfZlFY/w-d-xo.html If you have issues, I have my email attached to my "about" page on my channel. I really do recommend doing the Open TX switch, so much better...👍🏻🍻👊🏻
Your welcome, Thank you for checking out my channel and subscribing. I wish the T16 had wires instead of ribbon cables, but, the I imagine the cost would be high. Have a great day...👍🏻🍻👊🏻
That's freaking awesome! Man, I hate when I buy something and it won't work. So happy to help you Roderick and thank you for checking out my channel...👍🏻🍻👊🏻
Thank you for checking out my channel and subscribing! Here's something else that may help.. graysonhobby.com/jumper-t16-upgraded-ribbon-cables.html I'm glad to be of assistance. Enjoy the Breeze...👍🏻🍻👊🏻
apologies, TH-cam failed to notify me of your comment - and many others as well.. Jumper came out with a replacement ribbon cable bundle. contact your retailer..
Hey man thanks for replying. But no i dont have a video about it. Its just the screen is blank white when i turn it on. Its brand new out of the box Not sure whats wrong
@@PropsOff Heyy brotha dont mean to bother yah but i took the whole thing apart took all the ribbons off put them back in and put it all back together and still the same thing. It turns on says the welcome to open TX then the screen lights up but its blank. Idk. SMDH lol
That is so funny two months ago I received my radio and I had the same problem me being a curious person I said let me see if I can fix this I've found in my radio when I removed a little ribbons there was a little piece of copper looking like a strand from a wire Crossing two of the connectors can't believe but I got lucky and caught that pulled it out with tweezer and well and behold there was another one on the right side of the radio in the connector but not Crossing I'm taking a guess when they made the ribbon cables it was a piece of copper from when they molded the End or or however they make them great job good video
Mine came in this way fresh out of the box. Locked keys and all. I just don't understand why so many people recommend this radio, it feels cheep, already malfunctioning right out of the box. I'm taking it back. I'd say do not go with this radio. You're a paying customer, you shouldn't have to do this on a brand new, fresh out-of-the-box product.
Thanks, just fixed the same problem using your method. I'm really trying to like this radio, but first I had a problem with the switch that happen to be the ribbon cable that needed to be reseated, than key stuck issue that happens to be the same- ribbon cable in another location. Since 70's I used ton of different radios, Futabas, JRs, FrSkys, but this one so far seems to be the least dependable, yes I'm trying very hard to not to use the right word to describe it. Kind of scary to fly the more expensive craft with it.
Hello everyone, thank you for visiting my channel. I went to a friend's house to update his T16 from Jumper TX to Open TX, however, the transmitter was not working. The roller and buttons on both sides were unresponsive. So I figured out what was wrong, and here it is. Also, after fixing it and loading Open TX, we can finally play Freerider Sim. Hope this is helpful to you and I appreciate your sub...👍🏻🍻👊🏻
Thanks for your solution! For me it also worked. Good video, thanks again!!
Bought a refurbished T16pro from Amazon.
Page button was not working, no error message no nothing.
Was very skeptical at first to try your method.
10 mins later everything works perfectly again.
Thank you so much for this video!
I thought it was ridiculous too, but it fixed it to this day. So glad to see the RadiomasterT16S and T18 coming out with wires and not ribbon cables. Glad it helped you...👍🏻🍻👊🏻
I like the voodoo that you do! My Jumper started doing this after jumping off the desk. The cables looked just fine, but flipping them around worked a charm. Probably just re-seating them would have worked as well, but why mess with success. Thanks!
Thank you for posting this, really appreciated. It solved my issues and saved me a headache.
Excellent! It was a nightmare to figure out back then, wasn't a single video or forum post to help us, hence the emergency in lap demonstration, Haha.. Thank you for your feedback. Enjoy the Breeze...👍🏻🍻👊🏻
Thanks. Hopefully this will help me.
I thought I was going to toss it out👍
Was very frustrating. Enjoy the Breeze...👍🏻🍻👊🏻
Thank you so much! I just stumbled on to this video 10 minutes later I’m back in business!
So glad to help. I appreciate you checking out my channel and subscribing! Best Hobby Ever...👍🏻🍻👊🏻
Thanks for the info. I started getting the key stuck error on the newer T16 pro which came with open TX. Since only the model button was not functioning, I just reseated the ribbon cable on the left hand side and that resolved the issue.
