Alta 15% Supercharger Pulley Reduction - 2005 Mini Cooper S R53 Video 2
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- This is the second part in a series of modifications and maintenance to my 2005 Mini Cooper S. I hope you enjoy it!
Supercharger pulley replacement process: • How to Install Perform...
Part 1: Intro and Maintenance • 2005 Mini Cooper S R53...
Part 2: Alta 15% Supercharger Pulley Reduction • Alta 15% Supercharger ...
Part 3: DDM Works Cold Air Intake • DDM Works Cold Air Int...
Part 4: Accident Repair • Accident Repair, polyu...
Part 5: Boost gauge, tranny fluid, slave cylinder • Boost gauge, oil chang...
Part 6: Decals and Plastidip wheels • Decals and Plastidip -...
Part 7: One ball exhaust mod • One Ball Exhaust Mod C...
Video breakdown:
Pulley replacement
ALTA AMP-ENG-200V2 Supercharger Pulley (Newer version) amzn.to/1r5z434
Tensioner remover tool: amzn.to/3Pt6iIS
Gates K060535 Multi V-Groove Belt amzn.to/1r5zfvd
Alternate belt: Alta Reduction Supercharger Pulley Belt Mini Cooper (S) 02+ amzn.to/1r5z2Iv
Spark plug replacement
6988 NGK Laser Iridium Spark Plug amzn.to/1r5yQZY
Test drive comparison
Lmao “ closed course “
E
Donde compraste esa polea y esas bujías, cuánto t costaron ambas cosas amigo ??
Hello Tito, you can buy them from Amazon for about $130 for both. Thank you.
ALTA AMP-ENG-200V2 Supercharger Pulley (Newer version) amzn.to/1r5z434
6988 NGK Laser Iridium Spark Plug amzn.to/1r5yQZY
Need to put aftermarket tensioner guide on. If belt breaks. Tensioner will hit crankshaft and screw everything up.
Thanks for the advice!
Do I have to take of the tensioner?
From what I recall you do not have to take the tensioner off, but compress the spring to remove the belt. I followed this video th-cam.com/video/KpQuHeJLFHk/w-d-xo.html
I've got a kav 17%reduced pully ramair induction kit on mine the thing is fkin mental
more info your pulley upgrade please..big difference? lows ? high end?
What was the boost increase difference?
I don't remember the exact psi change, but acceleration was noticeably quicker
Totally different subject. What's the size of your rearview mirror flat or convex? Sound good by the way. Interesting you went from the quarter panel instead of the front repair mode. Much quicker less to remove looked faster.
I'm not sure what is the exact rear view mirror size. The mirror is flat with the garage door opener buttons on the bottom left, and it came with the car. It looks identical to the product here www.pelicanparts.com/techarticles/MINI_R56/100-INTERIOR-Interior_Mirror_Replacement/100-INTERIOR-Interior_Mirror_Replacement.htm
I had terrible belt slippage on my car I bought with this pulley. It also had the alta tensioner..it only made 11lb of boost now its dropped to 5lb. So I need to adjust the tensioner or get a new belt
What the peak boost u get on the alta pulley??
yes engine mounts are oil damped and do fail causing tell tale oil staining easy to replace and cheap too
awesome video which belt do you change the auxiliary belt or the timing belt thanks
Hello, it was the Gates K060535 Serpentine Belt
where you got the eyes for stick under the hood? :-)
I think I got them from ebay. Here's a link for a two I found on ebay and amazon.
www.ebay.com/itm/261183628808?hash=item3ccfc1e608:g:hiQAAOSwTj9fHxy3
amzn.to/3gcneQJ
you never show job on Mini Cooper ,why
Sorry, this R53 series was just documenting what I did with the car, and not the process on how to do it. My future videos walk through the repair/modification processes.
Way to fast in the street Sir, lol. Did you upgrade your antifreeze tank to an aluminium one?
I did not. I sold the car to my friend's dad.
Hello, did you install that Chrono Package on the dash yourself or was it already in when you purchased the car? I've been looking for one myself but cannot seem to find any.
It was already in there when I bought it. Thanks for the question.
Did you have to left the motor in order to gain access to the pulley? If so, how difficult was this process?
It has been a while. I think I had to support the engine with a jack and loosen an engine mount. The process wasn't too difficult if you have the right tools. This guy shows you how to do it. th-cam.com/video/KpQuHeJLFHk/w-d-xo.html
Did u lift the engine?
I think I supported it with a jack and loosened a motor mount. This guy records the entire process. th-cam.com/video/KpQuHeJLFHk/w-d-xo.html
I've seen other vids where the engine is lifted for easier access to the pulley. How difficult was it to do this job without lifting the motor?
Albanks173
He's changed the wrong pully
Equaliser no he hasn’t you dip stick
How did u get the tensioner removing tool?
