Love that ending message. I'm not a full time contractor, but I do get some jobs from time to time. I have an old Made in the USA Black and Decker reciprocating saw and an old Sears craftsman jig saw that still get the job done. Just because it's not the latest and greatest doesn't mean they dont have their place. I personally love old tools. They're still kicking and I've got them all for ridiculously low prices.
I have since moved up to the 20 v desalt line. But when I bought my home I bought a set of 12 v tools. I gutted and remodeled the bathroom. Refreshed the 1960’s basement, finished the 2 car garage with 12’ ceilings with numerous heavy duty wooden shelves on every wall, installed many new windows, built a wrap around porch approx 1200 square ft, and countless small projects, all with those tools. It’s amazing what the 12v tools can do. And with all that I never had to replace a battery. I used the same two that came with the kit for everything. And rarely did they die completely during a project.
I like to just make a shit load of noise I find comfort in the chaos and the fact I'm probably pissing people off with all the noise 😂. Radio on max impact gun just clapping loud as hell
The Surge is definitely my favorite impact driver, but as far as most used it’s the M12 Fuel first gen impact gun. I have a lot of impacts drivers and probably more than I need, but nothing is better than quality made tools can’t get enough of them 👍🏼
I have that exact impact that you showed at the end and coworkers give me shit about it being old but you’re right it gets the job done and it’s more durable than any modern drills I’ve seen it’s been dropped from various highs in water and mud and it still kicks ass. This video makes me even more proud of my impact
My DeWalt DCF886 has been going strong since 2014 with daily full time use. From 3" deckmates to 6" lags, it's done it all. I've also been really impressed with my bossman's Makita XTD14Z, it's got a little more torque and speed but we'll see if it can stand the test of time like my DW has
I am a Master Electrician and have been in the trades for more than 40 years. I started in the trades using single speed non reversing drills and have seen the evolution of power tools that now have sophisticated electronics. I agree that the best tools are the ones that get the job done and the the ones that you feel most confident using. I also agree that fancy tools are no substitute for skill, craftsmanship, and taking pride in your work. My favorite cordless impact driver is also my first, a brushed Milwaukee 18 volt . It feels more solidly built than my newer Milwaukee Fuel and Makita brushless models, and still performs well. Like me, it has a long history and is now reserved for my own projects.
Amen brother Vince. The best tool is the one that makes you money and has been there for you the most. Mine is a 9 year old German Metabo impact. Its a friend of mine, and rides in the side panel of my work truck. Thanks for the video sir.
I just smashed the shit out of that like button because my cheap Aldi tools have done me proud as a homeowner. I just love watching videos on premium tools and dreaming.
I have the M12 fuel, and I love it. i couldn't agree more about the compact size vs the power and it's become my go to impact driver. I also have your no.1 choice too, I've changed the brushes on it once but have had it over 5 years and it just takes no prisoners. I will run this to the bitter end. good choices 👍
I like how you mentioned towards the end that it does not matter how many functions or how good the tools are you use, if you don't care about the customer or the job. Very true!😎👍
@gs300ondub If you’re watching this channel and you’ve ever believed that it’s anything but Vince’s opinion I’m confused, did you not see his video on stackable tool storage where he raved about the packout system? Packout only excels in three categories soft tool storage, durability and it’s the most expensive. Definitely NOT the best stackable tool solution. We tune in because we like the community, tools and Vince’s I would be friends with, and beers with charisma.
@Chris Vince says that he pays for the tools out of his own pocket. Do you have any proof that he has been given these tools for free? Are you calling him a liar?
I guess I can relate to that.... I have almost every dewalt impact from my beat to hell dcf885 brushed 1/4in that I bought USED several years ago... It got me so hooked I got the 887 and 890 too, and wound up with one of their atomic hammer drills too in a package deal... Which I didn't even need for work (automotive) but it's awesome around the house, same with the 885 and 887 and when you really need some ass I have the 884 and 899 impacts as well... As well as some 6ah and 5ah XR batteries.... But out of all of it. I tend to love their brushed stuff.... It's so simple. I have a 20v max sawzaw I use occasionally and it always works amazing, but I buy good blades. I see no need to upgrade to the compact XR... Aside from portability. I also recently ordered a 2nd gen 20v weed eater (the first brushless one) because I found it cheap on EBay and I've got so many big XR batteries now that it's literally cheaper than owning a gas trimmer.... I'm hooked on this 20v line... I hope they keep expanding it. With more automotive focus would be nice, some more homeowner aimed stuff would be nice too. I'm not a contractor, an atomic hammer drill works fine for me, I'd like to see that budget line expanding....
