Great video! I had full front PPF and ceramic coating on the rest of the car a few months ago. It's so much easier to keep my car looking clean all the time. All I do is power rinse regularly with deionized water and dry with a blower - completely touchless, Then, I hand wash with soap every two weeks. The hydrophobic properties of the PPF and ceramic coating are the key to why it's so easy to keep my car looking great all the time.
I was there! Yours was the first FL5 Type R I saw in person, absolutely loved it. I've got a 11th gen civic and the wide fenders really make the car perfect. Congrats! Keep up the great work.
Awesome video Joe!! The car looks amazing!! Keep up the phenomenal content!! I have enjoyed your channel for years and it’s gets better and better!! 👍🏼
Raiti is 💯 percent worth it, I did it all to my Kona N and i have no regrets. Also get the wheels ceramic coated, it's a breeze to clean them. Congrats
I would like updates on how often you need to replace PPF. Like if you get any rock chips that are too deep for it to self-heal or when dirt gets up under the edges.
Good choice Joe! 100% protect what you work hard for. I mention in my videos but I always fully ppf my cars. Any surface that’s painted, gets corrected and protected with film as soon as I can. Often times before I even take delivery. The films are becoming more expensive but as long as the job is not worth over 10%+ of the cars value, it’s a must have!
Nice job! I did this to my 2022 Outback when I got it fresh off the lot. The saddest part was this freezing winter a rock was able to pierce and rip the PPF. I was extremely disappointed when I saw it chip the film. The PPF is strong only in warmer climates vinyl and PPF become brittle like plastic in the freezing cold.
🇺🇸 *This video is a NICE change of pace* !! *GREAT idea to GET the extra paint protection* !! *It's worth the extra time and money to protect the investment in your gorgeous Civic Type R* !! *FAB video Joe and Steven* !! #RaitisRides 🇺🇸
Love it! I'm a process guy and fascinated by watching folks do good work. Big believe in ceramic, both our vehicles have been dipped :o) Awesome episode Team Raiti!!!
I believe you should spend the extra money to get even more paint protection. I’ve seen on forums newer Honda paints are already fading so definitely a smart move to it
@@mattmekhaeil agreed you can thank progressive Barack Obama’s EPA for that move. That’s why I like Trump. He deregulated the crap out of things in 5 years. All the stupid rules to help the planet, gone! We already lost most V8’s and V6’s because Obama demanded a 52 mpg Cafe standard. And we are paying the consequences for his stupid butt.
This was an interesting & informative video. Never knew about ppf & all the detailing that goes behind this. I’m curious to know how much this normally goes for.
This likely cost him almost $1500. There’s so much that goes into it… the PPF and ceramic materials themselves, but as you saw, the paint correct with wheels off takes a lot of labor. Additionally, I’m sure they detailed the interior. You could get this all done for way less elsewhere, but they wouldn’t be putting in the same effort. This is the best investment I’ve made on my R and wish I knew about it sooner so I could have done it to previous cars.
@@MuffinMan0521 Just the PPF xPel sheets are just under $1500 for the front bumper, hood, fenders, sills and mirrors. Add in a few hundred for the ceramic coating and paint cleaning product. Then another thousand for labor and that's low balling it. Just a ceramic coat and paint correction can cost $1000. Here we're likely talking closer to $4k if he was paying street price (which he's not).
Finally part 2!! Yes get ceramic done with the clear stuff to go over it... my cars a 21 ND front bumper ND hood is ruined now I gotta get sprayed over winter... get it done as soon as u leave.. I did get it ceramic coated 2 weeks ago so stop more damage tho
The paint correction and ceramic coats are an amazing thing to do. Makes a huge difference. But I still can't wrap my head around putting a plastic film on your beautiful paint job and then ceramic coating that. You will have to replace the PPF eventually and then you'll have to reapply the ceramic again. Seems like a waste. Plus I worry about the long term damage that it can make on a car. Maybe its better now but I was looking at a used 2005 car and the PPF was cracked so badly that my detail guy said the car will probably need to be repainted...
