How to Model an Interior Door in SketchUp

แชร์
ฝัง
  • เผยแพร่เมื่อ 12 พ.ย. 2024

ความคิดเห็น • 24

  • @SketchUp
    @SketchUp  2 หลายเดือนก่อน +4

    What do you want us to model next?

    • @sandwiched
      @sandwiched 2 หลายเดือนก่อน +2

      How about a complex organic shape? For example, I'm revisiting an old, low-poly spaceship model I built in Rhino 3D over two decades ago. It's a rather curvy, organic shape-not much in the way of straight edges or flat surfaces (it's supposed to be a Vasudan ship, from the _FreeSpace 1/2_ games). So far, I've just been using the Arc tool to approximate the existing low-poly contours, and I'm hoping I'll be able to (manually) combine them once I'm done, into something resembling the original shape. I'm curious how y'all'd go about tackling something like that.

    • @ahmad-murery
      @ahmad-murery 2 หลายเดือนก่อน +1

      Continue modeling your room.
      Thanks Matt!

    • @enderw88
      @enderw88 2 หลายเดือนก่อน +1

      How about doing a Layout package on a reasonably complex mechanical part, show scen creation and dimensioning

    • @luisfe7187
      @luisfe7187 2 หลายเดือนก่อน

      How can we make a dynamic component installed so that we can only stretch it according to the gap in the wall and maintain its proportions.

    • @rvamerongen
      @rvamerongen 2 หลายเดือนก่อน

      Nice and thank you, What about a sash window, vertically, with rubber seals.

  • @keggyification
    @keggyification 2 หลายเดือนก่อน +2

    that was brilliant Matt. Really clear and concise instruction.

  • @devenshah3061
    @devenshah3061 2 หลายเดือนก่อน +1

    Thanks for simplifying the process of making a 2 panel door using SketchUp

  • @johnjlopez
    @johnjlopez 2 หลายเดือนก่อน

    This is one of those things that are good to model the first time (like learning long division) but then find a dynamic component to use forever forward.

  • @pias6267
    @pias6267 2 หลายเดือนก่อน +1

    Excellent! Very good tutorial. Thanks, Matt

  • @LeeL-l7p
    @LeeL-l7p หลายเดือนก่อน

    Great vid! I like that I learned how to do the door a lot easier than I've been doing. Plus I'm watching it back again to get some of the subtle workflow tips. How would you model a cord on a computer mouse to make it look realistic?

  • @IOSALive
    @IOSALive 2 หลายเดือนก่อน +1

    SketchUp, keep grinding

  • @kpeel1357
    @kpeel1357 2 หลายเดือนก่อน +1

    Thanks for the tutorial that was really great 9x out of 10 I'm making a building that has maybe 50/60 doors in it so I don't want that much geometry I was kind of good with it when you added the image to the square. However your process was very cool thanks for sharing

  • @SamHarrison-r1w
    @SamHarrison-r1w 2 หลายเดือนก่อน

    Can the doorknob be "slendered?" Or would one undo and modify the F-M profile? Concise and informative. Thank you.🙂

  • @paulwassenaar8351
    @paulwassenaar8351 2 หลายเดือนก่อน +1

    add swing plan and swing elevation, preferably with different tags

  • @kpeel1357
    @kpeel1357 2 หลายเดือนก่อน

    How would you model a bathroom with a mirror that has reflections

  • @ks-sm3rb
    @ks-sm3rb 2 หลายเดือนก่อน

    cool

  • @ChelseaPensioner-DJW
    @ChelseaPensioner-DJW 2 หลายเดือนก่อน

    Great tutorial on drawing the door, but it's orientation is wrong. It should be placed in the middle of the door casing, not on one edge.

    • @captainsawdust1
      @captainsawdust1 2 หลายเดือนก่อน

      Single swing doors always have to be flush and hinged with one edge of the jamb depending on the handing (left or right). Casing is the trim around both sides of the door. This is in the uSA.. Do you have different terms where you are?

    • @synchr0nic0
      @synchr0nic0 2 หลายเดือนก่อน

      It's orientation is correct. At the edge.

  • @ladybookworms
    @ladybookworms 2 หลายเดือนก่อน

    SO WHAT IS THE ANSWER TO YOUR VIDEO CALLED "How’s your spatial awareness"?? How do you put the question and forget to post the answer?

  • @PMWorkshop
    @PMWorkshop 2 หลายเดือนก่อน

    to fast