Heyy, Do we have to turn ON n OFF relay manually with our phone or it will be done automatically on the basis of moisture sensor and rain sensor status??
Bro the link which u have given for purchasing nodemcu in the discription. Can We buy it? There is no problem right?Is that nodemcu is different from the one ur showing in the vedio? Please tell bro,I had already purchased it.
Bro you have not mentioned the Solenoid water pump connection could you please tell me the connection and after connecting the Solenoid water valve will there be in change in the code pls also mention that it's a request.....
I done this project but rain sensor not detecting(what i mean is sensor is detecting but alert is not getting),pir is sensing even there is no movement please help me I stuck here.
@@njvloogs3814 just remove #include And replace SimpleTimer timer; by BlynkTimer timer; Because blynk library itself has BlynkTimer no need to include SimpleTimer
@@atharvajoshi9099 Iam getting error as BlynkTimer' does not name a type after removing Simpler Timer header file would have any more solution for that code.
@@soujanpoojari1605 thanks bro my error was solved way back ....but thanks for replying and also the project is working absolutely fine your video helped me alot..... Thanks again
@@soujanpoojari1605 yeah actually i too was facing the same issue so I discarded that and instead of that I added switch which was connected to motor, so whenever farmer ON the switch motor will turn on and then water will start flowing vice versa
Arduino: 1.8.13 (Windows 10), Плата:"NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, Legacy (new can return nullptr), All SSL ciphers (most compatible), 4MB (FS:2MB OTA:~1019KB), 2, v2 Lower Memory, Disabled, None, Only Sketch, 115200" In file included from C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/Blynk/BlynkApi.h:17:0, from C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/BlynkApiArduino.h:14, from C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/BlynkSimpleEsp8266.h:24, from C:\Users\Zver\AppData\Local\Temp\Rar$DIa5816.11863\SmartAgricultureMonitoring\SmartAgricultureMonitoring.ino:7: C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/Blynk/BlynkTimer.h:36:21: error: redefinition of 'class BlynkTimer' #define SimpleTimer BlynkTimer ^ C:\Users\Zver\Documents\Arduino\libraries\SimpleTimer/SimpleTimer.h:10:7: note: in expansion of macro 'SimpleTimer' class SimpleTimer { ^ C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/Blynk/BlynkTimer.h:36:21: error: previous definition of 'class BlynkTimer' #define SimpleTimer BlynkTimer ^ C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/Blynk/BlynkTimer.h:41:7: note: in expansion of macro 'SimpleTimer' class SimpleTimer { ^ exit status 1 Ошибка компиляции для платы NodeMCU 1.0 (ESP-12E Module). Этот отчёт будет иметь больше информации с включенной опцией Файл -> Настройки -> "Показать подробный вывод во время компиляции"
In file included from C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/Blynk/BlynkApi.h:17:0, from C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/BlynkApiArduino.h:14, from C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/BlynkSimpleEsp8266.h:24, from C:\Users\Zver\AppData\Local\Temp\Rar$DIa5816.11863\SmartAgricultureMonitoring\SmartAgricultureMonitoring.ino:7: C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/Blynk/BlynkTimer.h:36:21: error: redefinition of 'class BlynkTimer' #define SimpleTimer BlynkTimer ^ C:\Users\Zver\Documents\Arduino\libraries\SimpleTimer/SimpleTimer.h:10:7: note: in expansion of macro 'SimpleTimer' class SimpleTimer { ^ C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/Blynk/BlynkTimer.h:36:21: error: previous definition of 'class BlynkTimer' #define SimpleTimer BlynkTimer ^ C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/Blynk/BlynkTimer.h:41:7: note: in expansion of macro 'SimpleTimer' class SimpleTimer { ^ Используем библиотеку SPI версии 1.0 из папки: C:\Users\Zver\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.7.3\libraries\SPI Используем библиотеку ESP8266WiFi версии 1.0 из папки: C:\Users\Zver\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.7.3\libraries\ESP8266WiFi Используем библиотеку Blynk версии 0.6.1 из папки: C:\Users\Zver\Documents\Arduino\libraries\Blynk Используем библиотеку SimpleTimer версии 1.0.0 из папки: C:\Users\Zver\Documents\Arduino\libraries\SimpleTimer Используем библиотеку DHT-sensor-library версии 1.3.0 из папки: C:\Users\Zver\Documents\Arduino\libraries\DHT-sensor-library Используем библиотеку OneWire версии 2.3.5 из папки: C:\Users\Zver\Documents\Arduino\libraries\OneWire Используем библиотеку DallasTemperature версии 3.8.0 из папки: C:\Users\Zver\Documents\Arduino\libraries\DallasTemperature exit status 1 Ошибка компиляции для платы NodeMCU 1.0 (ESP-12E Module).
