Just did a counter top with some wildly figured 1" Oregon Walnut that I had stored for 13 years. It took a lot of time and effort to get pieces that I could lay up without too much plane work and sanding but the figuring when finished was worth it!!
Dylan, the table is simply gorgeous. The wood grain is so striking! Your team has done a wonderful job in allowing the beauty of nature to shine through. My compliments apply equally to both the base and the extensions which are as lovely as the table top itself.
@01:39 that middle section to bottom middle of screen. I had around 90 board food of that curly walnut. Sat around FOREVER and I decided to make a coffee table out of it around 41" wide and 55" long just curly burly. I bought it for 22$ a board foot as part of a larger slab. I didn't realize how rare it was now, because I see it semi often for not a lot of money per BF as it's sold as slabs and some of these slabs are 5.5' wide by up to 12' long. Also TITEBOND III FORE LIFE!!!!! I use it for everything. If someone wants to toss a piece outside, go ahead.
That is a beautiful table. The craftsmanship par excellent. I hope to make something like this in the future. Unfortunately, not a lot of room in my garage/shop. Keep up the great work. I really look forward to new videos. Hi Charlie!!
In addition to Bourbon Moth's test of oils combusting, he actually had a fire that burned a section of his fence that, luckily, his neighbor saw and was able to confine it to a small fire.
Jason Bourbon Moth did the test because he knew someone that had it happen in his shop. His fence fire was from rags that he thought were alright and he’d put them on top of a green wheely bin. Very little bin left. Btw love watching your work.
Great video, at 10:08 you mentioned the curly grain and the different densities in the wood that affected the consistency of the initial finish attempt; what did Curtis do to resolve that (after sanding it down and starting a new)?
As a guitar builder myself over at Blackworm Instruments, though this stuff is cool, the market is heavily saturated with curly walnut that just isn't selling as much as the maples are. I vote I'm glad some of this beautiful walnut is used elsewhere versus sitting as cut instrument blocks to collect dust 😂
Your work is impeccable. Question. I am about to finish a ziricote humidor with a River center. You were using Osmo. I would you suggest this product finished with your ceramic coating? Is there something I should do to prep this oily wood? I really appreciate your suggestions. This is a difficult project and I wanted to look amazing.
Can you make a video on bursting air bubbles. I’m in the process of understanding resin and when I poured my first batch, air bubbles could not stop rising. Do I need to seal the wood or am I using the wrong type of wood. I was using lumber.
The resin type matters most, and then how you let the resin cure. Obviously, I'm going to be biased and suggest our Black Forest Deep Resin, which we use for all our pours and it cures over about a week and during the curing process, the bubbles will dissipate on their own. We don't recommend sealing the wood because it can potentially compromise the bond between the wood and the resin, we've had some previous projects where we do that separate from one another. Let me know if you have any more questions!
@@BlackForestWoodCo thank you for the response. Could resin be used to seal the wood? So basically there are different types of resin and the amount of time it takes to cure? And the ones that take longer to cure allow the bubbles to come out for a longer period before the resin hardens?
Do you ever sell the small cutoffs for wood like this? I stabilize blocks of wood for knife handles and forge knives and this wood would be perfect for that!!
I noticed when you were announcing your finish coating was available you excluded the UK as we are not in the EU. Can I assume it won’t be available to us in Britain.
Absolutely stunning craftsmanship as ALWAYS!!! I’m a small cabinet maker in the UK and would love to make the cross table legs to your design for my wife - she thinks they’re the most beautiful legs she’s ever seen!! Would you be willing to divulge your cad drawings for these (obviously I’d pay for the privilege!)? Thank you so much and the exceptional content.
@BlackForestWoodCo you guys are the bomb made, craziest cool stuff anybody will ever find. Joe's table was a piece of art by the way, absolutely amazing
Glad to see Charlie has decided to come out of his corner office and associate with the public!!! What a great looking table. Would have loved to see the table assembled with the extensions in place. Thanks for making a difficult task appear effortless. Outstanding job as always.
