Hi Dirk, stattliche Petromax-Ansammlung hast Du da 😲 vor allem, was ich klasse finde, Du hast immer noch die Original Prospekte dabei! *Super* 🔝 Immer wieder schön Dir mit zuzusehen, wie liebevoll Du mit den älteren Sachen umgehst. Da macht das zuschauen mal richtig Spaß! 👍 Hab einen schönen Abend und genieß die Zeit! LG Uwe
Hey Uwe, vielen lieben Dank fürs zuschauen👍es freut mich das dir mein Filmchen gefallen hat. Es macht einfach Spaß solche alten Dinge am Leben zu halten... Schade nur das die Lampe nichts aus ihrem 90 jährigen Dasein erzählen kann... das wäre sicher interessant. Hab du auch einen schönen Abend, LG Dirk
servus dirk jetzt weiss ich auch wer die ganzen Petromax hortet ,schau dir mal die Doku Nanga Parbat 1953 von Hans Ertl an ,da sieht man auch die eine oder andere Petromax Lampe,Benzin/Petroleum kocher etc schönen sonntag dir noch gruss michael
Servus Michael, Nen paar Lampen haben sich im laufe der Zeit schon angesammelt😉 Danke für den Tip, werde ich mir anschauen👍 Danke, Dir auch einen Schönen Sonntag, Gruß Dirk
Great video,thank you,I also have a Petromax 826 lamp,if you look at my channel you will see mine,I just had to tighten the nipple very tight as fuel was leaking from it.It is my best Petromax lamp,I have a few more,Thank you,Fions
Hello Fiona, I looked at your video, the carburetor of your lamp will be clogged. you can easily clean it with an old bowden cable from the bike. The filament becomes stuck and therefore the petroleum can no longer gasify. this leads to the flame aura as seen in the video. best regards Dirk
@@noregunterwegs1278 Hello Dirk,thank you so much,if you look at the other video you will see the same lamp working very well,I just tightened the jet nut with a spanner ...thank you,I think it is the same lamp as yours? Maybe the hood is newer on mine.. Very similar and says Petromax 826 on the bottom.. must try to polish/clean it. Are you a member of Classic pressure lamps? Kind regards, Fiona I only use oil lamps
Hello Fiona, seems to be the same lamp. a petromax 826. polishing will be difficult because it is not chrome. the lamps were then nickel-plated. i am not a member Greetings from Germany Dirk
@@noregunterwegs1278 Hello Dirk, I hope you are well? I wonder can you help me with my Petromax 826 lamp? I think the carburetor might need to be cleaned as there is a flame aura coming outside the mantle.Do I take off the jet and then open the large nut lower down the curly tube(carburetor) and carefully remove the curly tube and then clean the inside of it with something? Kind regards,Fiona
@@fionafarrell43 Hello Fiona, yes exactly, you have to loosen the nut and remove the upper part of the carburetor. and unscrew the nozzle at the top. Then I take a drill that has the same diameter as the carburetor and turn it by hand to loosen the coking. Once from below and from above, whereby you have to pay attention to the thread at the top. From time to time I knock the carburetor out on a piece of wood. After that I always take a piece of the Bowden cable from the bike or moped and now it gets tricky. You have to try to get that into the coil from above in order to clean it with it. There will probably also be a lot of coal in there. You can also simply test whether the coil is seated by putting the carburetor rod into the carburetor and trying to blow through the carburetor. Finally I put the parts in an ultrasonic bath, if necessary just hot water with a lot of citric acid in it. Kind Regards Dirk
Super! Das alte Schätzchen tut's noch wie früher! Diese Dinger sind echt voll der Hit! Danke für das schöne Video! 🤗👍
Da war auch nur eine kleine Wartung fällig und schon wurde es wieder Licht🔥
Hi Dirk, stattliche Petromax-Ansammlung hast Du da 😲
vor allem, was ich klasse finde, Du hast immer noch die Original Prospekte dabei! *Super* 🔝
Immer wieder schön Dir mit zuzusehen, wie liebevoll Du mit den älteren Sachen umgehst.
