MBK Modelling Basics

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 พ.ย. 2022
  • At the summerfest, colleague Schiller showed how a small terrain slab can be created and greened relatively quickly.
    We recorded the whole thing and made it available here for anyone who wants to watch it again or couldn't be there.
    Have fun and good luck!
    Here again in writing what Christian did and what material was used for this demonstration:
    PROCEDURE
    Planning - Which model - which scene = which size - rule of thumb small and compact
    - Prepare the base - Notch/scratch the wooden base to have better adhesion - e.g. HWHD2513S
    - Cut Styrodur, in our case a small Raise the left side, make sure you have a right angle, sand any unevenness smooth - after gluing
    - Glue on Styrodur with wood glue, leave to dry for at least 6 hours.
    - Mask off the base - the areas that are not to be machined
    - Put on gloves, lay out a newspaper or similar at the workplace
    - Apply Moltofill and model the terrain, when the material dries footprints, chain tracks, press in / adjust the model, natural material such as e.g. Press in / insert stones, roots, etc., if necessary attach with a drill after drying.
    - Allow Moltofill to dry, per 1mm of material = 1 hour drying time - clean tools immediately.
    - Vignette primer = homogeneous, absorbent and grease-free surface
    - Paint the surface - Indentations Darker e.g. XF1, then become lighter, depending on the desired colored background, XF64, XF52 - Mix colors with XF2.
    - If necessary, paint surfaces dry, washing, etc.
    - Cut the grass mats to size, pluck and stick on with wood glue - alternatively apply with UHU all-purpose glue.
    - Bring up bushes and trees
    - If necessary, prepare the base with paint - keyword artificial grass fibre
    Necessary accessories
    - Craft knife
    - Styrodur - important no Styrofoam (there is e.g. in the building materials trade
    - Wood glue e.g. Ponal - NOT waterproof (important - no thinner based glue)
    - Moltofill - wood repair putty 1kg in a cup
    - 1x gloves
    - Masking tape, at least 18mm - e.g. MBK-MT18
    - Emery paper - e.g. MBK file
    - natural material - small tree root, pebbles, earth etc-
    - Primer - e.g. Tamiya 87042 Gray
    - XF1 , XF64 , XF52, if applicable XF2 no thinner-based paints!!
    - If necessary wash Amig1005 etc. if necessary dry paint e.g. Amig0616 etc.
    - Grass mat, flock, grass fibers - e.g. Model Scene MSC-F601
    - Glue on the bushes, here as an example Wel6003
    - Prepare hole for tree with wood drill
    - Airbus + accessories
    - Drill, if necessary, cordless drill + holder - 0.5 -2
    - Wooden base e.g. HWHD2513S

ความคิดเห็น • 22

  • @seegurke93
    @seegurke93 ปีที่แล้ว +4

    Danke Christian! Ich dachte ich wüsste schon viel aber konnte mir doch noch ein paar Sachen abgucken und Tipps die du gesagt hast mitnehmen!

  • @hans-martingrotheer1218
    @hans-martingrotheer1218 ปีที่แล้ว +3

    Jo Moin das war ja mal wieder ein schönes Video wieder ,Das Dioram gefällt mir ser von feinsten 😍👍👍👍👍👍👍👍👍

  • @markusstraetmans7584
    @markusstraetmans7584 ปีที่แล้ว +2

    Hallo Christian, es ist wirklich ein sehr schöner Beitrag von Dir und ich freue mich schon auf neue. Weiter so.

  • @fjdexx
    @fjdexx ปีที่แล้ว +4

    Vielen Dank. Eine tolle Folge. Gerne mehr davon

  • @thetank5704
    @thetank5704 ปีที่แล้ว +2

    Klasse Christian, vielen Dank für das Video (und alle anderen) Gerne mehr davon.
    Es ist mir immer eine ganz besondere Freude deine Video's zu sehen. Du bist eine Bereicherung für das Hobby Modellbau und meine Motivation. So nun gehe ich und gründe einen Fanclub :-)
    Nein im Ernst.. Du machst das so toll. Schade dass ich soweit weg wohne aber der Tag kommt andem ich mal in die Modellbau Hauptstadt komme.. bis dahin Danke und mach weiter so. Gruss Frank

  • @matthiashellwig5702
    @matthiashellwig5702 ปีที่แล้ว +1

    Tolles Video Christian ..und hab wieder was dazu gelernt .
    Danke Beste Grüße

  • @heinzbischl3938
    @heinzbischl3938 ปีที่แล้ว +1

    Klasse Video Christian 👏🏻👏🏻Bitte mehr davon 👍

  • @deepfish4432
    @deepfish4432 ปีที่แล้ว +1

    Schön schön vieleicht sollte ich mir mal doch die 550km auf mich nehmen und vor allem aber diese verflixte Bankkarte zu Hause lassen!! Das wird Dann halt schon schwer echt !!!🤪🤗👍

  • @christianalge4529
    @christianalge4529 ปีที่แล้ว

    Hallo, ganz tolles Video!! Wie kriege ich denn diese mega gute und realistische Bodenstruktur hin. Was kommt denn da als Material auf das Moltofil drauf? Danke und lG

  • @YesSir-vr6wj
    @YesSir-vr6wj ปีที่แล้ว +1

    Leider bekomme ich langsam Platzprobleme, so dass es darauf hinauslaufen wird, dass ich vorhandene Dioramen nur noch verbessern werde. 😖

    • @christianschiller
      @christianschiller ปีที่แล้ว

      Manchmal, aber nur manchmal wird es Zeit sich von alten Zöpfen zu trennen und Neuland zu betreten ;-)

  • @Panzerkeks
    @Panzerkeks ปีที่แล้ว +1

    Leider habe ich die Vorführung total verbummelt. Irgendwie war ich mit den Regalen beschäftigt. Das Moltofil werde ich mal testen. Momentan nehme ich die Modeliermasse aus nem 1 € Laden.

  • @realist3718
    @realist3718 ปีที่แล้ว +1

    Welches Moltofill ist das?

    • @christianschiller
      @christianschiller ปีที่แล้ว +1

      Holz Reparatur Spachtel 1kg in kleinen Eimer ! Ganz wichtig - im Eimer nicht das aus der Tube

    • @ModellbauKoenig_MBK
      @ModellbauKoenig_MBK  ปีที่แล้ว

      Mit dem braunen Deckel.

    • @christianschiller
      @christianschiller ปีที่แล้ว

      @@ModellbauKoenig_MBK da habe ich noch viel lieber , die mit dem roten Halsband 😂😂😂

    • @realist3718
      @realist3718 ปีที่แล้ว

      @@ModellbauKoenig_MBK Ok Danke!

  • @sepp1781
    @sepp1781 ปีที่แล้ว

    Hübsch.Aber auch hübsch teuer.

    • @christianschiller
      @christianschiller ปีที่แล้ว +3

      Umsonst ist nicht einmal der Tod 🤷🏼‍♂️

  • @andrepawlov4820
    @andrepawlov4820 ปีที่แล้ว +3

    klasse!