Kurtis should wear a Harry Potter shirt that says “your a wizard harry” but replace Harry with Kurtis (please no offense meant if I miss pellets his name)
Hi from Rīga, EU. Why don't you use the United Nations logo Flat Earth map in your videos??? Because Flat Earth is scientifically correct. I actually admire your work! I am the hardest worker myself. Awesome videos!!!
OK ... this is almost WTF question. If theperson (as you say) wanted such specialty wood - then cover up with black resin (and not want to see details) - they whaddaf are they doing asking for such wood - and if don't want to see it or show it off ? This is not a rhetorical question - unless one questions the actual brain cells of the said person wanting a specialty wood table - but they not have it shown off (!!!). Better to put an arm around person, turn around in wood shop, walk out to car, (and Benny Hill slap-tap top of head of small-minded person) and send home to rethink their concept !
13:50 To the window \(•_•\) to the wall (/•_•)/ 😂
Amazing build as always, guys!
If the client paid for it, absolutely not a waste! I love the detail you guys go into as to WHY you're doing what you do.
Agreed!
And thank you so much, we really appreciate hearing that 🙌
CHARLIE.!.!.! Welcome back Charlie... We missed you.!.!.!.!
He's happy to be back!
Hello everyone from Armenia ✌🏼🇦🇲✌🏼
my guy at 0:44 holding that drill like he's trying to wrangle the dreaded double stream in those morning bathroom visits.
I'm not loving that visual 🤣🤣
Nice to see the base done in natural finish instead of the black for a change, another stunning table 👍
Like seeing Charlie ( cute part of the scene he is the mascot cheering on the team)
Yes, he's the best mascot!
Beautiful table and good to get a double shot of Charlie. Thanks
He's been hiding haha
Nice to bring the products to EU , thank you
Of course! 🌍
Beautiful table. Good to see Charlie keeping everyone in line. Stay safe.
Yes, where would we be without him? 🤣
Just did a counter top with some wildly figured 1" Oregon Walnut that I had stored for 13 years. It took a lot of time and effort to get pieces that I could lay up without too much plane work and sanding but the figuring when finished was worth it!!
oh wow, it was just waiting to be used for the right project! I'm glad it was worth the wait! 😄
That table is STUNNING! You Guys ROCK! Nobody Better!
I love curly walnut! Looks amazing.
Us too! Thanks so much 😄
Lovely walnut table and stand looked fab
Dylan, the table is simply gorgeous. The wood grain is so striking! Your team has done a wonderful job in allowing the beauty of nature to shine through. My compliments apply equally to both the base and the extensions which are as lovely as the table top itself.
@01:39 that middle section to bottom middle of screen. I had around 90 board food of that curly walnut. Sat around FOREVER and I decided to make a coffee table out of it around 41" wide and 55" long just curly burly. I bought it for 22$ a board foot as part of a larger slab. I didn't realize how rare it was now, because I see it semi often for not a lot of money per BF as it's sold as slabs and some of these slabs are 5.5' wide by up to 12' long.
Also TITEBOND III FORE LIFE!!!!! I use it for everything. If someone wants to toss a piece outside, go ahead.
That’s why management 🐕 gets paid the big bucks!👍
Hahaha, exactly!
Well done again guys!!!!! and you to Charlie......
Thanks so much, from us and Charlie!
Wow. Beautiful table. Great job Charlie
Thank you! Cheers!
To the window to the wall! ......... lol great build guys love it.
Bourbon Moth showed the problem perfectly.
love this table and love your dedication to value you guys rock
Thank you as always Tim!
What an absolutely wonderful table and the presentation was equally wonderful ! Thanks.
That is a beautiful table. The craftsmanship par excellent. I hope to make something like this in the future. Unfortunately, not a lot of room in my garage/shop. Keep up the great work. I really look forward to new videos. Hi Charlie!!
Great vid. Please buy the mafel tracksaw so you can cut in one pass.
That table is beautiful. I think the beauty of that walnut will be appreciated much more as a table than it would be as a guitar!!
I think so too! 😄
You underestimate how much musicians love beautiful instruments.