But out of all of it... I still won't get rid of the old 885, she's the original. I'm debating ordering a new clamshell and rebuild kit.... Or just seeing how long she keeps going....? Honestly I think she'll outlive the 887... It's trigger acts .... Glitchy in low sometimes.... Although It does run better now that I've taken it apart, cleaned it up and anvil swapped it with my 890 to make a 3spd 3/8 impact, and pretty much a 787...???
Damn right bro. I been a makita tool guy myself. I dabbled in wood works a lil bit in the past. Mostly industrial now. Millwright 4 life. But i must admit that Milwaukee's 1" drive impact willl be my next buy. Unless of course makita finally makes one. But great vid bro. I likes ur style. Keep it up
I’ll keep my 5 impacts. 1. Bosch PS42 my favorite 2. Bosch PS41 most money made with this (I can’t begin to tell you how many TVs I’ve hung with this) 3. Hilti SID 2-A tool most likely to be found in my hand on a commercial job site. Also my kids favorite when helping the old man build something. The only reason why I have 18 V impacts is when I am using other 18 V tools and only want to have one battery platform on me. 4. Bosch IDH182 for when I’m also running my rotary hammer, portable bandsaw and or circular saw Normally in commercial locations 5. DeWalt DCF888 for when I am running my DCD 996. Almost exclusively used on ruff-ins in wooden construction.
I received a 20v max dewalt drill driver as a gift for Christmas so I’m interested in a dewalt impact driver 20v max for household stuff assembling items and repairs around the house that require more than a drill driver
at first i thought you were joking about the first one but youre absolutely right. im a first year electrical apprentice and i was always into the latest and greatest new tools. but when i realized that its all about the skill of the tradesman vs the tool. i only started focusing on tools that would only help me improve my craft and directed my focus more towards being skilled at the craft. great vid and keep up the great.work.
Hmm, wow, lemme see...1. Favorite impact driver- Makita 3400 rpm xdt13 2. Tool I've made the most money with- Tapeworm brand drywall finishing set. Power tool would be the Dewalt 1/2 inch drive, keyed chuck, DW235G for mud mixing. Cheap, dependable, powerful, compact, and variable speed. 3. How many jobs completed- thousands. Glad to see Makita make the list! Always awesome seeing your reviews, Vince. #verycoolgang. Thanks and God bless! 😁👍✌
The ending message was so true that was my favorite part of the video. I outperform others at work with my m12 over their 18 volt tools its the operator
demogorgin e I have impact driver and 1 drill Milwaukee I bought 2007 and still working 🤣, and I have 1 dewalt impact and 1 drill de Walt 3 years and are Good too , I work in a body shop and use the drill impact to much to take out all size bolts, usually 10 and 12 14 , 15 more than other , we re 5 people in the shop and everybody use te drills 🤣,
Hi love you videos keep it up! Need help choosing a impact driver which one would you recommend from the list below? Many Thanks Makita DTD152Z Makita DTD152 Dewalt DCF887M1 Dewalt DCF809M2 Dewalt DCF888D2B
Came here for Milwaukee fan fare, but got some knowledge. Screw the list (pun intended) that speech was worth watching. I’ve spent too much money on tools thinking it was going to make me get better faster, and all it was get good tools stolen at job sites.
Damn go Milwaukee, I love it! For me my favorites are the Milwaukee M18 FUEL Surge, the Ridgid Gen5x Stealth Force, it's a shame they discontinued it, and the Milwaukee M12 FUEL Surge.
My favorite power tool is my dewalt xr dcd785 it's like 4 years old but it's done most things in my house built and put together sheds and drilled through masonry that's why I always take that drill anywhere I need to if a job needs doing
my new Flex is pretty sweet,like my Dewalt and Makita ones as well.Not a milwaukee guy,i bought and expensive corded hammer drill years ago and it died after first use,never a fan since that day.replaced it with a Dewalt hammer drill and it still works great 30 years later
Vince... I would like your opinion on the Porter Cable 20V tools... I started with their simple impact driver and have been building my kit of their 20V tools... The reason I have gone with PC over other brands is that this is the first set of cordless tools that I've owned where the battery just lasts and lasts. And if I have a battery sitting for even up to 6 months without use, I throw it in a tool and its still fully charged after all that time. Also... Can't beat the price.
😂 I like that! It’s my no 1 because it made me a lot of money... to buy more drills! That means my no 1 is the m12 gen 1! I’ve been using it for the last 8 years.... and still goes strong!
