I'm glad we finally have a reliable local gun manufacturing company, I was always worried about getting our weapons secondhand from the US, with more manufacturing power paired with our abundant resources, it's possible we won't have a shortage in firearm supply.
Bilang isang pilipino..subrang proud ako dito!! sana marami pang magagawa ang mga pilipino na ipagmalaki natin sa buong mundo balang araw..at ipag malaki din tayo ng ibang bansa sa ganda at kalidad ng tating kagamitan balang araw!!
Masyado kasi mahal kung gumawa ng sariling atin. Sa pag research palang laki na gagastusin. Kaya madami bansa ang bumibili nalang ng armas sa iba kasi mas nakakatipid sila. So ok na muna kahit sa small arms lang muna mag start ang ph malay natin few decades umasenso na bansa.
the man behind the gun talaga.. here 12 years M16 Armscor gamit ko sa rifle competition namin (PAFwide) native talaga ehehe pero di ako pinahiya.. (kaya lang CB upper assy ko)..😂
China needs to watch out these Filipino elite soldiers, I’ve heard even just ordinary citizens have this ability in case War broke loose, they have a lot of reservist. They do target shooting just for fun 😮
Plus the mere fact that there are dozens of backyard gunsmiths .. I aint joking i own a M1911 build without license that only cost a 10-20 dollars ....
Yup. We march around under the sun with wooden fake rifles on the weekends in ROTC and civilian "army training". And nobody ever brought in a real firearm for familiarization in all those 4 years of required civilian training. The only people who have ever held a rifle in the Philippines are police, military, the very rich, criminals and rebels. The majority of Filipinos have lived and died without experiencing handling a firearm, much less experienced shooting one.
Good, now we're actually can build our own weapons than buy outside our nation, we should also develop not just small arms but our ships, our vehicles as well restore our former steel companies and build our own brand.
Keep it up, hope these products get better. In reality I have made a better rifle in my living room here in the US than those. But atleast it's a start. Seems like a early 2000s style AR.. needs more innovation, but it's a start!
Ngayon lang naibalik kamo Kay apo lakay libo-libong baril kung maka produced dati although nandyan Sila palagi di tulad noon na marami Silang na po produced
Sana may lumabas na short stock para sa urban warfare. Tapos shotguns and sniper rifles. Compact pistols din sana na pwede for civilian market. Okay pag locally made, madaling ipaliwanag pag may gustong customizations.
@ 1:49 Pistol member not holding his gun correctly. Thumb behind. You use that grip to shoot compact revolvers or old, cowboy style single-action revolvers so that you can pull hammer for each shot. You will cut your thumb with the reciprocating slide on a semi-auto and you have less control, also. More training.
What are you talking about?! That barrel is even thicker than a regular M16 barrel. It looks more like a bull barrel. A pencil barrel is a skinny, lightweight barrel. You don't know what you're talking about.
I think they're already changing their machine guns with the light machine guns(5.56) like what Singapore did when US marines also changed their SAW(?) to IAR27(?). I don't know if it's the PH Army or Marines, or both tho.
@@night8285 they won't do that. As far as I understand the M60 GPMG/MMG is used as a platoon level asset while the K3 and Minimi are used as squad level assets. There's no switch that's happening.
We still do us the old M16A1's, but the ones shown here (to my knowledge) are modern variants using the same or similar furniture to save money. Quadrail handguards and collapsing stocks are more expensive to manufacture compared to the polymer fixed stocks and handguards.
Remington R4 is a mistake specially if they keep using Carrying handle because too broke in real life situation to afford a single Magnifier or optical sights.
tanung dyan ay yung durability ng unit yung bakal na ginamit lalo na sa barrel di lang accuracy ang dapat 99 percent dapat yung durability ganun dun in case of war eh tatagal kht ilang bwan o taon na bakbakan
Hindi questionable quality ng UDMC, matagal na ang UDMC gumagawa ng baril, infact in partnership sila ngayon sa isang South Korean defence company at nakakapag benta din sila ng baril sa US.
@@miks5830 funding for R&D will be a problem, plus the added issue of production when the time comes. Aesthetics come after practicality and logistics.
Mga congressmen dapat gumawa ng batas na uunahin muna ang supplier ng armas na locally made and owned companies bago sa labas! Second, help finance locally owned companies in research and development for self reliant defense arms.