Hi 👋 Black Forest, Amazing Table , well Done 👍 Guys, and the boss Charley , 😂. Phil from the moulin
Thanks Phil! Charlie says hello!
In addition to Bourbon Moth's test of oils combusting, he actually had a fire that burned a section of his fence that, luckily, his neighbor saw and was able to confine it to a small fire.
Oh my god, thank god is neighbur was able to help!
Jason Bourbon Moth did the test because he knew someone that had it happen in his shop.
His fence fire was from rags that he thought were alright and he’d put them on top of a green wheely bin. Very little bin left.
Btw love watching your work.
I think that's the nicest table I've ever seen.
Dylan, the table is awesome, but I wanted to see it with the extension on. Why wasn’t that shown in the video? The new hairdo, not so much. 😂
Aww Charlie good to see him. Beautiful table. 💛🤎❤️🧡
This table is absolutely beautiful the wood is amazingly beautiful great work as always. Would love to se it with the extensions put on it .
That’s a killer table!!!
Great video, at 10:08 you mentioned the curly grain and the different densities in the wood that affected the consistency of the initial finish attempt; what did Curtis do to resolve that (after sanding it down and starting a new)?
Finally a table that isn’t 50% epoxy.
Hahaha
Beautiful wooden top
The top of the table is beautiful I like the grain and how the epoxy isn't overpowering and just gives a nice accent.
What an absolutely gorgeous table! Cant help but think what you guys would do for a guitar though, would love to see what you all could come up with!
We actually teach build your own guitar workshops, would you be interested in seeing a guitar build in a future video? 🤔😄
@@BlackForestWoodCo I would LOVE to see a guitar build in a video!!
good job for warehouse in EU. i ll get some for sure now. thanks
That table was beautiful. Thanks for sharing that.
great table and install, glad to see Charly again looks like he might need a trip to barber.
He's going on Tuesday haha! Thanks Bill!
Another beautiful job. Nice to see Charlie.
Beautiful table. Just gorgeous. Question. How often should you reapply the ceramic coat maintain protection?
A beautiful piece of wood. So many colours.
Hi Charlie, how old are you now? You a very handsome pup.
Thanks Debbie!
Charlie is 3 as of June, he is quite a handsome guy!
Nice table. You might want to put subtitles below when you film people talking through their respirators.
Turn on the subtitles / closed captions
Beautiful wood, beautiful table.
Beautiful table sir! I admire your work.
As a guitar builder myself over at Blackworm Instruments, though this stuff is cool, the market is heavily saturated with curly walnut that just isn't selling as much as the maples are. I vote I'm glad some of this beautiful walnut is used elsewhere versus sitting as cut instrument blocks to collect dust 😂
Your work is impeccable. Question. I am about to finish a ziricote humidor with a River center. You were using Osmo. I would you suggest this product finished with your ceramic coating? Is there something I should do to prep this oily wood? I really appreciate your suggestions. This is a difficult project and I wanted to look amazing.
Yeah video that I missed before) gonna watch now while unloading my van from market, trying to sell board with epoxy
Can you make a video on bursting air bubbles. I’m in the process of understanding resin and when I poured my first batch, air bubbles could not stop rising. Do I need to seal the wood or am I using the wrong type of wood. I was using lumber.
The resin type matters most, and then how you let the resin cure. Obviously, I'm going to be biased and suggest our Black Forest Deep Resin, which we use for all our pours and it cures over about a week and during the curing process, the bubbles will dissipate on their own. We don't recommend sealing the wood because it can potentially compromise the bond between the wood and the resin, we've had some previous projects where we do that separate from one another. Let me know if you have any more questions!
@@BlackForestWoodCo thank you for the response. Could resin be used to seal the wood?
So basically there are different types of resin and the amount of time it takes to cure? And the ones that take longer to cure allow the bubbles to come out for a longer period before the resin hardens?
Do you ever sell the small cutoffs for wood like this? I stabilize blocks of wood for knife handles and forge knives and this wood would be perfect for that!!