I agree with the M12 Driver, I bought a Gen 1 when Home Depot had them on sale 2 Christmas ago for $99 right when the gen 2s came out. I tend to grab it over my m18 drivers most of the time for quick jobs. love the video thanks vince
Vince, for a professional contractor i am supprised at your immense lack of drills and drivers, I would suggest you have at least two, since two is one and one is none. I am willing to donate an impact driver to you so that when your impact driver breaks you will have a spare :)
Have you ever tried craftsman 19.2 volt impact driver or the new 29volt impact driver? I’m a loyal Craftsman tool person it is from my Dads tool gospel.
@@likeaboss882 I can't say enough good about them. I was in HD yesterday, the Ryobi hammer drill was right next to the the m12 hammer drill. It was comical how much bigger it was with a 4ah battery on it. Reality though as a DIYer almost any brands tools would work for me. I have a whole bunch of Ryobi tools I'm very happy with
Love your videos. Quick question, I have to anchor an ATM down to the ground on concrete with regular 4" volts using the corresponding socket. What drill driver do you recommend for the job?
You're #1 driver is my only driver. It never fails, it doesn't have all of the bells and whistles, and it didn't cost me a fortune. I use it on almost every job I do, and it hasn't failed me once in 10 years.
As an auto tech my favorite impact is the Milwaukee M12 Fuel. Made me a lot of money. And here is how you know you really love a tool.... If that tool grew legs and walked away I would immediately replace it with the same thing that very day. Not trying a different brand at all. There are very VERY few tools I could say that about.
That's true, the test of how good a tool really is, how long it lasts. Doesn't matter how many bells and whistles something has if it gives up after a year.
My favorite would be I only have 3 lol 1. Makita TD171 (because of the power and multiple drive modes) 2.Milwaukee M18 fuel (of it’s super high power) 3.Milwaukee M12 fuel (same reason you explained on your video)
Hey Vince. I have been thinking about an impact driver for a while and I feel this video came at just the right time for me :) . I keep getting drawn to the 3/8 stubby impact considering its a compact 12V and powerful tool , and I was wondering what your opinion would be using it as an impact driver using the Milwaukee 3/8 impact hex adapter. It would become a two in one tool for me i.e an Impact wrench cum impact driver. Thanks!
So would you say the Milwaukee Gen 3 is a better driver than the Surge? I just bought the Surge still in the box I’ll go exchange it for the Gen 3. Is it worth it?
Man, I watch these videos, and wish I had a need for all these badass tools. However, I don't, so I stick to the less expensive tools. Black & Decker is kicking ass for me. Keep up the great videos.
What's up cuz and the very cool gang Hope thereby doing good on this slick Friday can't wait for tool test rock Have you ever tested the impacts with self tappers into metal If not I would really like to see that I wanna see which one can stand up it really puts the hurt on That tool
My favorite is the m12. So far it's made me the most money and for being your number 2, I know I made a great choice. I had a craftsman and that was my first and I learned a lot and what I wanted in a newer tool. But to me I have a special place just for that tool. I still have it, it works and it's made me plenty of money.
Not gonna lie I bought the cheap end of the m18 line with the hammer drill and impact combo I wasn’t even expecting to hear that a normal m18 tool but for 1st place it makes me happy
Thats what im talking about no.1 should be reliability. Before id buy something i want it to be reliable and moneys worth. Good review. Thats what i wanna here its reliable.
Vince please review Ingersoll Rand W5110 and compare to Milwaukee Fuel 18V. Ingersoll Rand has been the industry standard pneumatic tools for machine shops and auto repair. Not sure how long Ingersoll Rand has been in the battery operated tool market, buth the W5110 has the looks, style, and pedigree to make it perhaps the greatest 18V impact driver in the world. Comes with a premium price which may very well reflect superior design, performance, engineering, ergonomics and bragging rights !
This is good for me! Just jumped ship from Makita to Milwaukee this week, well just the combi drill at the moment. Was having to buy a new combi drill every year with my Makita as the chuck kept getting stuck and kept getting metal flex getting spat out the back. Soooo let’s see how the gem 3 goes and if good will be getting the impact
My favorite cordless tools are a toss up between my 2763 Milwaukee 1/2” impact, or my 2554 Milwaukee 3/8” stubby. 90% of what I work on I grab the stubby and it rips stuff apart at 100ftlbs or more. But for when that just isn’t enough you can grab the big dog 1/2” impact and it’ll either come loose or break lol
I'm a Makita guy just because is not as much $ as Milwaukee , I have Makita tools over 10 years old and still use them every day so I'm happy with Makita tools.
i've gotta Makita TD171 to replace my old brushed impact but i still find myself going back to the old one for smaller jobs manly with screws in drywall as the TD171 is just too balls to the wall angry....
im 100% agree with you. that older (the #1) Milwaukee is the best one. I have it and 100% agree with you on your ranking. the new Milwaukee impact drivers (gen 2&3) are like a toy compare to the old one. plus they have the collet problem but this one no problem what so ever.
