I pulled the bench seat and the seat adjuster out. Gave me like another 5 inches. I'm 6'2" and I fit perfect in it with the bench and seat mounts removed. Welded in a couple cross bars of angle iron to mount the bucket seat. Its a single seater but you can fit 2 jegs bucket seats in it.
I put one on my son's Yerf Dog 2303 when they were only $89.00. Easy to line up the sprocket by just moving the gear on the axle a bit. Put a Stage 1 and and header and removed the Governor. That thing ran strong and fast with tons of torque. Even put after market front shocks on it. It would climb huge really steep grassy hills from a standing start, but it was totally horrible off road. HUGE turning radius, no ground clearance at all, and the suspension is only good for rolling hill. Any significant bump and it would jar your bones soooooo bad!
Hey do you have more details/pics/parts you used to connect the throttle ? I’m basically getting a variation of the 212 for our 3203 and this video let’s me know it will certainly fit
Hey man loved the vid, I know it's been a while since you posted it but I was wondering if the stock torque converter on the Tecumseh would bolt up to the 212 predator? And I was wondering what size of wheel and tire we're on the front? If you could get back to me that would be a huge help.
What size spacer did you use on the engine shaft for the for the driver clutch? I have this same go kart with the 212cc and the belt is not lined up using the 1/4” spacer. Looks like it may need a 1/2” spacer? Also what bolt size did you use to connect the driver clutch to the shaft? I know it’s a fine thread....5/16”? What length? Thank you!
Doesn't matter too much just any 30 series torque a verter (tav) and make sure you get the bolts to mount it u need fine thread 5/16 most kits might not come with right ones hope I helped😸
I have one and I am going to Revamp the frame and especially that gay ass wider than the rear front end Man those engines these things come with SUCK ASS
My dad bought me one for my 14th birthday, and ever since my uncle and him been modifying it.
I pulled the bench seat and the seat adjuster out. Gave me like another 5 inches. I'm 6'2" and I fit perfect in it with the bench and seat mounts removed. Welded in a couple cross bars of angle iron to mount the bucket seat. Its a single seater but you can fit 2 jegs bucket seats in it.
Can I see yours I’m 6’2 I just purchased one from a buddy
That's good dude! Take your kid with ya. That's the kind of thing I remember from childhood. I try to do the same for my kids too.
Amen to that brother!
Subscribed, saw you on Craigslist and searched you when I saw your add. Good video! - Steven Sanford N.C.
awesome, welcome to the family
Nice work bro! Awesome to see you got the kid involved! Can’t wait to finish my first kart and take my oldest for a ride.
I put one on my son's Yerf Dog 2303 when they were only $89.00. Easy to line up the sprocket by just moving the gear on the axle a bit. Put a Stage 1 and and header and removed the Governor. That thing ran strong and fast with tons of torque. Even put after market front shocks on it. It would climb huge really steep grassy hills from a standing start, but it was totally horrible off road. HUGE turning radius, no ground clearance at all, and the suspension is only good for rolling hill. Any significant bump and it would jar your bones soooooo bad!
Hey do you have more details/pics/parts you used to connect the throttle ? I’m basically getting a variation of the 212 for our 3203 and this video let’s me know it will certainly fit
My kids go cart has a 110 in it. In drive it boogs down and has little to no power. All though in reverse it does find. Any idea?
Hey man loved the vid, I know it's been a while since you posted it but I was wondering if the stock torque converter on the Tecumseh would bolt up to the 212 predator? And I was wondering what size of wheel and tire we're on the front? If you could get back to me that would be a huge help.
It does but you'll have to find the right size belt
Hey buddy. What is your top speed with that sprocket and torque converter??
I have the same thing but with a little bit of mods and it hit about 45 to 50 with mods
@@Noname09707 what mods do you have?
@@Noname09707 what mods???
@@Noname09707 what mods ?
What size spacer did you use on the engine shaft for the for the driver clutch? I have this same go kart with the 212cc and the belt is not lined up using the 1/4” spacer. Looks like it may need a 1/2” spacer? Also what bolt size did you use to connect the driver clutch to the shaft? I know it’s a fine thread....5/16”? What length? Thank you!
Use washers as many as you need until the desired space is achieved.
I've got a big carter bros cart and I plan on doing the same setup, I hope it works as we are the family where nothing EVER works lol
BTW I had an old Briggs on it and that failed miserably😫
Good luck!
Great work sir. Looks like she goes alright. The Yerf Dog buggies look popular over your way. Good stuff mate.👍
Is a torque convertor the same as a centrifugal clutch?