We put all our cutoffs into a large cart and sell the whole thing for $100!
Question: can anyone link a place where you can shop for these metal/steel mounts for their various legs?
Magnifique travail, comme à votre habitude 😉✌️.
I noticed when you were announcing your finish coating was available you excluded the UK as we are not in the EU. Can I assume it won’t be available to us in Britain.
Absolutely stunning craftsmanship as ALWAYS!!! I’m a small cabinet maker in the UK and would love to make the cross table legs to your design for my wife - she thinks they’re the most beautiful legs she’s ever seen!! Would you be willing to divulge your cad drawings for these (obviously I’d pay for the privilege!)?
Thank you so much and the exceptional content.
Can your customers pick any color in the world for their epoxy river table?
Yup, any colour they want!
Yo, Slovenia shoutout! There are dozens of us watching, no doubt. ❤
To the window, to the wall.13:54
The wood is worth what it is worth, whoever is willing to pay that price can use it however they like
Agreed!
Yes, For instance I wouldn't pay a dime for a fish egg or an oyster. To each his own.
You had me at “over kill”.
🤣
You guys are like my damn dream job.
Maybe one day you'll be working with us haha, you never know!
We appreciate that though, we know we're lucky that we get to do this as a job!
@BlackForestWoodCo you guys are the bomb made, craziest cool stuff anybody will ever find. Joe's table was a piece of art by the way, absolutely amazing
Finish is always the biggest headache! All it takes is one little thing and you're sanding and starting over!!
Yup! It rarely goes perfectly in 1-try 😆
what happened to extensions ...
I thought you were going to break out in a rap with the "to the window to the wall." 🤣😂
did you share the price?
This one was $25k CAD
and worth every penny
Glad to see Charlie has decided to come out of his corner office and associate with the public!!! What a great looking table. Would have loved to see the table assembled with the extensions in place. Thanks for making a difficult task appear effortless. Outstanding job as always.
I wish your future customers would be a little more adventurous and pick purple or teal or even pink :) I'd love to see that!
We would love to see some different colours! We do have a beautiful green table we'll be posting in the new year though!
Excuse me,why are you using the rail underneath the table
If I had your machinery I’d be trying some new designs weekly. The x base is cool but I’d love to see you get creative and try something new
Maybe we'll have to experiment and make a video out of it!
There is no way the “to the window, to the wall” was said by accident
Hahaha, it was the directions he had to give
Hi Charlie🐾🥰🐾lookin good
Hi Josie! Charlie says thank you!
where is Spencer ???
How did nobody finish the song? 😂
Kurtis should wear a Harry Potter shirt that says “your a wizard harry” but replace Harry with Kurtis (please no offense meant if I miss pellets his name)
Baby Charlie 😢
Turtle Wax Ceramic $13
No way that slab would get anywhere near 500 guitars
Hi from Rīga, EU. Why don't you use the United Nations logo Flat Earth map in your videos??? Because Flat Earth is scientifically correct. I actually admire your work! I am the hardest worker myself. Awesome videos!!!
That dude literally said to the window....to the wall. And nobody said a word. I'm disappointed.
OK ... this is almost WTF question. If theperson (as you say) wanted such specialty wood - then cover up with black resin (and not want to see details) - they whaddaf are they doing asking for such wood - and if don't want to see it or show it off ? This is not a rhetorical question - unless one questions the actual brain cells of the said person wanting a specialty wood table - but they not have it shown off (!!!). Better to put an arm around person, turn around in wood shop, walk out to car, (and Benny Hill slap-tap top of head of small-minded person) and send home to rethink their concept !
I think that extruded black aluminium looks cheap and off the shelf, surely you can do better than that !
So you pay your guys a decent wage? Good.
To the windooooooow to the wallllll
Hahaha
LOL love you guys! @@BlackForestWoodCo
@@GuillotineStare We love you too 🫶
Another amazing piece!!! Congrats on going global with your products, not just a little Alberta Company anymore 🫡
Thank you so much! Yes, we're so lucky with the growth we've experienced in the past few years!