Brother you too much... You're the reason why am still rocking embedded system. Thank you for sharing the knowledge
Can you please provide the link to download the libraries of this project as well. It will be a great help. Thank you very much!
Thank you it is working but the relay is on by default, i had to connect to NC and Co. What could have gone wrong in this issue. pls reply
Faced with the same problem.
did you fix it ??
Heyy,
Do we have to turn ON n OFF relay manually with our phone or it will be done automatically on the basis of moisture sensor and rain sensor status??
This is nice but is the esp module reliable? and does it go offline frequently even when wifi is available
I have a question, when I want to load the code, it shows a compilation error to the board?
Same with me
I means something is error in code
Sorry guys What program did you use to creat circuit diagrams? about your Materials
will you please lemme know what software are you using for circuit design
Awesome bro !!.......can u please make a video on automatic and manual modes of operating of any actuator using NODEMCU ... please .......
Which software are you using for circuit diagram drawing brother in this video
It's Tinker Cad software
It's just woww😍
Bro the link which u have given for purchasing nodemcu in the discription. Can We buy it? There is no problem right?Is that nodemcu is different from the one ur showing in the vedio?
Please tell bro,I had already purchased it.
Bro please give reply
i am facing the error of uploading sketch for node mcu.how to fix it .can you please guide
what website do u use to design the circuit?
Bro you. The real one you make lots of cool stuff keep it up
HAI SIR .. TQ FOR NICE PROJECT ..BUT I WANT TO ASK .. CAN WE CHANGE THE ESP8655 TO ESP 32
Very good 👍👍👍
Bro you have not mentioned the Solenoid water pump connection could you please tell me the connection and after connecting the Solenoid water valve will there be in change in the code pls also mention that it's a request.....
Which application you are using to make connections
What is the cost of project for making iot based smart irrigation monitoring system
How to make wafer pump turn on depending on soil moisture and also adda buzzer as output of motion sensor?
Bro this project is only for hard ware right
I want to connect moisture sensor with node mcu wirelessly with wifi???
Could u make basic video regarding the equipments
Can we use for large scale?
Men you are amazing, thanks a lot
is this program code the same for esp32?
Amazing project
Thank you bro
very good project but how can i find my wifi name and password
Sir! I have a problem regarding esp 32 cam whenever i upload the code it says camera probes nkt found or type if this eroor can you plz resole thanks
I'm not able to use this blynk version...how to connect with blynk new version???
Editing ke liye konta software us kar te ho
Bro is there any way to store data from blynk to cloud ?
How much money needs for this hardware requirements?
Nice
i2c display use
we are facing a problem while connecting to blynk we tried and run your and it doesn't connect to mobile hotspot
what software program are you using for assembly simulation !?
fritizing its for making connection not for simulation
Arduino IDE Software For Programming
Please I need help can I use mobile hotspot said and password in the sketch of the ESP8266
can you make another video for BLYNK 2.0
How can we make a blynk app to work with 3g/4g mobile networks
In the code error is coming that Node Mcu board is not found,How to solve !!
It's urgent
Hai sir how to add push button , like can pump the water useing button and blynk system.
