Very useful video. Thanks a lot. Can you please demonstrate the easiest way to open the side cover. I found it a bit weird because it doesn't fit properly on one go. I saw that even the Honda workshop guys were struggling to get it closed on one go.
Hi sir!?...Great Video as always..A question...What do you think about the NEW CB350 rs?..Do you think the Launches of the two bikes(CB 350 and CB 350 rs) were pretty close and do you think, one would be disappointed since the rs is essentially an Upgrade..
It depends on the perspective you look at it. Its not an upgrade in any aspect, they have removed the navigation and Bluetooth connectivity in 350RS. Everything else renains same except for the design and looks . I would still go with highness cb350 for its simplicity and the retro classic style with oodles of chrome parts used in it.
Good to know the details of fuse and how to remove and replace them. Sir can you please let us know from where you got your additional lights installed with the Harness wire and proper installations without voiding the bike guarantee. I meant which outlet whom we can trust in getting installation of the additional lighting and the proper wiring. The 10w lights demo was really amazing
Lights, you can buy from bikenbiker(Wilson garden) if you are in Bangalore. Professional Installation: Done at a Garage called "Gear Motorcycles" in Wilson garden, right below bikenbiker store: 600/-
Sir I have Highness 2023, purchased on first July.. I have installed fog light with 6 pin relay. I opened headlight dome and found 3 wires without any connections, one of which was red means +ve. I took supply for switch to operate relay and fog lights' upper/dipper were working fine with 3 way switch. But inadvertently that +ve taken for switch, touched the body and now not showing current now. Bike is operating fine though. Kindly reply what happened? Is there any fuse which has been blown off and needs replacement? If yes, where is it's location? Fog lights are still working if switch wire is joined directly to the battery.
Great video again... I have nothing to comment about the content of the video... :) but one small comment about how it is made. I think if you use a mobile holder for recording rather than holding the phone/camera in your hands.. It will be easier for you too...
So there are 3 fuses for abs. Can u please tell us more about what is each one's purpose and how to switch off the abs ? Thanx for this informative video. 😅
Yes, there is no switch as such to turn off ABS, if any of the fuses are removed ABS will not work as expected or all you know it might turn OFF the ABS.
Good information about fuse system. Maddog wiring harness has one white wire for ignition point. Where that white wire will be connected in cb350? Location of that point. Thank you.
Great content as usual. Could you please look into wiring additional horn unit from the pro variant in one of your future videos? I think that would be of great use for the highways. Traditional dual horn units have a high and a low tone unit, out of the low tone unit is the one missing in our dlx variant. I am unable to find if we could directly install this low tone unit in parallel with the existing high tone unit by using a splitter, or will there be a need to install a new relay and fuse in a separate harness to accommodate for the almost doubling of the power load on the stock wiring harness.
My rs 350 stopped in the middle of the road and three days later wouldn’t start at the Honda service station, something to do with electrical apparently the service boys working on it but still no success, any thoughts!? Thanks
Hi Sir , I have quary about Hiness 350 CC Battery , three days back my bike battary was die & I Kept new battery also but Bike was not started still , so let tell me what is the problem ..
I buyer cb 350 rs a month ago and it’s showing problem like glowing traction control light and abs light in digital meter and also both are not working and I have checked fuses and all fueses under seats are ok ✅ please help me to solve problem
A very good video 😊,,,and im so curious to know can highness get upgrades for RS coz both the bikes share the same chases and hardwares ,,i have an idea to swap the tail section and handle bars from RS to highness ,,highness is definitely a unique bike ,,in case the youngsters who got highness may now like to do this mod ,,,does this works or not ,,pls make a video about this topic ,,
Hello sir, I have a query I work abroad and stay away for 8 to 10 months in a year. I do not want my bikes battery to die for not using it at all. I have heard that removing the battery main connector would keep the battery in good condition and after i come and connect it it would good as new. Would You kindly share your opinion advice on this topic please? I really need to know as I love my beast.
@@motovin77 thank u sir. Can you mention which one is the main connector? And also according to your advice we have to change the battery every 3 years?
@@NEELADRIAUDDYA You have to disconnect the main terminals connected to the battery and wrap then with insulation tape. Typically life of a battery is 3 years, if dead, you will need to replace
Sir really very useful your videos thanks a lot
This video really helped me alot. Thank You
Very informative video sir....lot of thanks for educating us ...
Very useful video. Thanks a lot. Can you please demonstrate the easiest way to open the side cover. I found it a bit weird because it doesn't fit properly on one go. I saw that even the Honda workshop guys were struggling to get it closed on one go.
Sure..
Hi sir!?...Great Video as always..A question...What do you think about the NEW CB350 rs?..Do you think the Launches of the two bikes(CB 350 and CB 350 rs) were pretty close and do you think, one would be disappointed since the rs is essentially an Upgrade..