Are they phasing out porter cable?i bought their brushless impact and drill ,recip,hammer drill etc...just trying to see i cant find any info but all i see is craftsman.thanks.
Got a four piece 20v brushless set with bag, 2 batteries, charger, swivel 20v max flashlight, brushless impact and hammer drills and the 4 1/2” circular saw on clearance in Cartersville Georgia today for $300
Would you b willing to list the tools like the sawzall drill impact circular saw grinder.etc.by what brand u wud own of each like do u like the dewalt grinders but the Milwaukee saw.zall all.battery of course if u dont mind
Minorca Home Solutions Yep, come in handy doing electrical work, HVAC, & a lot of other things....😊 Also like that I can carry one (or both) in my pouch or tool bag.......
The Makita impact was my first impact when I worked at Home Depot. All the other employees had Dewalts and I was rocking the Makita.i run Dewalt today but Makita is underrated.
![เปิดใจ "อาจารย์เบียร์ คนตื่นธรรม" อดีตเคยสุดทุกทาง ถ้าใช้หนี้หมดไปบวชแน่ l [Nickynachat]](http://i.ytimg.com/vi/IxeE0xVhy08/mqdefault.jpg)
this should just be named top 5 Milwaukee impact drivers
Lol and one Makita. I guess that can make me proud as a guy subscribed to the Makita platform.
5
4
Was thinking the same 😅🤣
Fr 😂😂
Love that ending message. I'm not a full time contractor, but I do get some jobs from time to time. I have an old Made in the USA Black and Decker reciprocating saw and an old Sears craftsman jig saw that still get the job done. Just because it's not the latest and greatest doesn't mean they dont have their place. I personally love old tools. They're still kicking and I've got them all for ridiculously low prices.
I have since moved up to the 20 v desalt line. But when I bought my home I bought a set of 12 v tools. I gutted and remodeled the bathroom. Refreshed the 1960’s basement, finished the 2 car garage with 12’ ceilings with numerous heavy duty wooden shelves on every wall, installed many new windows, built a wrap around porch approx 1200 square ft, and countless small projects, all with those tools. It’s amazing what the 12v tools can do. And with all that I never had to replace a battery. I used the same two that came with the kit for everything. And rarely did they die completely during a project.
Usually where I am working I only want LOUD tools! Stops all the dumb questions from entering my head!
😂😂
Agree 💯%
I like to just make a shit load of noise I find comfort in the chaos and the fact I'm probably pissing people off with all the noise 😂. Radio on max impact gun just clapping loud as hell
Not when you work 26 hours a day like this shit talker lol🤔
Lol same
The Surge is definitely my favorite impact driver, but as far as most used it’s the M12 Fuel first gen impact gun. I have a lot of impacts drivers and probably more than I need, but nothing is better than quality made tools can’t get enough of them 👍🏼
I have that exact impact that you showed at the end and coworkers give me shit about it being old but you’re right it gets the job done and it’s more durable than any modern drills I’ve seen it’s been dropped from various highs in water and mud and it still kicks ass. This video makes me even more proud of my impact
My DeWalt DCF886 has been going strong since 2014 with daily full time use. From 3" deckmates to 6" lags, it's done it all. I've also been really impressed with my bossman's Makita XTD14Z, it's got a little more torque and speed but we'll see if it can stand the test of time like my DW has
I am a Master Electrician and have been in the trades for more than 40 years. I started in the trades using single speed non reversing drills and have seen the evolution of power tools that now have sophisticated electronics. I agree that the best tools are the ones that get the job done and the the ones that you feel most confident using. I also agree that fancy tools are no substitute for skill, craftsmanship, and taking pride in your work.
My favorite cordless impact driver is also my first, a brushed Milwaukee 18 volt . It feels more solidly built than my newer Milwaukee Fuel and Makita brushless models, and still performs well. Like me, it has a long history and is now reserved for my own projects.