Oh btw thx a lot sir 😁
How connect with NPK sensor plz
I done this project but rain sensor not detecting(what i mean is sensor is detecting but alert is not getting),pir is sensing even there is no movement please help me I stuck here.
I'm lots of learn from you thank you bro💝
am facing the error of uploading sketch for node mcu.how to fix it .can you please guide
@@aqibshafiq9797 can you tell me what's the error message?
@@diyrobotronics it is showing me error when flashing in the node MCU exit status error 01 Com3
Thank you!!!
What is the name of the software used?
Error compiling for board NodeMCU 1.0 (ESP-12E Module??
Mesma coisa aqui
Nice
Bro can you plz send the app link if i search for it iam getting different one
Sir code is not working for relay motor pls help me
Sir ji mujhey apney boy ko training dilwani hai kha se training milegi pls bataye
Op bhaii.
Bhai raspberry pi robot banaoo plzz
please make a video where soil moisture sensor detect no water and run pump automatically
Thank you bro for keeping my request
pls make a video on using dht11, rain sensor, soil moisture and esp8266 and nothing else.
pls brother its urgent
I have made with those components too. If you want then I can help you though.
Which software is uses to design the circuit
Fritzing
Can you make this same project on blynk 2.0
Yes
Can you tell me how can we download CP201 driver in Mac book air plz make video
Error in compiling.[Error compiling for board NodeMCU 1.0 (ESP-12E Module).
] How to solve the following error bro
@NAZRAN ZAFRAN BIN JAMALUDDIN Moe have you got the solution for this? i am facing the same error
@@aqibshafiq9797 bro did u get any solution for this
@@njvloogs3814 no
@@njvloogs3814 just remove
#include
And replace SimpleTimer timer;
by
BlynkTimer timer;
Because blynk library itself has BlynkTimer no need to include SimpleTimer
@@atharvajoshi9099 Iam getting error as BlynkTimer' does not name a type
after removing Simpler Timer header file would have any more solution for that code.
Please tell me how to resolve this error
via i can't built arduino program code
. please give this program code.
in which software is he coding?
I am getting node mcu compiling error
when i compile code it gives Error saying "Error compiling for board NodeMCU 1.0 (ESP-12E Module).
" Please help me to fix this issue.
Bro while uploading press and hold the reset button ur error may get resolved
@@soujanpoojari1605 thanks bro my error was solved way back ....but thanks for replying and also the project is working absolutely fine your video helped me alot..... Thanks again
@@paraskushwaha8453 oh great bro, for me every connection is correct but my relay is not turning on how to sort it do u have any ideas??
@@soujanpoojari1605 yeah actually i too was facing the same issue so I discarded that and instead of that I added switch which was connected to motor, so whenever farmer ON the switch motor will turn on and then water will start flowing vice versa
Oh good idea bro thank you ❤️
Why code is not downloading
plz tell me circuit software name
Great bro
Code is not working
Relay always on why😢
Brother where is the motor pump
I get error 'D2 is not declared'
When I compile the code you shared, I get an error.
Can you share the error code with me?
can you please link down all the libraries link?
urgently needed
Ping me! I'll provide your required libraries.
@@sauravkr9391 is this project worked brother? i want to do this as my project
While compiling i am getting exit status 1 for board nodemcu 1.0 .Anyone could help me?
I face same problem😴
PLEASE PROVIDE LIBRARIES
But bro where is the motor pump connected
Can i get the complete source code
Bro pleae suggest me hhow to learn aurdino coding
@@AalonFernz ok thank you
sir i am unable to find nodeMCU option in arduino software
Install esp8266 board in board manager
@@chanukyaGowda Sir i have a Problem with the code can you help me ?
@@nirajdeokar2900 I can help you.
Flowchart pls
I am getting error in compiling the code to nodemcu bro
Mine too
How you solved bro
Bro give program to damp the program
Bro I am getting error in uploading the code in nodemcu
have you got the solution for this? i am facing the same error
@Renz Sinlao its showing problem uploading code for node mcu 1.0
Nice one but can you please send us the full code?