I think I bought it from ebay. They sell them on Amazon too amzn.to/3Pt6iIS
Can you still put the aftermarket pulley/belt without that?
@@roymilla6636 I recall having to use that tool to loosen the tensioner to remove the pulley. Perhaps you can use a different tool to loosen it like a long metal rod, or wood
@ColinLeung oh ok thanks for the tips man big help
@@roymilla6636 For sure. Let us know how it goes
man i keep breaking belts on my 2006 s with a 17% pully
From what I've heard not totally sure but if installed improperly it can do that. One mod I've been debating doing myself or taking to a dealership. the tolerance on the reinstall is fairly low from what I've read on the internet here's something that may help for you to check your installed pulley.
Slide your new Pulley Hub all the way onto the supercharger shaft and place the pulley body on top of it. Push the two pieces of the pulley together until they are mated lightly. Bottom out your pulley body to the end of the shaft and then pull it back .020-.025 away from the end of the shaft. This important step insures that the body tightens on to the hub and not the other way around.
Check your strut towers. They look like they're starting to mushroom.
Thanks. I put on adjustable camber plates, and eventually sold the car.
Hello, did you purchase that pulley removal tool or rent it? If you bought it, and still have it, can I buy it off of you or rent it from you? Thanks, Zach.
Hello, I bought it from another user on the northamericanmotoring site. After I used it, I sold it for about as much as I paid. I hope this helps. Thanks.
Did you have to jack the engine up to get at it ??
It has been a few years since I did this, so I don't remember. If anything, I had to jack the engine up a few inches with a 2x4 under the oil pan, which isn't hard to do.
Hi Colin, do you still have the SC pulley tool and drive belt tool that I can borrow ? thx.
Sorry, I sold the tool a while back. You can rent it from Detroittuned, or buy one from a memeber on the Northamericanmotoring forums and sell it back for about the price that you paid.
I see, thanks for the information. how you doing? want to have a R53 meet somewhere in SF ?
Any problem getting smog in the Bay Area? I need help
Not if your car has the stock emissions parts on, and passes the I/M test on a OBD2 reader.
Colin Leung hey man thank you very much can’t wait for my 15%pulley :))!!!
No remap needed for correct fueling ?
Many people run the car without a map after doing this mod. I'm sure it'll perform better with a custom tune.
@@ColinLeung modern ecu's do compensate well but if funds available a custom tune for the new conditions to get the most of the work done would be spot on 😊
Is it me or does this look like a 2nd Gen. I have 1st Gen, no speedo above the column. I would love it if it came on the R53. Is this not a R53? Lil help here. Best car I have ever driven and bought so I am serious about info. I just want more power just like everyone else. ???
He has the optional gauge pack (oil pressure, temp, and one other) in the middle where the speedo usually is. If you got that pack, the speedo was moved next to the tach from factory :)
Neverless, still going to instill a better %pulley. I will probably install a better supercharger and intercooler while the hood is up. Ppl need their pizzas delivered faster. :) No job lets you drive a car for delivery and enjoy it at the same time. Hince, thus, reason I deliver pizza. Own your world, drive with passion, and perfect your craft. I don't make them, I can deliver them.
Looks like your right upper engine mount is leaking. You might want to check that out soon. Common problem on these cars.
Thank you for bringing that up. I'll take a look at it. :)
Engine Mount??? Leaking????? Ummmm, ok so i am new to minis but modified and raced cars most of my adult life, but with respect since when does rubber leak? Honestly i mean no offence, i'm curious! and would love to know at what point of the video did you identify this leaking mount? IE: 1:16 I have a Mini, and the Upper Engine mount is pretty noticeable as its quite large! Please let us know :)
+Josh Brookes Well the 1st Gen MINIS' engine mounts are oil filled, the top Right to be specific @0:28 you can see what looks like black tar on the engine support bar. Typical MINI problem, same as coolant tank leaking, these are just 2 of the many many common leaks this car has. I've had one for a while now, an 06 R53 JCW. Ive rebuilt this thing twice, one for all leaks and gaskets and the other for oil starvation causing rod knock. So I know this car inside and out. I've done everything you can think of to this car. Any questions, ask away. Ive probably done it or am doing it.
@@brians9141 I know this is old, but given the problems you've had to fix, would you still recommend buying a 05-06 Mini Cooper S today? I couldn't afford them before, but they're cheaper now and I'm more knowledgeable about cars and have tools so I could work on it myself.
@@pictishwolf7 did you buy one? I have a 05 r53 with 17% pully and lightweight 0%lightweight crank pulley. Thing rips!!!!
Alta ...ugh...ughlta
flashing closed course do not attempt doesn't make it so.
Never any need to change super charger oil