UDMC is a known Fraud when it comes to their product. Due to bid irregularity, they are now disqualified from supplying 19,000 units of 9MM pistols to PCG. their CEO has not been honest about their products and services, and has a poor reputation in our community.
It'll be nicer if this so called "locally made rifle" put their prices up base on the manufacturing cost and not base on what's the price of basic 5.56 on the market.. yes it's nice that we have a locally made rifles.. but the owner of this companies milking the civilian market for a price that's almost 3x more the manufacturing price of the rifle
Why look for Adjustable Stocks when these forces barely use Body Armor? Even U.S. Forces readying for Jungle Fighting are dropping the heavy plates common in OEF/OIF campaigns.
Its just copy American M16 or M4 if the gun look like titanfall i would be amazed because half the guns in titanfall / Apex legends manufacturer in Philippines
![[LIVE] : ONE ลุมพินี 89 | คู่เอก "ยอดไอคิว vs คิริลล์"](http://i.ytimg.com/vi/Z3vYkHJ_5Ig/mqdefault.jpg)
![สาวเมืองเพชร - ธีเดช ทองอภิชาติ [Official MV]](http://i.ytimg.com/vi/kEt7F9PvO3I/mqdefault.jpg)
I'm glad we finally have a reliable local gun manufacturing company, I was always worried about getting our weapons secondhand from the US, with more manufacturing power paired with our abundant resources, it's possible we won't have a shortage in firearm supply.
Reliable?? Nahh.
So many negatives about this company that's why most weapons of the armed forces are not from this company.
@@night8285 quality is crap...
@@night8285Oh you mean the ones that came from MaxDefense review? It's already been debunked that the pictures used are from ELISCO not UDMC.
i would have took your word if you were talking about rock island
Bilang isang pilipino..subrang proud ako dito!! sana marami pang magagawa ang mga pilipino na ipagmalaki natin sa buong mundo balang araw..at ipag malaki din tayo ng ibang bansa sa ganda at kalidad ng tating kagamitan balang araw!!
Not only rifle we need to produce. We need to produce grenade, missiles, ammunition for aircraft and artillery..
Kaya sana pero walang incentives mga nasa gobyerno
Masyado kasi mahal kung gumawa ng sariling atin. Sa pag research palang laki na gagastusin. Kaya madami bansa ang bumibili nalang ng armas sa iba kasi mas nakakatipid sila. So ok na muna kahit sa small arms lang muna mag start ang ph malay natin few decades umasenso na bansa.
Rifle is not enough pero good start keep it up, support locally made
actually may sniper rifle narin na gawang Pinoy
"Carbine"
Yeah astig yan keep it up mga soldiers protect natin bansa natin para sa peaceful!
Filipinos are BASED, damn, much love from France
the man behind the gun talaga.. here 12 years M16 Armscor gamit ko sa rifle competition namin (PAFwide) native talaga ehehe pero di ako pinahiya.. (kaya lang CB upper assy ko)..😂
Mganda sana kung may civilian version cla nito oh gaya ng AR15.
Mas mabenta sa civilian market ang UDMC over sa military contracts.
China needs to watch out these Filipino elite soldiers, I’ve heard even just ordinary citizens have this ability in case War broke loose, they have a lot of reservist. They do target shooting just for fun 😮
Maraming nuclear missile ang china , paano ang galing.
Plus the mere fact that there are dozens of backyard gunsmiths .. I aint joking i own a M1911 build without license that only cost a 10-20 dollars ....
Di naman na tayo aabot sa land invasion. Bobombahin na lang nila tayo
Yup. We march around under the sun with wooden fake rifles on the weekends in ROTC and civilian "army training". And nobody ever brought in a real firearm for familiarization in all those 4 years of required civilian training. The only people who have ever held a rifle in the Philippines are police, military, the very rich, criminals and rebels. The majority of Filipinos have lived and died without experiencing handling a firearm, much less experienced shooting one.
Apelyido pa lang ng may ari ng UDMc Chinese na! pinagsasabi mo?
Good, now we're actually can build our own weapons than buy outside our nation, we should also develop not just small arms but our ships, our vehicles as well restore our former steel companies and build our own brand.
Mabuhay ang Pilipino tangkiliking ang sareling atin!
the M16 here has an ELCAC variant of a scope i think. its cool to see that it isnt just canada is using it.