I have 22’ Si in Blazing Orange. Full front end PPF using Expel self healing materials. +Door cups, Rear bumber trim, side mirrors. And whole vehicle coated using Gyeon Flash (10 year coating) As 1st car owner, think ima headed in the right direction 👍
You should do this more often with the type R and get different goodies with it (wheels, tune, etc). It will also boost your viewers as well to get that 1 million subscribers! Anyways great video as always!
Joe you read my mind with this video! I just recently purchased a 23’ GT2 Kia Stinger in ceramic silver and wanted to get the same services done. I live and Tampa so as soon as I watched this video I contacted Presidential Detailing for a quote, this shop looks legit and I know you do your research. Another video that I think a lot of us would be interested in is how do you go about washing your type r? A lot of people say that car washes have become much safer for your paint but I don’t trust it 100% when it comes to swirls, scratches, water spots, etc. If you hand wash your car or have it done professionally, how often do you do that? I think that would be very informative. Loving the vids, thank you!
People need to know how much this detail cost. It is certainly not for the faint of heart. I had this type of detail done to my Tesla and it is worth every penny.
Agreed. Is Rhodium white out yet? Maybe on the CX-5 or Miata? I don’t know. I only know it’s offered on the CX-90 coming out later in 2023. I like it from what I’ve seen online. I have a new CX-5 but it’s just the snowflake white Pearl but I had this procedure done as well.
When i first looked at my car at the dealership, the paint looked near perfect. But after they cleaned it i saw some swirly marks so was a little salty they didn't do it properly lol
I bought an 11th Gen Sonic Gray Pearl Sport Touring Hatch (2022) delivered 11/17/2021. From 10-15 Dec 2021 had an XPEL Ultimate PLUS PPF bra, ceramic coating Fusion Plus done and they threw in window tint (four side windows and the rear hatch window) for free. A brand new car is when you "get 'er done" and never look back! 😄😄😎
i had my '21 sonic grey 2.0 sport accord paint corrected, ppf'd and ceramic coated a week after purchase over 2yrs ago. i pay $425mo. for parking (nyc) and use a car cover, and it didn't cost anywhere near the sticker price of a type r.. let alone those draconian dealer markups. the owner determines the worth!
@Joe Raiti from Raiti’s Rides. I watched… and learned, literally! Wow, you did great showing & describing the process so even an enthusiast novice like me could understand.
even if you put ceramic coating on the brake rotors, I'm sure they'll wear off in 1/100 of a second when you apply the brakes... unless it's some new ceramic coating that the air force spent 100 million to develop the new 6th gen fighter jets.
I truly respect and appreciate those of you who go to these lengths to protect your investment. It looks absolutely stunning! However, I received a few quotes for these services and I was floored! Paint correction couldn't be determined until they saw it in person. Pre-cut PPF (full body) was $7,500, bulk was $9,000. Ceramic coat (over PPF) is $1,995 while over paint is $1,495. Now, this makes me question if it's worth it or not considering these services last 5-10 years. Personally, I'll take my chances and have it fixed and repainted when the time comes, it will still cost far less than $10k. Unless you know how to do it all yourself, then it's a no-brainer to have it all done. I would only do ceramic coating. Love your FL5 Joe!
its 4k for basically everything he did, i got a quots from them my self so its not that bad for the quality and what your protecting idk who your talkling to 10k tf
@@MotorSport_Nick Bulletproof Auto Spa, big name and located only a few miles away from me. I'm in the LA area, so everything is more expensive. If I can get all of that done for $4k, I wouldn't argue it, but I'd be questioning the quality of the products and work if I received substantially higher quotes elsewhere. TBH, I'm planning to leave Cali because it's simply too expensive to live here. Here's one simple example. Note, that paint correction isn't included yet, I also requested window tint which was $1,700 for all of the windows (including the windshield). That, I know is too expensive because I had Llumar IRX installed on all of the windows on my Tesla and that was $1,000. Xpel is just slightly more expensive than Llumar, maybe $50-100 more, not $700. I just completely gave up if the prices were anywhere near the $10-12k service costs, even $8k is out of the question for me.