It depends on the perspective you look at it. Its not an upgrade in any aspect, they have removed the navigation and Bluetooth connectivity in 350RS. Everything else renains same except for the design and looks . I would still go with highness cb350 for its simplicity and the retro classic style with oodles of chrome parts used in it.
Good to know the details of fuse and how to remove and replace them. Sir can you please let us know from where you got your additional lights installed with the Harness wire and proper installations without voiding the bike guarantee. I meant which outlet whom we can trust in getting installation of the additional lighting and the proper wiring. The 10w lights demo was really amazing
Lights, you can buy from bikenbiker(Wilson garden) if you are in Bangalore.
Professional Installation: Done at a Garage called "Gear Motorcycles" in Wilson garden, right below bikenbiker store: 600/-
Very informative video. I received fuse remover in my tool kit. You can check in your kit too.
Sir I have Highness 2023, purchased on first July.. I have installed fog light with 6 pin relay. I opened headlight dome and found 3 wires without any connections, one of which was red means +ve. I took supply for switch to operate relay and fog lights' upper/dipper were working fine with 3 way switch. But inadvertently that +ve taken for switch, touched the body and now not showing current now. Bike is operating fine though. Kindly reply what happened? Is there any fuse which has been blown off and needs replacement? If yes, where is it's location?
Fog lights are still working if switch wire is joined directly to the battery.
Great video again... I have nothing to comment about the content of the video... :) but one small comment about how it is made.
I think if you use a mobile holder for recording rather than holding the phone/camera in your hands.. It will be easier for you too...
So there are 3 fuses for abs. Can u please tell us more about what is each one's purpose and how to switch off the abs ? Thanx for this informative video. 😅
Yes, there is no switch as such to turn off ABS, if any of the fuses are removed ABS will not work as expected or all you know it might turn OFF the ABS.
Good information about fuse system. Maddog wiring harness has one white wire for ignition point. Where that white wire will be connected in cb350? Location of that point. Thank you.
Can u do a video on the box contents and it's uses which u keep for bike..
Thanks for the valuable information. Is main fuse and ignition is same?
Correct✅
Great content as usual. Could you please look into wiring additional horn unit from the pro variant in one of your future videos? I think that would be of great use for the highways. Traditional dual horn units have a high and a low tone unit, out of the low tone unit is the one missing in our dlx variant. I am unable to find if we could directly install this low tone unit in parallel with the existing high tone unit by using a splitter, or will there be a need to install a new relay and fuse in a separate harness to accommodate for the almost doubling of the power load on the stock wiring harness.
My rs 350 stopped in the middle of the road and three days later wouldn’t start at the Honda service station, something to do with electrical apparently the service boys working on it but still
no success, any thoughts!? Thanks
Hi Sir , I have quary about Hiness 350 CC Battery , three days back my bike battary was die & I Kept new battery also but Bike was not started still , so let tell me what is the problem ..
My bikes USB Charging port is not working what could be issue...
There is good space under seat honda could have opted for locked seat instead of screw.
I buyer cb 350 rs a month ago and it’s showing problem like glowing traction control light and abs light in digital meter and also both are not working and I have checked fuses and all fueses under seats are ok ✅ please help me to solve problem
gr8 content... bad camera angles you should work on it
Absolutely 👍 working on it
A very good video 😊,,,and im so curious to know can highness get upgrades for RS coz both the bikes share the same chases and hardwares ,,i have an idea to swap the tail section and handle bars from RS to highness ,,highness is definitely a unique bike ,,in case the youngsters who got highness may now like to do this mod ,,,does this works or not ,,pls make a video about this topic ,,
Sure will make a video on RS once it arrives in Bangalore.
@@motovin77 thank you ,,and also don't forget to know whether the mod can be suitable or not ,,,im waiting for your reply 😀🔥
@@srinandhan8783 absolutely, I am also looking to get some parts from RS for my bike
@@motovin77 Keep a look out for the bash plate. Looks like a direct fit from the photos.
How much all fuses?
Hello sir, I have a query I work abroad and stay away for 8 to 10 months in a year. I do not want my bikes battery to die for not using it at all. I have heard that removing the battery main connector would keep the battery in good condition and after i come and connect it it would good as new. Would You kindly share your opinion advice on this topic please? I really need to know as I love my beast.
Yes Sir, 8-10 months of non usage, best to disconnect the terminals. However life of battery is around 3 years plus minus, even if not it use.
@@motovin77 thank u sir. Can you mention which one is the main connector? And also according to your advice we have to change the battery every 3 years?
@@NEELADRIAUDDYA You have to disconnect the main terminals connected to the battery and wrap then with insulation tape.
Typically life of a battery is 3 years, if dead, you will need to replace
From where we can get cb350 brand new fuses to keep it as spare?
You will get it local spare parts shop or Amazon but will end up buying whole box....
@@motovin77 is it universal fuse or we just need to search it as cb350 fuses?
@@sayujraghavan8024 universal, just to be sure show them the size.
@@motovin77 link for fuses plz
What is the allen key size so we can have one spare
5 millimetre
Yes it's 5MM