This is how WE do post sleeve installation on tennis post.

this is how we install tennis net post sleeves. there are many ways to do this, some people use the flare out method, some people like us use the elephant foot or bell bottom method. as a guy who revamps courts for a living I've dug up at lot of post to replace them . I've had them with 500 pounds balls on the end of them . it's not how big your ball of concrete is its the shape that's going to hold it in place . We use an auger and we shoot in all different directions so it looks like a bell oran elephant foot. meaning the side opposite the net side you dig out like 12 inches this helps the post not kick in from tensionof cable. the earth above the area is going to act in a way that will push back against the tension....that happens once you get to your desired depth. at the bottom of your hole your going to have a gravel type base something that will drain any water that makes it into the sleeve.

[@ScottT109]

The power augers are awful to deal with when they snag a rock or something big sending the operator into a tailspin 😂

[@jimsherry1198]

In your experience, how large does the cement base need to be in which you are imbedding the post sleeve?

[@thesealerguys]

We try to dig a 2x2 or if possible a 3x3 foot bottom

[@thisismyusername6717]

Awesome. How much does a machine that cut the core out cost usually?

[@thesealerguys]

2 to 2500 with cans

[@arrumahn]

@@thesealerguys what's the name of this type of machine?

[@thesealerguys]

@arrumahn called a core/bore drill will run 4k. You can rent at rental place 500 a day maybe

[@thesealerguys]

That's a 14 inch can. That's about smallest I'd go