@@kayashimz get tf out of that garbage state, come to Florida where they actually want u to save money and stay alive. Yea everything that he did was about 6k total bc he did alot, but these guys tbh look like the most qualified to do the job in fl ngl, they work on high end sports cars and I can see the quality of their work is there, but yea 10k is crazy
Congrats on the Type R Noticed no paint correction on the area covered by the PPF. The PPF will hide any minor swirls. Do you know what product they sprayed on the wheels and calipers? Ty
Awesome video, Joe, but I'm gonna have to zonk you for saying the word moist though. 😂 Congrats on the Type R. This generation is so much better looking than the last one.
I only put ppf on cars from a certain value (way above that of the civic) cause it costs a lot and is not 100% fool proof. You can end up with damaged paint real quick and then need to replace the ppf in that area as well ending up with pretty much pointless ppf as the car now had to be repainted. Talking out of experience, my Civic got ceramic coating but no ppf so it's easy to wash and has a nice deep shine.
It’s a shame you pay so much for a new vehicle and it comes damaged with swirl marks. That comes mostly from not washing car correctly……or drying. Ever hear of a ammonyc ? They have great products……my fav is called “hydrate”. You spray on micro fiber towel when drying car……works great ! Smart move Joe ! 👍
I’ve owned two Hondas and the paint is crap. Had a recall on both. I got ceramic coating on my Bullitt mustang and I loved it. On my next car I’ll do the PPF. Great video. Not sure if there is a company that does this. First ceramic coating wasn’t very good.
Ouch. Just called their shop to get a quote kist for full PPF on a 2024 Civic Type R and it's $8500!!! Not including ceramic coating. Yikes. 😱. That better come with 2 life time warranties. Holy smokes Batman!
Hey Joe, just wondering why you let the dealer wash your car before delivery?? When I buy a new car I insist on NO WASHING to prevent any swirl marks.. and I take it straight to my detailer who peels off all the shipping plastic himself before doing all his work.. it's a great way to make his job easier!
@@RaitisRides Understood.. Where I bought my last 3 cars, I even noticed swirl marks on the vehicles in their showroom, so I guess most people aren't too concerned about them.. but like you, I care about detail.. so I figured it's best to avoid their car washers.. or car damagers! 😆
Great change of pace episode. This kind of thing and detailing are my passion.
I think if you're buying a car that's special to you, investing in paint protection is a smart move.
I like the way you think David!
If it fits the budget 👌
Great video! I had full front PPF and ceramic coating on the rest of the car a few months ago. It's so much easier to keep my car looking clean all the time. All I do is power rinse regularly with deionized water and dry with a blower - completely touchless, Then, I hand wash with soap every two weeks. The hydrophobic properties of the PPF and ceramic coating are the key to why it's so easy to keep my car looking great all the time.
Took my type r there too and got PPF and ceramic coating. Great group of guys.
I was there! Yours was the first FL5 Type R I saw in person, absolutely loved it. I've got a 11th gen civic and the wide fenders really make the car perfect. Congrats! Keep up the great work.
Oh wow that is really awesome. Thank you for saying that! I really appreciate that.
I really enjoyed this video. It’s so magical to see a car’s finish transformed like that.
Awesome video Joe!! The car looks amazing!! Keep up the phenomenal content!! I have enjoyed your channel for years and it’s gets better and better!! 👍🏼
That means the world Shaun!
@@RaitisRides anytime my brother!!
Raiti is 💯 percent worth it, I did it all to my Kona N and i have no regrets. Also get the wheels ceramic coated, it's a breeze to clean them.
Congrats
You are so very right!