Welcome... Even the newer ones are having the issue, hum... Thanks for the feedback...👍🏻🍻👊🏻
Thank you for making this video you saved me some frustration!
So glad it helped you. Enjoy the Breeze...
Your a savior thanks man!!!
Yeah, what a weird issue. A friend I race with had the same problem and it fixed his aswell. Thank you for checking out my channel and subscribing..👍🏻🍻👊🏻
Bought a brand NEW controller and i still had to do this part of me is mad but this video helped, THANK YOU
Welcome..
Frustrating to have to mess with brand new gear, I know..
Dude, you are a life saver!!! Thank you!!!
thank u for the video if u can do a video on how to download the firmwear that will be good thank u.
Thank you for checking it out and the feed back...
I have watched a few videos and read some forums and found Painless 360 did the best job. It is a little tricky, but he makes it easier, I thought. Here's a link to his video - th-cam.com/video/IFFtbKfZlFY/w-d-xo.html
If you have issues, I have my email attached to my "about" page on my channel. I really do recommend doing the Open TX switch, so much better...👍🏻🍻👊🏻
It helped me a lot. My t16 works again. Thank you.
Your welcome, Thank you for checking out my channel and subscribing. I wish the T16 had wires instead of ribbon cables, but, the I imagine the cost would be high. Have a great day...👍🏻🍻👊🏻
Its really works! thanks!
Your feedback is helpful, thank you...👍🏻👊🏻🍻
Just helped me out, I was 2 seconds from chewing out an eBay seller lol, thank you.
That's freaking awesome! Man, I hate when I buy something and it won't work. So happy to help you Roderick and thank you for checking out my channel...👍🏻🍻👊🏻
THANK YOU DUDE! IT WORKS!!!!! GOD BLESS YOU =))))
I had this problem after 6 month...why ? Have not yet change the ribbons. Anyway, your method works fine thank you, you save my radio.
Thank you for checking out my channel and subscribing!
Here's something else that may help..
graysonhobby.com/jumper-t16-upgraded-ribbon-cables.html
I'm glad to be of assistance. Enjoy the Breeze...👍🏻🍻👊🏻
Also did you end up finding better cables?
apologies, TH-cam failed to notify me of your comment - and many others as well..
Jumper came out with a replacement ribbon cable bundle. contact your retailer..
Thank you!
Thank you for checking out my channel and subscribing! Much appreciated...👍🏻🍻👊🏻
Worked once but key stuck issues again on mine anyone got ahold of jumper about this?
Thanks man!!! Saved my life! and wallet!! lol
Hey everyone I my jumper t16 pro straight out the box. The screen is blank don’t no what to do plz help
Do you have a video of whats going on?
Is it working now?
Hey man thanks for replying. But no i dont have a video about it. Its just the screen is blank white when i turn it on. Its brand new out of the box Not sure whats wrong
Hey brotha yeah i turn the ribbons around but the screen is still blank white idk what to do cant find any videos about it. I guess im fucked lol
@@PropsOff Heyy brotha dont mean to bother yah but i took the whole thing apart took all the ribbons off put them back in and put it all back together and still the same thing. It turns on says the welcome to open TX then the screen lights up but its blank. Idk. SMDH lol
Thank you!!!
Enjoy the Breeze...👍🏻🍻👊🏻
🖐️😎👍🆙
Thanks!
Welcome
thanks
Works like a charm, thanks, you made my day!
That is so funny two months ago I received my radio and I had the same problem me being a curious person I said let me see if I can fix this I've found in my radio when I removed a little ribbons there was a little piece of copper looking like a strand from a wire Crossing two of the connectors can't believe but I got lucky and caught that pulled it out with tweezer and well and behold there was another one on the right side of the radio in the connector but not Crossing I'm taking a guess when they made the ribbon cables it was a piece of copper from when they molded the End or or however they make them great job good video
I appreciate it, thank you. I personally don't care for ribbon cables, but this transmitter uses a ton of them..
I love you
Thanks very much for the info. How the fuk did you work that out?
Mine came in this way fresh out of the box. Locked keys and all. I just don't understand why so many people recommend this radio, it feels cheep, already malfunctioning right out of the box. I'm taking it back. I'd say do not go with this radio. You're a paying customer, you shouldn't have to do this on a brand new, fresh out-of-the-box product.
I agree with you and I own the RadiomasterTX16S.. No ribbon cables!
Thank you!!!
You bet...👍🏻🍻👊🏻