Da macht das zuschauen mal richtig Spaß! 👍
Hab einen schönen Abend und genieß die Zeit! LG Uwe
Hey Uwe, vielen lieben Dank fürs zuschauen👍es freut mich das dir mein Filmchen gefallen hat. Es macht einfach Spaß solche alten Dinge am Leben zu halten... Schade nur das die Lampe nichts aus ihrem 90 jährigen Dasein erzählen kann... das wäre sicher interessant. Hab du auch einen schönen Abend,
LG Dirk
Schönes Video. Tolle Lampensammlung. Petromax un feuerhand 4 ever.
Dank dir fürs anschauen Andreas👍
Nice antique from the 30's !! . I also have a 1500 rapid from the 60's - a very scarce model- and a modern 829 lantern.
Servus aus Vorarlberg 😄🇦🇹
Das ist ein wunderschönes Stück🥺
LG Leopold 🤗
Servus Leopold,
Vielen Dank das du dir mein Filmchen angeschaut hast und dir die 90 Jahre alte Dame gefällt. LG nach Vorarlberg,🤗
Dirk
@@noregunterwegs1278 sie ist auf jeden Fall einen Prachtstück😄
servus dirk
jetzt weiss ich auch wer die ganzen Petromax hortet ,schau dir mal die Doku Nanga Parbat 1953 von Hans Ertl an ,da sieht man auch die eine oder andere Petromax Lampe,Benzin/Petroleum kocher etc
schönen sonntag dir noch gruss michael
Servus Michael,
Nen paar Lampen haben sich im laufe der Zeit schon angesammelt😉
Danke für den Tip, werde ich mir anschauen👍
Danke, Dir auch einen Schönen Sonntag,
Gruß Dirk
Great video,thank you,I also have a Petromax 826 lamp,if you look at my channel you will see mine,I just had to tighten the nipple very tight as fuel was leaking from it.It is my best Petromax lamp,I have a few more,Thank you,Fions
Hello Fiona, I looked at your video, the carburetor of your lamp will be clogged. you can easily clean it with an old bowden cable from the bike. The filament becomes stuck and therefore the petroleum can no longer gasify. this leads to the flame aura as seen in the video. best regards
Dirk
@@noregunterwegs1278
Hello Dirk,thank you so much,if you look at the other video you will see the same lamp working very well,I just tightened the jet nut with a spanner ...thank you,I think it is the same lamp as yours?
Maybe the hood is newer on mine..
Very similar and says Petromax 826 on the bottom.. must try to polish/clean it.
Are you a member of Classic pressure lamps?
Kind regards,
Fiona
I only use oil lamps
Hello Fiona, seems to be the same lamp. a petromax 826. polishing will be difficult because it is not chrome. the lamps were then nickel-plated.
i am not a member
Greetings from Germany
Dirk
@@noregunterwegs1278
Hello Dirk,
I hope you are well?
I wonder can you help me with my Petromax 826 lamp?
I think the carburetor might need to be cleaned as there is a flame aura coming outside the mantle.Do I take off the jet and then open the large nut lower down the curly tube(carburetor) and carefully remove the curly tube and then clean the inside of it with something?
Kind regards,Fiona
@@fionafarrell43 Hello Fiona, yes exactly, you have to loosen the nut and remove the upper part of the carburetor. and unscrew the nozzle at the top. Then I take a drill that has the same diameter as the carburetor and turn it by hand to loosen the coking. Once from below and from above, whereby you have to pay attention to the thread at the top. From time to time I knock the carburetor out on a piece of wood. After that I always take a piece of the Bowden cable from the bike or moped and now it gets tricky. You have to try to get that into the coil from above in order to clean it with it. There will probably also be a lot of coal in there. You can also simply test whether the coil is seated by putting the carburetor rod into the carburetor and trying to blow through the carburetor. Finally I put the parts in an ultrasonic bath, if necessary just hot water with a lot of citric acid in it.
Kind Regards
Dirk
Was ist denn drin? Benzin oder Petroleum?
Petroleum