This RC Plane is TOO Fast | ATOMRC Dolphin

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ม.ค. 2025

ความคิดเห็น • 28

  • @dihler55
    @dihler55 3 ปีที่แล้ว +4

    The dolphin is very high on my want to buy list.

  • @MasonRoswell
    @MasonRoswell ปีที่แล้ว +2

    nice consider this one of you tubes finest pieces.

  • @bisopbisopbisop
    @bisopbisopbisop ปีที่แล้ว

    "aeromodeling" powa!
    Nice video

  • @illuminatorix
    @illuminatorix ปีที่แล้ว +1

    Hey, can you tell me something? Why would it need 6s on a 2400kv motor? With a 6x6e prop and 4s what would be the outcome? Isnt 6s an overkill? On a motor of about 2200 kv if i remember correclty and a 7x6 prop on 6s, I got 140amps and 3000watts!!!

    • @AllThingsElectric_
      @AllThingsElectric_  ปีที่แล้ว +3

      6S is absolutely overkill! That's why I did it ahaha!

    • @breckfreeride
      @breckfreeride 7 หลายเดือนก่อน

      ​@@AllThingsElectric_there's no kill like overkill!

  • @brezovprut4431
    @brezovprut4431 2 ปีที่แล้ว +2

    Is it suitable for long range inav/ardupilot missions?

    • @AllThingsElectric_
      @AllThingsElectric_  2 ปีที่แล้ว +1

      Yes! There is a lot of room in the fuselage

    • @trumblez
      @trumblez 11 หลายเดือนก่อน +1

      Its actually made for fpv and gets around 88mah/km or 130mah/mile

  • @balloonMsc
    @balloonMsc 10 หลายเดือนก่อน

    Love the vid bro keep it up 👍

  • @galaxiedance3135
    @galaxiedance3135 10 หลายเดือนก่อน

    Honestly, what I would do is take all these parts... make a mold of each one, THEN, if any of the parts break, you've got your mold and you can make ANY part that you want again with foam and it'll be perfect. Then besides motors batteries etc, you'll never have to invest any more money into your plane again. If you 3D scan the shapes somehow, you could increase the size a certain amount and perhaps 3D print them out? Just ideas but I'd love to mess around and try those things. Being a Tool & Die Maker I feel very confident in making it work. Now I have kids to watch all the time but later when I have more free time, I'll get into something like this. I love electronics, until then, the tech will just get better and better.

    • @roadstar499
      @roadstar499 10 หลายเดือนก่อน +1

      I wish i knew how to make molds for a couple of foam planes i have...but where do you buy epo or epp foam that can be mixed and pored in a mold?...i have become an expert at repairing crashed and destroyed foam planes over the years,but learning to make perfect foam replacement parts would be very cool...do you know of any channels that have tutorials on making rc plane parts? ANYway thanks for sharing..

  • @matejbludsky8410
    @matejbludsky8410 2 ปีที่แล้ว +6

    Nah hee wing f01 is the fast one.. 6s 2300kv 2207 or JUST f80 5x7 And 60amp esc (not that it needs the amps but needs the size to not desolder the cables) .. you'll do 200mph easy

  • @staydown.normal5323
    @staydown.normal5323 2 ปีที่แล้ว

    and why would you use a 40amp 6s esc you should have gotten the 60 amp 6s esc thats what I have on my sonic modell pro 1000m with 1400kv v3 sunnysky motor

  • @roadstar499
    @roadstar499 10 หลายเดือนก่อน

    You can achieve 120 mph with a 3s battery with the right plane and parts.

  • @bisopbisopbisop
    @bisopbisopbisop ปีที่แล้ว

    all fuking things electriK

  • @cwwisk
    @cwwisk ปีที่แล้ว

    Lol 2400kv 6S... next youre gonna say 2200kv 8S

    • @AllThingsElectric_
      @AllThingsElectric_  ปีที่แล้ว

      2400kv 6S is actually comical. I’m surprised the motors have handled it for so long. My racing drone has ran these motors for years and still perfectly fine

    • @cwwisk
      @cwwisk ปีที่แล้ว

      @@AllThingsElectric_ 2400kv 6S is not out of the question with a good tune.

  • @trumblez
    @trumblez 11 หลายเดือนก่อน

    And its not even a very fast fpv plane

  • @breckfreeride
    @breckfreeride ปีที่แล้ว

    Lol not too fast... Ever

  • @staydown.normal5323
    @staydown.normal5323 2 ปีที่แล้ว

    slow. i can go 120mph on my sonic modell 600m 2450 kv motor 4s 40amp zohd esc 6x4.5 6045 inch electric propeller

    • @donovanswift5010
      @donovanswift5010 2 ปีที่แล้ว +5

      100mph is not slow, yours is just faster.

    • @breckfreeride
      @breckfreeride ปีที่แล้ว

      120 is a cake walk... Flew my wings off the rad jet at 180mph.

    • @staydown.normal5323
      @staydown.normal5323 ปีที่แล้ว

      @@breckfreeride what motor esc combo or you lyin

    • @breckfreeride
      @breckfreeride ปีที่แล้ว

      @@staydown.normal5323 lying? please... That is not even breaking a sweat for the rad jet stock in a full power dive with the right prop. I'm also over 9000 feet above sea level. I don't recall the setup. Was running 4s and old quad motors on 5x5 or 6x5 props. I bet you could get 100mph out of the stock setup on 4s.

    • @staydown.normal5323
      @staydown.normal5323 ปีที่แล้ว

      i know what im talking about 4s yes 128 top speed for me but 6s your motors burn up and 90mph lmao 6045 prop on 4s your motors last one rip and they burnt 40amps@@breckfreeride