There is a code issue
Yahiooo
Help me in this bro
Hi sir help me
Arduino: 1.8.13 (Windows 10), Плата:"NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, Legacy (new can return nullptr), All SSL ciphers (most compatible), 4MB (FS:2MB OTA:~1019KB), 2, v2 Lower Memory, Disabled, None, Only Sketch, 115200"
In file included from C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/Blynk/BlynkApi.h:17:0,
from C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/BlynkApiArduino.h:14,
from C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/BlynkSimpleEsp8266.h:24,
from C:\Users\Zver\AppData\Local\Temp\Rar$DIa5816.11863\SmartAgricultureMonitoring\SmartAgricultureMonitoring.ino:7:
C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/Blynk/BlynkTimer.h:36:21: error: redefinition of 'class BlynkTimer'
#define SimpleTimer BlynkTimer
^
C:\Users\Zver\Documents\Arduino\libraries\SimpleTimer/SimpleTimer.h:10:7: note: in expansion of macro 'SimpleTimer'
class SimpleTimer {
^
C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/Blynk/BlynkTimer.h:36:21: error: previous definition of 'class BlynkTimer'
#define SimpleTimer BlynkTimer
^
C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/Blynk/BlynkTimer.h:41:7: note: in expansion of macro 'SimpleTimer'
class SimpleTimer {
^
exit status 1
Ошибка компиляции для платы NodeMCU 1.0 (ESP-12E Module).
Этот отчёт будет иметь больше информации с
включенной опцией Файл -> Настройки ->
"Показать подробный вывод во время компиляции"
In file included from C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/Blynk/BlynkApi.h:17:0,
from C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/BlynkApiArduino.h:14,
from C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/BlynkSimpleEsp8266.h:24,
from C:\Users\Zver\AppData\Local\Temp\Rar$DIa5816.11863\SmartAgricultureMonitoring\SmartAgricultureMonitoring.ino:7:
C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/Blynk/BlynkTimer.h:36:21: error: redefinition of 'class BlynkTimer'
#define SimpleTimer BlynkTimer
^
C:\Users\Zver\Documents\Arduino\libraries\SimpleTimer/SimpleTimer.h:10:7: note: in expansion of macro 'SimpleTimer'
class SimpleTimer {
^
C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/Blynk/BlynkTimer.h:36:21: error: previous definition of 'class BlynkTimer'
#define SimpleTimer BlynkTimer
^
C:\Users\Zver\Documents\Arduino\libraries\Blynk\src/Blynk/BlynkTimer.h:41:7: note: in expansion of macro 'SimpleTimer'
class SimpleTimer {
^
Используем библиотеку SPI версии 1.0 из папки: C:\Users\Zver\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.7.3\libraries\SPI
Используем библиотеку ESP8266WiFi версии 1.0 из папки: C:\Users\Zver\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.7.3\libraries\ESP8266WiFi
Используем библиотеку Blynk версии 0.6.1 из папки: C:\Users\Zver\Documents\Arduino\libraries\Blynk
Используем библиотеку SimpleTimer версии 1.0.0 из папки: C:\Users\Zver\Documents\Arduino\libraries\SimpleTimer
Используем библиотеку DHT-sensor-library версии 1.3.0 из папки: C:\Users\Zver\Documents\Arduino\libraries\DHT-sensor-library
Используем библиотеку OneWire версии 2.3.5 из папки: C:\Users\Zver\Documents\Arduino\libraries\OneWire
Используем библиотеку DallasTemperature версии 3.8.0 из папки: C:\Users\Zver\Documents\Arduino\libraries\DallasTemperature
exit status 1
Ошибка компиляции для платы NodeMCU 1.0 (ESP-12E Module).
Mai ne aap ko instagram pr bhi msg ki ya hai
I am the first
Cheating
Bro we need robotics projects
Those moisture sensors corrode over time and are crap
These sensors are just for demonstration or project purpose
U can use capacitive soil moisture senso.