May the Filipino flag never be red side up. For whoever faces my cousins, you won’t know it till you’re bleeding that very red on that flag.
good job and lets support the local company
Its been years and finally may nakapag cover narin ng UDMC
Filipino army are one of the best in the world
Its time for us to develop our own
ELCAN Spectre and ACOG good choices. Why not use a railed handguard so our forces can add NV or IR devices?
Galing nmn ❤
Solid ito na 🎉
Are those ACOG scopes? haven't seen one with red o-rings.
good job.more to go
Ayos 👍👍👍👍 kaya na natin makipagsabayan sa China
Astig ng M16A2 W/ACOG ayan supply sa Kasundaluhan natin pati M4 Carbine at CAR 15
Para sa Army. Marines. Navy. Airforce.
Hindi pa nila sinagad sa M16A4
Meron din sa mga video nila Gamit na Ng Philippine Navy seal(NAVSOG)@@markhovscrch4050
Keep it up, hope these products get better. In reality I have made a better rifle in my living room here in the US than those. But atleast it's a start. Seems like a early 2000s style AR.. needs more innovation, but it's a start!
Dapat sana Rapid Fire at least 300 rounds continuously para makita natin hanggang saan tatagal ang init at tibay ng barrel?
pang competition ata mga baril na yan pinakita nila sa tingin ko
Sir pwede mag Tanong San po ba ang united defense manufacturing sa Clark pampanga
Tangkilikin ang gawa natin
Ayos👍
Gawa din kayo ng mga bigger calibr mga 40mm gun pa taas
Korek
Matataas na caliber na Sniper Rifles
but somehow it’s quietly expensive for civilian to buy firearms from UDMC to we choose Armscor Torch rifle friendly budget and precise accuracy.
FINALLY ITO NA NGAYUN LANG NGYARI TO TAYO NA MISMO MAG PRODUCE NG SARILI NATING BARIL
Ngayon lang naibalik kamo Kay apo lakay libo-libong baril kung maka produced dati although nandyan Sila palagi di tulad noon na marami Silang na po produced
Armscor, Elisco, Shooters Arms, Ferfrans, Floro... filipino gunmakers have been making guns since last century
@@ryansrandomshit824 tska tinutukoy ko yung pinoy made talaga na baril yung original....
Sana may lumabas na short stock para sa urban warfare. Tapos shotguns and sniper rifles. Compact pistols din sana na pwede for civilian market. Okay pag locally made, madaling ipaliwanag pag may gustong customizations.
May AR-15 style rin ata yung UDMC, adjustable stock at tsaka short barrel (PVAR).. 5.56 calibre.
Dito kasi sa video, M16 rifle style ang design..
@ 1:49 Pistol member not holding his gun correctly. Thumb behind. You use that grip to shoot compact revolvers or old, cowboy style single-action revolvers so that you can pull hammer for each shot. You will cut your thumb with the reciprocating slide on a semi-auto and you have less control, also.
More training.
Ganda, nka pencil barrel
What are you talking about?! That barrel is even thicker than a regular M16 barrel. It looks more like a bull barrel. A pencil barrel is a skinny, lightweight barrel. You don't know what you're talking about.
@@SpyderWebbX ahh ganon ba kala ko kasi *kulang sa Pansin at aruga na Barrel* yan kagaya mo.
@@MartiFarabundoSandinistaGlad you learned something today
Bergara po ang barrel
👍👍👍👍👍👍proudly Pinoy.
the Philippines will get the Type 74 Tanks
is that true?
Yes from Japan. Japan-Philippines signed a defense pact last last month, so Japan helping Philippines to strengthen their Military capabilities.
Filipinos my own countrymen doesn't trust own engineers so no, they go run outside to buy from the outsiders.
@@markhovscrch4050 hk416, hk417(as sniper rifle) and mp7 is suitable for 21st century special forces tactics
@@sakakisak5413 is Japan will allow to sell some type 90 or type 10 tanks to the philippines?
autoloader is the best
@@imanmadani3523 XM5 and M250 LMG super Light Machine Gun
Kelan po kaya magiging available for civilian use?
Not related sa video po pero pwede bang bumili ng rifle ung non ph citizen pero former ph citizen po?
Sana may sling sila para di hawakan
Wowww gawang rp inshah allah ma modernize
good rifle video
pag sure oi..
I loved seeing the M60 as their machine gun have they switched to an FN Mag ?
I remember seeing footage of PAF soldiers fighting in Marawi using M240s.
Seems to be only issued to elite units like special ops.
Philippine Army's main SAW is the Korean K3. Some M60 is still in use as SAW.