I would like updates on how often you need to replace PPF. Like if you get any rock chips that are too deep for it to self-heal or when dirt gets up under the edges.
my PPF comes with a 10 year warranty that would cover edge dirt/peel
rock chips aren't covered but mines haven't had any deep chips after 5 years
Hey Joe, I have 2 of your most recent videos, back to back in my history section. And there is a big difference in the way your Civic looks! WOW!!🤯
Thanks for saying that Bennie!
Good choice Joe! 100% protect what you work hard for. I mention in my videos but I always fully ppf my cars. Any surface that’s painted, gets corrected and protected with film as soon as I can. Often times before I even take delivery. The films are becoming more expensive but as long as the job is not worth over 10%+ of the cars value, it’s a must have!
Thanks for the great info and for the support!
That car is F-ing awesome! Must be a joy to drive! Congrats! You deserve it!
Great insight video Joe! Loved it! Thanks for sharing it with us! This Type R is lucky to be in your hands. 👍👍💯💯
That’s really awesome of you to say
@@ericB3444 Boop
So sleek.
Honda needs to make their cars all look cool like this.
I agree with you
They are. This is their new design language.
Nice job! I did this to my 2022 Outback when I got it fresh off the lot. The saddest part was this freezing winter a rock was able to pierce and rip the PPF. I was extremely disappointed when I saw it chip the film. The PPF is strong only in warmer climates vinyl and PPF become brittle like plastic in the freezing cold.
🇺🇸 *This video is a NICE change of pace* !! *GREAT idea to GET the extra paint protection* !! *It's worth the extra time and money to protect the investment in your gorgeous Civic Type R* !! *FAB video Joe and Steven* !! #RaitisRides 🇺🇸
Love it! I'm a process guy and fascinated by watching folks do good work. Big believe in ceramic, both our vehicles have been dipped :o) Awesome episode Team Raiti!!!
I believe you should spend the extra money to get even more paint protection. I’ve seen on forums newer Honda paints are already fading so definitely a smart move to it
It’s really good insurance when you think about it.
Yea Honda removed lead from their paint some time ago
@@2004cyrus they should add it back again because paint shouldn't fade on a new car. That's absurd
@@mattmekhaeil agreed you can thank progressive Barack Obama’s EPA for that move. That’s why I like Trump. He deregulated the crap out of things in 5 years. All the stupid rules to help the planet, gone! We already lost most V8’s and V6’s because Obama demanded a 52 mpg Cafe standard. And we are paying the consequences for his stupid butt.
Can’t wait for your exhaust install. Great video.
This was an interesting & informative video. Never knew about ppf & all the detailing that goes behind this. I’m curious to know how much this normally goes for.
This likely cost him almost $1500. There’s so much that goes into it… the PPF and ceramic materials themselves, but as you saw, the paint correct with wheels off takes a lot of labor. Additionally, I’m sure they detailed the interior. You could get this all done for way less elsewhere, but they wouldn’t be putting in the same effort. This is the best investment I’ve made on my R and wish I knew about it sooner so I could have done it to previous cars.
@@MuffinMan0521 Just the PPF xPel sheets are just under $1500 for the front bumper, hood, fenders, sills and mirrors. Add in a few hundred for the ceramic coating and paint cleaning product. Then another thousand for labor and that's low balling it. Just a ceramic coat and paint correction can cost $1000. Here we're likely talking closer to $4k if he was paying street price (which he's not).
Finally part 2!! Yes get ceramic done with the clear stuff to go over it... my cars a 21 ND front bumper ND hood is ruined now I gotta get sprayed over winter... get it done as soon as u leave.. I did get it ceramic coated 2 weeks ago so stop more damage tho
The paint correction and ceramic coats are an amazing thing to do. Makes a huge difference. But I still can't wrap my head around putting a plastic film on your beautiful paint job and then ceramic coating that. You will have to replace the PPF eventually and then you'll have to reapply the ceramic again. Seems like a waste. Plus I worry about the long term damage that it can make on a car. Maybe its better now but I was looking at a used 2005 car and the PPF was cracked so badly that my detail guy said the car will probably need to be repainted...