My fave tool is the gen 2 m12 impact. Been on a couple hundred houses by now and that tool has served me well! 2nd year electrician apprentice
Amen brother Vince. The best tool is the one that makes you money and has been there for you the most. Mine is a 9 year old German Metabo impact. Its a friend of mine, and rides in the side panel of my work truck. Thanks for the video sir.
Always nice to have old tools that has been battling with you 👍
@@WEALRO True Dat Wealro !!! 👊
I just smashed the shit out of that like button because my cheap Aldi tools have done me proud as a homeowner. I just love watching videos on premium tools and dreaming.
I have the M12 fuel, and I love it. i couldn't agree more about the compact size vs the power and it's become my go to impact driver. I also have your no.1 choice too, I've changed the brushes on it once but have had it over 5 years and it just takes no prisoners. I will run this to the bitter end. good choices 👍
I like how you mentioned towards the end that it does not matter how many functions or how good the tools are you use, if you don't care about the customer or the job. Very true!😎👍
I still got mine from 9 years ago , and retired them to the homestead garage 👍 great job Vince
Change the title to "my top five favorite impact driver in the world", vince.
@gs300ondub
If you’re watching this channel and you’ve ever believed that it’s anything but Vince’s opinion I’m confused, did you not see his video on stackable tool storage where he raved about the packout system?
Packout only excels in three categories soft tool storage, durability and it’s the most expensive.
Definitely NOT the best stackable tool solution.
We tune in because we like the community, tools and Vince’s I would be friends with, and beers with charisma.
@Chris Vince says that he pays for the tools out of his own pocket. Do you have any proof that he has been given these tools for free? Are you calling him a liar?
@@thetruth5210 what are you even talking about? All I'm saying is that the title is not fitting of the video. Lmfao
Chris he buys all his tools out of pocket, the only one sponsoring him is you by watching the video
@Chris The guy with no last name and no profile picture believes other people should prove themself to him. Way to go keyboard cowboy... 🤦🏼♂️
I guess I can relate to that.... I have almost every dewalt impact from my beat to hell dcf885 brushed 1/4in that I bought USED several years ago... It got me so hooked I got the 887 and 890 too, and wound up with one of their atomic hammer drills too in a package deal... Which I didn't even need for work (automotive) but it's awesome around the house, same with the 885 and 887 and when you really need some ass I have the 884 and 899 impacts as well... As well as some 6ah and 5ah XR batteries.... But out of all of it. I tend to love their brushed stuff.... It's so simple. I have a 20v max sawzaw I use occasionally and it always works amazing, but I buy good blades. I see no need to upgrade to the compact XR... Aside from portability. I also recently ordered a 2nd gen 20v weed eater (the first brushless one) because I found it cheap on EBay and I've got so many big XR batteries now that it's literally cheaper than owning a gas trimmer.... I'm hooked on this 20v line... I hope they keep expanding it. With more automotive focus would be nice, some more homeowner aimed stuff would be nice too. I'm not a contractor, an atomic hammer drill works fine for me, I'd like to see that budget line expanding....
But out of all of it... I still won't get rid of the old 885, she's the original. I'm debating ordering a new clamshell and rebuild kit.... Or just seeing how long she keeps going....? Honestly I think she'll outlive the 887... It's trigger acts .... Glitchy in low sometimes.... Although It does run better now that I've taken it apart, cleaned it up and anvil swapped it with my 890 to make a 3spd 3/8 impact, and pretty much a 787...???
Just received 7 years good luck.
Cheers Vince. M12 Gen 2 Impact is my first so my Fav
Good vid Vince and no surprises on your top five choices. Cheers.
Thank you!
Logan yes sir I love them all too , never a issue
Damn right bro. I been a makita tool guy myself. I dabbled in wood works a lil bit in the past. Mostly industrial now. Millwright 4 life. But i must admit that Milwaukee's 1" drive impact willl be my next buy. Unless of course makita finally makes one. But great vid bro. I likes ur style. Keep it up
Once again Vince you did it! Thanks for all your help. Don’t know what I would do with out you!
Thanks Elzy!!
Liked that video! Pretty cool dude .
I’ll keep my 5 impacts.
1. Bosch PS42 my favorite
2. Bosch PS41 most money made with this (I can’t begin to tell you how many TVs I’ve hung with this)
3. Hilti SID 2-A tool most likely to be found in my hand on a commercial job site.
Also my kids favorite when helping the old man build something.
The only reason why I have 18 V impacts is when I am using other 18 V tools and only want to have one battery platform on me.
4. Bosch IDH182 for when I’m also running my rotary hammer, portable bandsaw and or circular saw
Normally in commercial locations
5. DeWalt DCF888 for when I am running my DCD 996.
Almost exclusively used on ruff-ins in wooden construction.