I think they're already changing their machine guns with the light machine guns(5.56) like what Singapore did when US marines also changed their SAW(?) to IAR27(?).
I don't know if it's the PH Army or Marines, or both tho.
@@night8285 they won't do that.
As far as I understand the M60 GPMG/MMG is used as a platoon level asset while the K3 and Minimi are used as squad level assets. There's no switch that's happening.
Good job
kung ma aaprobahan po ba mag bebenta din ang UDMC ng 556 sa Civilians ?
Nag bebenta po sila sa civilians. In caliber 9mm pcc at 556. Visit mo website nila
Mag kano kaya bro@@robertcastigador911
Nice yan
Damn. Those are old-style ARs. Don't know some militaries still use this retro M16s.
We still do us the old M16A1's, but the ones shown here (to my knowledge) are modern variants using the same or similar furniture to save money. Quadrail handguards and collapsing stocks are more expensive to manufacture compared to the polymer fixed stocks and handguards.
Remington R4 is a mistake specially if they keep using Carrying handle because too broke in real life situation to afford a single Magnifier or optical sights.
tanung dyan ay yung durability ng unit yung bakal na ginamit lalo na sa barrel di lang accuracy ang dapat 99 percent dapat yung durability ganun dun in case of war eh tatagal kht ilang bwan o taon na bakbakan
Hindi questionable quality ng UDMC, matagal na ang UDMC gumagawa ng baril, infact in partnership sila ngayon sa isang South Korean defence company at nakakapag benta din sila ng baril sa US.
Ang alam ko gawa sa bergara steel ang barrel ng product nila
Dali ra ma taya.
Parang m16 parin yung muka dapat mas modern na. Old school yung design
@@Callmepapi6969 no point. Waste of money to develop a new rifle when a tried and tested design already exists.
It's not a good rifle, but it's a good start enough
Bakit yung buttstock niya same sa M16
Cheaper to manufacture, or maybe cannibalized from old units. It's only furniture, the important part is the internals.
It's basically just a domestically produced M16 clone
Tinipid, eto yung problema sa ating bansa masyadong matipid cut-cost tapos kung makayakap sa allies wagas.
You guys should make your own designed rifle. Not an AR copy. It will be way cooler.
@@miks5830 funding for R&D will be a problem, plus the added issue of production when the time comes. Aesthetics come after practicality and logistics.
Looks like AR 10 riffle
Mga congressmen dapat gumawa ng batas na uunahin muna ang supplier ng armas na locally made and owned companies bago sa labas! Second, help finance locally owned companies in research and development for self reliant defense arms.
WOW
UDMC is a known Fraud when it comes to their product. Due to bid irregularity, they are now disqualified from supplying 19,000 units of 9MM pistols to PCG. their CEO has not been honest about their products and services, and has a poor reputation in our community.
Damn shame...
Dapat noon pa kc noon mga ignorance pa ung mga nada govt Pera Pera lang sila
Country that have nukes has the leverage in country Security
Mapag katiwalaan pala pero nag R4 at T4 tayo
Hindi kasi kaya ng production capacity ng UDMC yung 50,000+ order ng PA at PMC para sa Remington R4 rifles noon.
Smaller quantities kasi ang UDMC hindi sya kagaya ng malalakihang quantity kagaya ng R4
Astig ng m16
T4 parin ako😂
AR-15 SIYAKA M4
It'll be nicer if this so called "locally made rifle" put their prices up base on the manufacturing cost and not base on what's the price of basic 5.56 on the market.. yes it's nice that we have a locally made rifles.. but the owner of this companies milking the civilian market for a price that's almost 3x more the manufacturing price of the rifle
Bergara barel.
Too bad they still use fixed buttstock 😢
That is only optional... you can buy and equip it with an adjustable butstock
Its for competition you want everthing fixed. Its thieir preferance.
Why look for Adjustable Stocks when these forces barely use Body Armor? Even U.S. Forces readying for Jungle Fighting are dropping the heavy plates common in OEF/OIF campaigns.
Nah, its makes great storage for battlefield snacks
Its just copy American M16 or M4 if the gun look like titanfall i would be amazed because half the guns in titanfall / Apex legends manufacturer in Philippines
Low quality rifles
Wdym? Most rifles are made of carbon steel????
Still kills though...
Yeah because of 'Budget' a sh*t word that enough to put limits to the budget to manufacture a sh*t
Ginawa na ng elisco yan