That Championship White needs the best protection from the elements!
You are so very right!
that CTR must be just a blast to drive. and so clean now!
You better believe it!
Amazing the way Billy's Type R looks.
He is very good at what he does!
@@RaitisRides
Thank you for showing us how these things get done.
Awesome video Joe! I know if I buy a brand new car I will definitely look into ppf
Thanks so much!
Very good choice getting PPF and ceramic coating Bravo 👏
On the road to 1 million subscribers. Good job!
Thanks for being on the journey with me.
I have 22’ Si in Blazing Orange. Full front end PPF using Expel self healing materials. +Door cups, Rear bumber trim, side mirrors. And whole vehicle coated using Gyeon Flash (10 year coating) As 1st car owner, think ima headed in the right direction 👍
You are so very right
Those guys are awesome. Took my car over there. No regrets
You should do this more often with the type R and get different goodies with it (wheels, tune, etc). It will also boost your viewers as well to get that 1 million subscribers! Anyways great video as always!
Love how detailed this video is. Really great to see the process!
Hey dekiary I got a new SGP FL5 in the LA area you know of any detailers that wanna do a video with it
Joe you read my mind with this video! I just recently purchased a 23’ GT2 Kia Stinger in ceramic silver and wanted to get the same services done. I live and Tampa so as soon as I watched this video I contacted Presidential Detailing for a quote, this shop looks legit and I know you do your research. Another video that I think a lot of us would be interested in is how do you go about washing your type r? A lot of people say that car washes have become much safer for your paint but I don’t trust it 100% when it comes to swirls, scratches, water spots, etc. If you hand wash your car or have it done professionally, how often do you do that? I think that would be very informative. Loving the vids, thank you!
Awesome and educational video Joe! You’re the best!😊
It worths it. If you already spent some money for the car the least you should do is protect it.
I feel the same exact way
As a Honda Massive Fan: love your civic type r!
Thanks man that is really awesome of you to you!
People need to know how much this detail cost. It is certainly not for the faint of heart. I had this type of detail done to my Tesla and it is worth every penny.
for anyone that has a soul red Mazda or their new Rhodium white; I definitely recommend doing this as those paints are very thin.
Thanks for sharing that experience
Agreed. Is Rhodium white out yet? Maybe on the CX-5 or Miata? I don’t know. I only know it’s offered on the CX-90 coming out later in 2023. I like it from what I’ve seen online. I have a new CX-5 but it’s just the snowflake white Pearl but I had this procedure done as well.
@@2004cyrus yes Rhodium white is out, I have it on my 23 CX-5 Turbo
@@jeanpierre6484 that’s fantastic! I haven’t seen one yet. Congrats.
YES I LOVE PROJECTS LIKE THIS AWESOME!
That fantastic Tom
Looks good Joe! keep up the great work!
Awesome behind the scenes content! Looking forward to the next video!
When i first looked at my car at the dealership, the paint looked near perfect. But after they cleaned it i saw some swirly marks so was a little salty they didn't do it properly lol
I wanna see this man take over his career 💯💯
Thanks brother!
I bought an 11th Gen Sonic Gray Pearl Sport Touring Hatch (2022) delivered 11/17/2021. From 10-15 Dec 2021 had an XPEL Ultimate PLUS PPF bra, ceramic coating Fusion Plus done and they threw in window tint (four side windows and the rear hatch window) for free. A brand new car is when you "get 'er done" and never look back! 😄😄😎
Great video Joe!!!
Joe Raiti, thanks for bringing us on your journey brother!
You are so very welcome Sam!
Amazing detail work 👍🏼😎
I totally agree with you!
The amount of satisfaction of hearing you say, *MY Type R* so happy you chose to be on Team Honda🙌
i had my '21 sonic grey 2.0 sport accord paint corrected, ppf'd and ceramic coated a week after purchase over 2yrs ago. i pay $425mo. for parking (nyc) and use a car cover, and it didn't cost anywhere near the sticker price of a type r.. let alone those draconian dealer markups. the owner determines the worth!