I received a 20v max dewalt drill driver as a gift for Christmas so I’m interested in a dewalt impact driver 20v max for household stuff assembling items and repairs around the house that require more than a drill driver
at first i thought you were joking about the first one but youre absolutely right. im a first year electrical apprentice and i was always into the latest and greatest new tools. but when i realized that its all about the skill of the tradesman vs the tool. i only started focusing on tools that would only help me improve my craft and directed my focus more towards being skilled at the craft. great vid and keep up the great.work.
Hmm, wow, lemme see...1. Favorite impact driver- Makita 3400 rpm xdt13
2. Tool I've made the most money with-
Tapeworm brand drywall finishing set. Power tool would be the Dewalt 1/2 inch drive, keyed chuck, DW235G for mud mixing. Cheap, dependable, powerful, compact, and variable speed.
3. How many jobs completed- thousands.
Glad to see Makita make the list! Always awesome seeing your reviews, Vince. #verycoolgang. Thanks and God bless! 😁👍✌
Vince top 3 fav videos I've seen ita all about pride in your work! Quality consistency and a happy customer
Love your channel!
The ending message was so true that was my favorite part of the video. I outperform others at work with my m12 over their 18 volt tools its the operator
👍
A Milwaukee commercial, cute .
You must not be following the channel he is Milwaukee biased some of his guys are dwalt guys.
Was going to say the same
Well, they're the best. Duh
Lol
I had 3 different Milwaukee impact drivers broke down on me. Got a makitaa and it whoops milwaukee ass both in performence and durability.
demogorgin e I have impact driver and 1 drill Milwaukee I bought 2007 and still working 🤣, and I have 1 dewalt impact and 1 drill de Walt 3 years and are Good too , I work in a body shop and use the drill impact to much to take out all size bolts, usually 10 and 12 14 , 15 more than other , we re 5 people in the shop and everybody use te drills 🤣,
Operator error. Milwaukee has the edge over Makita in current gen by a sizeable margin.
Yeah do you just throw them down after you use it?
@@williisaias to be fair I have a regular
Drill Driver that I barely use, and it no longer goes in reverse.
@@mdale814 try working in rain and snow couple weeks and come back and tell me how it whent, before you questioning my statement
My Craftsman C319.2 volt impact gun I had it for years and it gets the job done for me.
Hi love you videos keep it up! Need help choosing a impact driver which one would you recommend from the list below? Many Thanks
Makita DTD152Z
Makita DTD152
Dewalt DCF887M1
Dewalt DCF809M2
Dewalt DCF888D2B
My Mikata its.been going for 5 seasons building decks and porches and as you know that's heavy duty use...
Great video.
Nice Robert!
WOW that is heavy!!
I love how you have a ton of Milwaukee tools in the background lol!👍
The fact that Vince even put a Makita on the list should tell you how good they are 🤘
My uncle uses the Makita impact drivers for garage door services and installs and has had it it for five years one of the best on the market
true story
Came here for Milwaukee fan fare, but got some knowledge. Screw the list (pun intended) that speech was worth watching. I’ve spent too much money on tools thinking it was going to make me get better faster, and all it was get good tools stolen at job sites.
Subscribed. Your perfect for this gig man. Noice job.
i love your energy you bring to your channel
Damn go Milwaukee, I love it! For me my favorites are the Milwaukee M18 FUEL Surge, the Ridgid Gen5x Stealth Force, it's a shame they discontinued it, and the Milwaukee M12 FUEL Surge.
Top 5 best ever impact drivers sponsored by milwaukee! Good video tho
Only first quality video for the very cool gang, good explanations, work tips and very cool review. Thanks V.c.g. construction.
My favorite power tool is my dewalt xr dcd785 it's like 4 years old but it's done most things in my house built and put together sheds and drilled through masonry that's why I always take that drill anywhere I need to if a job needs doing
my new Flex is pretty sweet,like my Dewalt and Makita ones as well.Not a milwaukee guy,i bought and expensive corded hammer drill years ago and it died after first use,never a fan since that day.replaced it with a Dewalt hammer drill and it still works great 30 years later
Vince... I would like your opinion on the Porter Cable 20V tools... I started with their simple impact driver and have been building my kit of their 20V tools...
The reason I have gone with PC over other brands is that this is the first set of cordless tools that I've owned where the battery just lasts and lasts. And if I have a battery sitting for even up to 6 months without use, I throw it in a tool and its still fully charged after all that time. Also... Can't beat the price.