What kind of Cable is that? I have the same set up and I'm looking to replace that. Thanks
Have you ever had to replace the jackshaft bearings. Mine just went out and I can't remove the sprocket or the drive portion of the torque converter.
No sorry.
What kind of spacer did you put behind the torque converter to line the belt up?
Hey did u use the original torque converter I swapped mine but stock torque converter won’t work belt don’t line up ???
Also got some questions about your dune trike , I might be picking one up for another project how do I get ahold of you bud?
you can message me on Facebook at Kartastrophic Garage
Hello, what size tires and what color red paint you use? Seems to be a nice setup
What is squeaking the bearing for the torque converter? Or the front wheels and steering? I'd love to find just a decent frame for sale
The squeaking was the brakes they were old and the cart hadn't been ran in a while but still had plenty of brake pad left.
Have you seen a vin # on that model?
what is that plate cold
How many teeth are you running on the torque converter sprocket, and how many teeth on the big sprocket? I’m thinking about doing a similar build.
Do you really need the belt
anybody know this song or group?
I noticed that you installed the 30 series clutch without a face plate, it is better to purchase the clutch alone or a full conversion kit?
Depends on your set up
Yerf Dawg! Do it to it bud we just finished up doing a klipper sidewinder go kart check it out . And yes I’m a subscriber not a troll lol
What kind of belt did you use?
how tall are you? it looks a little small, im 6'2"
FatCity Customs I'm 6'4"
Not small at all I have the exact same one
I got a dingo with the 212 predator in it and replaced it with the tillotson 212 hemi with all the upgrades. Such a better option than the predator
Wish you was in fla im about to buy a used one for 300 engine not running what you think?
Please tell me you wanted to take the governor off,you just left it on for selling purposes. .......😢
Hey what belt did you use
Size ?
Could I use the stock torque converter? If the shaft size is the same
Yes
What spacer did u guys use
Which length jackshaft are you using? 8" 10" or 12"
Sorry I'm not sure. It's been so long ago.
When you do all that work and forget to spray the squeaky tie rods. 😂
Hey bro I need help I have the exact go cart and I bought the 212 predator witch torque converter do I bye
Doesn't matter too much just any 30 series torque a verter (tav) and make sure you get the bolts to mount it u need fine thread 5/16 most kits might not come with right ones hope I helped😸
At least the bolts on my engine where fine thread but maybe not all of em
Gopowersports.com
Do u remove the governor ?
I keep my Motors completely stock they seem to work better and last longer that way.
No he did not.
Where did you get torque converter kit??
I buy them on ebay now..
Do you remember what size the chain is ?
How much your go kart cost
I put a 16hp motor with electric start on my daughter's yerf dog go kart
How is it with a 16HP motor?
Hey man do you trade gokarts
I need another one bad I’m to y’all for the one I have
No sorry I only have one kart right now
Do you get other gokarts or no
@@musclecarshaun9115 sometimes. I have a smaller one seater right now but I have to un freeze the steering then get it going. It will be for sale.
Ok what kinda of motor it has
How much
what was the top speed on that or at least what do you think it was
3xs the speed of smell
What model is that?
I'm not really sure.
3203
where is this 4 sale at?
Jolin Mahoney it's already been sold.
¿CUAL ES LA VELOCIDAD MÁXIMA DE TU GOKART?
Giovanni Rojas es 31 tiene el motor 212 & el mio hase 45 tiene 212 con stage one y no tiene governador
4 seater!!!!!!!
Hey man keep up the good work
Let that poor baby ride its a kids cart dude
That thing runs like its electric.
I put a 230cc atv 5 speed on mine ;)) its fucking savage.
Just got one today 100 bucks coworker special ...
I picked one up less than a week ago. $160
That's a deal
The tecumseh on that was a better motor.
TheMan TheLegend I still have it. I keep a lot of the parts I take off.
sell you one right now 200
Thankyou
Somebody help please
Ebay , search 30 series torque converter. U can find them for around $55 / $60.
Kartastrophic Garage than you brother
Kartastrophic Garage Theres a 3/4 and 5/8 which one
3/4
Kartastrophic Garage Thanks brother I subscribed to your channel tnx again
I have one and I am going to Revamp the frame and especially that gay ass wider than the rear front end Man those engines these things come with SUCK ASS
Can you link the conversion kit! I need this set up!! Thanks brother!
I have a 212 motor now. I need that conversion kit! Thanks!