@Joe Raiti from Raiti’s Rides. I watched… and learned, literally! Wow, you did great showing & describing the process so even an enthusiast novice like me could understand.
Thanks Jeff that means so much!
Raiti absolutely loves the Type R
even if you put ceramic coating on the brake rotors, I'm sure they'll wear off in 1/100 of a second when you apply the brakes... unless it's some new ceramic coating that the air force spent 100 million to develop the new 6th gen fighter jets.
Thanks fir your input
I truly respect and appreciate those of you who go to these lengths to protect your investment. It looks absolutely stunning! However, I received a few quotes for these services and I was floored! Paint correction couldn't be determined until they saw it in person. Pre-cut PPF (full body) was $7,500, bulk was $9,000. Ceramic coat (over PPF) is $1,995 while over paint is $1,495. Now, this makes me question if it's worth it or not considering these services last 5-10 years. Personally, I'll take my chances and have it fixed and repainted when the time comes, it will still cost far less than $10k. Unless you know how to do it all yourself, then it's a no-brainer to have it all done. I would only do ceramic coating. Love your FL5 Joe!
its 4k for basically everything he did, i got a quots from them my self so its not that bad for the quality and what your protecting idk who your talkling to 10k tf
@@MotorSport_Nick Bulletproof Auto Spa, big name and located only a few miles away from me. I'm in the LA area, so everything is more expensive. If I can get all of that done for $4k, I wouldn't argue it, but I'd be questioning the quality of the products and work if I received substantially higher quotes elsewhere. TBH, I'm planning to leave Cali because it's simply too expensive to live here. Here's one simple example. Note, that paint correction isn't included yet, I also requested window tint which was $1,700 for all of the windows (including the windshield). That, I know is too expensive because I had Llumar IRX installed on all of the windows on my Tesla and that was $1,000. Xpel is just slightly more expensive than Llumar, maybe $50-100 more, not $700. I just completely gave up if the prices were anywhere near the $10-12k service costs, even $8k is out of the question for me.
@@kayashimz get tf out of that garbage state, come to Florida where they actually want u to save money and stay alive. Yea everything that he did was about 6k total bc he did alot, but these guys tbh look like the most qualified to do the job in fl ngl, they work on high end sports cars and I can see the quality of their work is there, but yea 10k is crazy
Can you legally put on some external winshield protection?
Congrats on the Type R
Noticed no paint correction on the area covered by the PPF. The PPF will hide any minor swirls.
Do you know what product they sprayed on the wheels and calipers? Ty
I will find out
Awesome video, Joe, but I'm gonna have to zonk you for saying the word moist though. 😂 Congrats on the Type R. This generation is so much better looking than the last one.
They did a great job with this type r my favorite part of the car are the wheels they are beautiful...
I only put ppf on cars from a certain value (way above that of the civic) cause it costs a lot and is not 100% fool proof.
You can end up with damaged paint real quick and then need to replace the ppf in that area as well ending up with pretty much pointless ppf as the car now had to be repainted.
Talking out of experience, my Civic got ceramic coating but no ppf so it's easy to wash and has a nice deep shine.
awesome step to step video. enjoyed it
Yes it's worth it! I would do this!
I would say yes def because Hondas keep of their value protecting the paint will give you even more equity later down the road when you sell it
Very good way to look at it
Car looks amazing Joe!!
I am liking the car behind the CTR while on the lift, at the 21:50 mark!
It’s a shame you pay so much for a new vehicle and it comes damaged with swirl marks. That comes mostly from not washing car correctly……or drying. Ever hear of a ammonyc ? They have great products……my fav is called “hydrate”. You spray on micro fiber towel when drying car……works great !
Smart move Joe ! 👍
Good call Tom! Thanks for sharing that intel!
Good stuff. I need to get ceramic coating on my car. Got mine a month ago a Honda Civic Sport and Platinum White but it does get dirty easily.
