l need to start at the beginning of your list. l am a beginner programmer, the last shop l worked forbid us to try. The one l am at now requires it, you are awesome dude keep cranking them out and God bless you for it.
same here, it is stupid to me when some shop want to purchase mazak with mazaktrol built in but all they want you to do is EIA...If they want to do that buy a cheap fanuc instead.
I thread at 400 sf on almost all metals, angle is 60 but 59 gives a better finish and I autoset thread height. thread taper is 3/4 over a foot or 1.7889 angle for mpt what chamfer do you use? I have always used thread pitch. nice vid
How about lead out angle on the thread? Some proprietary threads that we cut require a specific pull out distance on the thread. The specs give a distance to the last full depth of thread and they also specify a "final scratch" distance.
I worked with a guy who was pretty good at a die shop ,he was taking about .010 pass on D2 shafts .And Im like wth I always did .003 and I got see the finish cause its going to be bad.Anyway it looked like a corncob ,other guy seen him was like good god" .For a guy that was in the trade for 20 yrs I thought it was rough shod work ,and if Im out thinking you wether you want to increase production time thats cool but be a craftsmen .Your threads are how they should be done .Industry now in days its all about spitting out something than quality.
Hi, i working with an Nexus 250 II. But i have problems to understand the mazatrol nexus program and programming. Could you please make a video or ,,mini videoseries" where you explain it? Preferably in german language :D
Thanks so much for these videos! I just got a job running Mazatrol and these tutorials have been really helpful.
My coworker is not in today and we have only gone over threads once or twice on the mazatrol and this just helped me get it done. Thanks for the video
I need more and more videos like this.....Good job ! Thanks !
l need to start at the beginning of your list. l am a beginner programmer, the last shop l worked forbid us to try. The one l am at now requires it, you are awesome dude keep cranking them out and God bless you for it.
same here, it is stupid to me when some shop want to purchase mazak with mazaktrol built in but all they want you to do is EIA...If they want to do that buy a cheap fanuc instead.
More videos please, I love your way of teaching it's simple and very informative. Thanks a lot.
Your videos are awesome! You should continue with other operations like boring.....etc
I thread at 400 sf on almost all metals, angle is 60 but 59 gives a better finish and I autoset thread height. thread taper is 3/4 over a foot or 1.7889 angle for mpt what chamfer do you use? I have always used thread pitch. nice vid
How about lead out angle on the thread? Some proprietary threads that we cut require a specific pull out distance on the thread. The specs give a distance to the last full depth of thread and they also specify a "final scratch" distance.
Nice video helpful, one more thing how you set date and time on mazaktrol smart 250 ?
Nice lesson you need to shwo tool touchoff from part x and z we used c and z being k.dia and front of part .keep it up.
milling ? :) BTW great quality of sound and picture
Can you do face threading with these machines?
I worked with a guy who was pretty good at a die shop ,he was taking about .010 pass on D2
shafts .And Im like wth I always did .003 and I got see the finish cause its going to be bad.Anyway it looked like a corncob ,other guy seen him was like good god" .For a guy that was in the trade for 20 yrs I thought it was rough shod work ,and if Im out thinking you wether you want to increase production time thats cool but be a craftsmen .Your threads are how they should be done .Industry now in days its all about spitting out something than quality.
can u show us how to do bar in , with pocket angle and grooving with 15 degree angle on both side . Thanks very much
yes more mazak
please post some more video about parameter ,thank you .
Hi, i working with an Nexus 250 II. But i have problems to understand the mazatrol nexus program and programming. Could you please make a video or ,,mini videoseries" where you explain it? Preferably in german language :D
I have a question lead and hgt where to find What is the mathematical operation Thank you for your videos I'm waiting for more
lead it 1divided thread pitch. eg. 1/14=.07142 as for height i have always auto set for standard threading
I understand everyrhing your saying, just too quick. Lol
Brajesh yadav
5:10
Do you have video tutorials for sales or training class for mill and lathe Mazaktrol m plus?
Where you have you job?
I was working t plus cnc machine (mazatrol program ) easy programming not g codes fast to program
I live in Denver Colorado.
@@Dragon-cs2xz yo aqui L A
De donde eres ? Si hablas español?
OMG, It's so complicated! Advance Once Touch IGF Software on Okuma machines is much more better than this crap!