😂 I like that! It’s my no 1 because it made me a lot of money... to buy more drills! That means my no 1 is the m12 gen 1! I’ve been using it for the last 8 years.... and still goes strong!
Thank you Vince . Milwaukee . Bosch . Now Rigid. I want Makita next
Awesome list Vince!
Thanks Kronie!!
Hey Vince! What you say makes total sense! Latest technology is not the only consideration. Thanks for a common sense approach to the list. 😊
Thanks Bryan!
I agree with the M12 Driver, I bought a Gen 1 when Home Depot had them on sale 2 Christmas ago for $99 right when the gen 2s came out. I tend to grab it over my m18 drivers most of the time for quick jobs. love the video thanks vince
I love that from the thumbnail I was able to tell what all of them are
Vince, for a professional contractor i am supprised at your immense lack of drills and drivers, I would suggest you have at least two, since two is one and one is none. I am willing to donate an impact driver to you so that when your impact driver breaks you will have a spare :)
😂😂
Have you ever tried craftsman 19.2 volt impact driver or the new 29volt impact driver? I’m a loyal Craftsman tool person it is from my Dads tool gospel.
Sweet seeing my m12 take runner up. DIY home owner. Love all my m12 Fuel tools. Hackzall is awesome, even 5 3/8 circular saw works for me.
Jay thought about picking up some m12 stuff because the dewalt 12v shit is useless. The automotive tool selection is great
@@likeaboss882 I can't say enough good about them. I was in HD yesterday, the Ryobi hammer drill was right next to the the m12 hammer drill. It was comical how much bigger it was with a 4ah battery on it.
Reality though as a DIYer almost any brands tools would work for me. I have a whole bunch of Ryobi tools I'm very happy with
Love your videos. Quick question, I have to anchor an ATM down to the ground on concrete with regular 4" volts using the corresponding socket. What drill driver do you recommend for the job?
I’m surprised you’re not using epoxied in all thread and then using bolts
I appreciated when you said rotator cuff 👌
You're #1 driver is my only driver. It never fails, it doesn't have all of the bells and whistles, and it didn't cost me a fortune. I use it on almost every job I do, and it hasn't failed me once in 10 years.
Well said Vince! We always have our debates on who is the better tool brand, but in the end, it’s what gets the job done! #JustSayin
As an auto tech my favorite impact is the Milwaukee M12 Fuel. Made me a lot of money. And here is how you know you really love a tool.... If that tool grew legs and walked away I would immediately replace it with the same thing that very day. Not trying a different brand at all. There are very VERY few tools I could say that about.
I will smash the like button
Perfect list dude
That's true, the test of how good a tool really is, how long it lasts. Doesn't matter how many bells and whistles something has if it gives up after a year.
My favorite would be I only have 3 lol
1. Makita TD171 (because of the power and multiple drive modes)
2.Milwaukee M18 fuel (of it’s super high power)
3.Milwaukee M12 fuel (same reason you explained on your video)
M12 fuel surge for me 💜 love that lil thing so much. Everyone always thinks I’m stripping the shit out of screws tho cause of the sound
M12 fuel combo pack use them for assembly furniture jobs for about a year now, hasn't let me down. 😎👍
Hey Vince. I have been thinking about an impact driver for a while and I feel this video came at just the right time for me :) . I keep getting drawn to the 3/8 stubby impact considering its a compact 12V and powerful tool , and I was wondering what your opinion would be using it as an impact driver using the Milwaukee 3/8 impact hex adapter. It would become a two in one tool for me i.e an Impact wrench cum impact driver. Thanks!
So would you say the Milwaukee Gen 3 is a better driver than the Surge? I just bought the Surge still in the box I’ll go exchange it for the Gen 3. Is it worth it?
Mike watch this video : th-cam.com/video/YxOkUjX_noo/w-d-xo.html
It is not as powerful as the Gen 3 but it is much quieter and smoother. I've had a Surge for over 3 years and I love it.
Dude you should play a movie in Hollywood,thanks for the video.
Man, I watch these videos, and wish I had a need for all these badass tools. However, I don't, so I stick to the less expensive tools. Black & Decker is kicking ass for me. Keep up the great videos.
What's up cuz and the very cool gang Hope thereby doing good on this slick Friday can't wait for tool test rock Have you ever tested the impacts with self tappers into metal If not I would really like to see that I wanna see which one can stand up it really puts the hurt on That tool
My favorite is the m12. So far it's made me the most money and for being your number 2, I know I made a great choice. I had a craftsman and that was my first and I learned a lot and what I wanted in a newer tool. But to me I have a special place just for that tool. I still have it, it works and it's made me plenty of money.