This will be my dream car to buy one Joe.
Dream big!
This car and the GR should not be even talked about on any media platform! Buy anything, including cars in savage yards and you come out away ahead!
Very interesting!
I’ve owned two Hondas and the paint is crap. Had a recall on both. I got ceramic coating on my Bullitt mustang and I loved it. On my next car I’ll do the PPF. Great video. Not sure if there is a company that does this. First ceramic coating wasn’t very good.
I ordered those gloss Type R pillars and corner trims for my Sport Touring. They were sealed from the factory, no swirls.
Good call. I’m glad they were shipped well
I like what you doing on your special car Joey I'll do the same one day when I get my self a new type R 😎 salute all the way from South Africa 🇿🇦🇿🇦😎
Great informative video! I’m having Xpell installed on my new Stingray next week. Not cheap, but worth it!
Such a beautiful car.
I really appreciate you saying that
@@RaitisRides You’re welcome Joe
PPF for a $100,000 Carrera. Naked for a $45,000 Civic Type R.
Lovin it 💯💯💯
Thanks for letting me share it with you Adam!
I love it Joe and Lori keep up the good work and I love the video 👏 👍 💯💯
We appreciate you so much Dominic.
Nobody better than Presidential Detailing and AutoPaintGuard to protect your investment!
Are you going mod your FL5, lower and full bolt on's
Ouch. Just called their shop to get a quote kist for full PPF on a 2024 Civic Type R and it's $8500!!! Not including ceramic coating. Yikes. 😱. That better come with 2 life time warranties. Holy smokes Batman!
the front honda emblem is known to get rock chips, and if hit hard enough a star from the rock. Happen to me going 130MPH
Beautiful job.
I’m so glad that you are digging it
Smart choice Joe beautiful car
I’m doing mine myself I’m still working on the polishing part! I haven’t got that finished yet…lol
Slow & steady wins the race.
Looks like a good $5-6k worth of detailing, PPF is awesome though, even more on a black or white car.
I like the tint on your Civic Type R, what percentage have you got?
Of Course it's Worth Protecting Now it Needs 5 Percent Tint and 18 inch Rays Engineering TE-37 Finished in White
I like the way you think Chris!
@@RaitisRides White With White Wheels is The official Type R Look 💯
Very interesting video. Would it be possible to do a vehicle update of your current garage.
Hey Joe, just wondering why you let the dealer wash your car before delivery?? When I buy a new car I insist on NO WASHING to prevent any swirl marks.. and I take it straight to my detailer who peels off all the shipping plastic himself before doing all his work.. it's a great way to make his job easier!
Because it had roll on goo for shipping protection
@@RaitisRides Understood..
Where I bought my last 3 cars, I even noticed swirl marks on the vehicles in their showroom, so I guess most people aren't too concerned about them.. but like you, I care about detail.. so I figured it's best to avoid their car washers.. or car damagers! 😆
I've had my 21 Accord Sport SE for over a year. Actually about 16 months now. Is it too late for me to have this done to my Accord?
Not at all.
@@RaitisRides thanks!
does it affect all the sensors on the car, like sonar, etc
Not at all. Great question
OUCH!!!! That is at least close to $8,000 dollars to PPF and ceramic coating
Hey Joe I have a white 2018 STI with an aftermarket clear bra that doesn’t look great. Is just a heat gun needed to peel it off?
Ouch as a detailer washing your car in full sunny day hurts me
The rest of the job looks clean tho
Just the first step
@@martinelantraratedn agreed
Am I'm Cali where can I go for my type R and what's the cost
Nice detailing guys, but lots work to achieve productivity.
Great job.
First I'm seeing PPF done
Very cool!
PPF will protect the finish from road debris and make washing a breeze
Excellent choice 👌
i dont think i would spend the 3k+ for paint protection. Id use it for a downpayment on my next car in 3 years , and get a new paint job /car
the paint correction is worked before the ppf
This is true!
Do you still have the mustang the 350 R
Awesome civic man😎