Great review. It makes sense to rank the 12V Milwaukee the second.
Not gonna lie I bought the cheap end of the m18 line with the hammer drill and impact combo I wasn’t even expecting to hear that a normal m18 tool but for 1st place it makes me happy
👊🏼Keepin it Old Skoo👊🏼
Hey Vince Any thoughts on a new Rotary laser for Landscape and concrete work. I do a few driveways amd patios every season. Need a new tool
Maybe some of the #VeryCoolGang can help I haven’t used an outdoor rotary laser for sitework in years!
I love watching these videos because it's like watching the TV show Home Improvement if it was hosted by Joey from FRIENDS. Keep up the good work.
Thats what im talking about no.1 should be reliability. Before id buy something i want it to be reliable and moneys worth. Good review. Thats what i wanna here its reliable.
Vince please review Ingersoll Rand W5110 and compare to Milwaukee Fuel 18V. Ingersoll Rand has been the industry standard pneumatic tools for machine shops and auto repair. Not sure how long Ingersoll Rand has been in the battery operated tool market, buth the W5110 has the looks, style, and pedigree to make it perhaps the greatest 18V impact driver in the world. Comes with a premium price which may very well reflect superior design, performance, engineering, ergonomics and bragging rights !
This is good for me! Just jumped ship from Makita to Milwaukee this week, well just the combi drill at the moment.
Was having to buy a new combi drill every year with my Makita as the chuck kept getting stuck and kept getting metal flex getting spat out the back. Soooo let’s see how the gem 3 goes and if good will be getting the impact
My favorite cordless tools are a toss up between my 2763 Milwaukee 1/2” impact, or my 2554 Milwaukee 3/8” stubby. 90% of what I work on I grab the stubby and it rips stuff apart at 100ftlbs or more. But for when that just isn’t enough you can grab the big dog 1/2” impact and it’ll either come loose or break lol
I'm a Makita guy just because is not as much $ as Milwaukee , I have Makita tools over 10 years old and still use them every day so I'm happy with Makita tools.
i've gotta Makita TD171 to replace my old brushed impact but i still find myself going back to the old one for smaller jobs manly with screws in drywall as the TD171 is just too balls to the wall angry....
im 100% agree with you. that older (the #1) Milwaukee is the best one. I have it and 100% agree with you on your ranking. the new Milwaukee impact drivers (gen 2&3) are like a toy compare to the old one. plus they have the collet problem but this one no problem what so ever.
Totally like your attitude... Following you ...👍
Wait. I just watched a video of you bashing the collet on the Milwaukee. How’s the collet on the competitors?
Great list!
Thank you!!
Are they phasing out porter cable?i bought their brushless impact and drill ,recip,hammer drill etc...just trying to see i cant find any info but all i see is craftsman.thanks.
Got a four piece 20v brushless set with bag, 2 batteries, charger, swivel 20v max flashlight, brushless impact and hammer drills and the 4 1/2” circular saw on clearance in Cartersville Georgia today for $300
Another good video from VCG! Good job!
❤️
Hey Vince I am still rocking old humpty dumpty Milwaukee m18 brushed impact driver.
Would you b willing to list the tools like the sawzall drill impact circular saw grinder.etc.by what brand u wud own of each like do u like the dewalt grinders but the Milwaukee saw.zall all.battery of course if u dont mind
Love my M12 tools too, & are the ones I grab first. I can do 90%-95% of the tasks I need to get done, with my M12 tools.
Me too aepek I get most jobs done with them 👍
Minorca Home Solutions Yep, come in handy doing electrical work, HVAC, & a lot of other things....😊
Also like that I can carry one (or both) in my pouch or tool bag.......
The Makita impact was my first impact when I worked at Home Depot. All the other employees had Dewalts and I was rocking the Makita.i run Dewalt today but Makita is underrated.
showing pride with your work what matters most.
I have the m12 drill and impact set non fuel. Have used them everyday for the last year and a half. Never an issue even drilling through I beams
Great choice Vince almost what I'd pick bar 3 lol😄🤜🤛👍
Thank you for this video
Thanks for watching and leaving a comment!!
So thought you were going Dewalt DCD 887 mate 😉🤷♂️nice one brother
Wow the #1 impact driver has B e e n around. Beat up scratched, scard, and keep driving.
Awesome videos ! Mexico here!
Thank you!! HOLA