My three stage vacuum booster arrived. I tried it out and I was blown away what a third 3 stage vacuum could do for carpet cleaning. I am impressed. Glad I saw your video.
I hurt my back this week tugging a portable extractor up a flight of stairs. Saw your vid, ordered the vac booster already. At 66 years old and not weighing much more than my portable I have to admit that I won't be pulling a machine upstairs anymore, so this booster will keep me cleaning carpets for some time to come. Thanks for the info.
I run a 3 stage vacuum that factory came in my sandia portable with 3 stage vacuum added on top from steambrite an man its got strong suction. I like it. Just trying to figure out a way now to have just a little heat inline?? Any ideas. I dont wanna spend $1k on a mytee inline heater
My process was simple. Since I used two cords on the machine, one for the booster and one for the machine itself. I already have two cords available and while I’m in the house, running hoses and setting up and pre-spraying. I dropped two 1500 W bucket heaters in the tank. Utilizing the two cords that were already there. When I finish prepping the home, I would come out unplugged the two bucket heaters plug in the machine and the booster. By that time, the water was piping hot. Leave the bucket heaters in the tank as they will keep the water pretty warm. All the other heaters out there in line heaters, etc. never worked for me. And I didn’t want to get a diesel heat and complicate the whole process, and truthfully, cold water along with good agitation may be using a brush as good as hot water ever used
@@procarpetcleaning nice thank you. So evenwhen u kept the bucket heaters in the feed water tank in ur portable, it kept the water warm the whole time of cleaning?
It was just a basic model. I don’t really remember. I’m not using it any longer as I switched to low moisture Carpet Cleaning. It was a standard dual vacuum system with 100 psi pump. I converted it to 220 psi pump and put one dual stage, vacuum and triple stage vacuum in it as well as the booster.
Hey could anyone help me im trying to figure something out I need help. I’ve made a setup using a small 5-gallon Yeti bucket with two motors, replacing a larger 45-gallon barrel. This setup boosts the vacuum for my Mytee S300h, which is perfect for my upholstery cleaning due to its small size and portability. Although the vacuum is powerful and the bucket holds well, when I connect the Yeti bucket’s hose to the Mytee S300h’s waste tank hole, combining three motors for more suction, I notice that the suction isn’t as strong as expected when I use the 8-foot vacuum hose with the upholstery tool. Without the hose the succion is so much more powerful I also made sure everything was perfectly sealed with hose so could it be because the air is restricted from the 8400P mytee tool ? Or the size of my vacuum hose ? Please help
I have a prochem Cheyenne portable which don't have the the opening with the lid I want to add a booster were is the best place to put it for water lift on the exhaust of the portable or on the wastes tank wich i have to make a whole and install a pipe for the booster hose i need to run 125 ft of line
You could put a elbow out from the exhaust port and hook in series instead of parallel. Still works great. I have two old school box extractors from 1992 that I link together that way. Both two duel vacs so it gives me 4 dual vacs in line (series). Two standard 15amp plugs and your good to go! 👍🏻
My three stage vacuum booster arrived. I tried it out and I was blown away what a third 3 stage vacuum could do for carpet cleaning. I am impressed. Glad I saw your video.
See, now you know what I’ve been talking about right 😊. 🔥🔥✔️
I hurt my back this week tugging a portable extractor up a flight of stairs. Saw your vid, ordered the vac booster already. At 66 years old and not weighing much more than my portable I have to admit that I won't be pulling a machine upstairs anymore, so this booster will keep me cleaning carpets for some time to come. Thanks for the info.
Sweet. Glad you found the channel
You’re the reason why I bought a steambrite vacuum booster. My order will arrive this week. I’m excited for more power to clean.
You will love it.
Great cleaning, great chocolate milk!
How do you heat the water?
What size vacuum hose are you using? 2 inch or 1.5 inch?
1.5 pool hose for light weight
I run a 3 stage vacuum that factory came in my sandia portable with 3 stage vacuum added on top from steambrite an man its got strong suction. I like it. Just trying to figure out a way now to have just a little heat inline?? Any ideas. I dont wanna spend $1k on a mytee inline heater
My process was simple. Since I used two cords on the machine, one for the booster and one for the machine itself. I already have two cords available and while I’m in the house, running hoses and setting up and pre-spraying. I dropped two 1500 W bucket heaters in the tank. Utilizing the two cords that were already there. When I finish prepping the home, I would come out unplugged the two bucket heaters plug in the machine and the booster. By that time, the water was piping hot. Leave the bucket heaters in the tank as they will keep the water pretty warm. All the other heaters out there in line heaters, etc. never worked for me. And I didn’t want to get a diesel heat and complicate the whole process, and truthfully, cold water along with good agitation may be using a brush as good as hot water ever used
@@procarpetcleaning nice thank you. So evenwhen u kept the bucket heaters in the feed water tank in ur portable, it kept the water warm the whole time of cleaning?
What type of Tornado portable extractor is that one?
It was just a basic model. I don’t really remember. I’m not using it any longer as I switched to low moisture Carpet Cleaning. It was a standard dual vacuum system with 100 psi pump. I converted it to 220 psi pump and put one dual stage, vacuum and triple stage vacuum in it as well as the booster.
When do you decide to do hot water extraction? And low moister cleaning ? Also can low moister cleaning be done in all cases?
facebook.com/groups/padlife/?ref=share
I just purchased the steambrite 3 stage vacuum. How long is it taking for carpet to dry? I currently am using a rotovac handwand.
6 hours
Love it! Can I use that booster on any portable? Or maybe custom build one?
I would custom build one. Check out “ the all American Mack” TH-cam channel. Find his electric truck mount videos on build out.
Hey could anyone help me im trying to figure something out I need help. I’ve made a setup using a small 5-gallon Yeti bucket with two motors, replacing a larger 45-gallon barrel. This setup boosts the vacuum for my Mytee S300h, which is perfect for my upholstery cleaning due to its small size and portability. Although the vacuum is powerful and the bucket holds well, when I connect the Yeti bucket’s hose to the Mytee S300h’s waste tank hole, combining three motors for more suction, I notice that the suction isn’t as strong as expected when I use the 8-foot vacuum hose with the upholstery tool. Without the hose the succion is so much more powerful I also made sure everything was perfectly sealed with hose so could it be because the air is restricted from the 8400P mytee tool ? Or the size of my vacuum hose ? Please help
Join Padlife group on Facebook. Lots of help there
What kind of cord are you using to hang your hose on the hand rail?
Usually just one of those gear straps from Home Depot. (Flexible tie strap)
wow im now seeing this. i have a mytee 2000CS. 2 stage would this booster work if yes can you advise on how to mak one?
Steambrite makes it
Chocolate milk/ waste water 😍🔥💪💯
Can you run up to 200 ft of hose and not loose suction? I over heard you run about 100 ft and do just fine with your booster.
I saw another video. You mentioned 100 ft
My 3 stage vacuum booster arrived today. I tested it and wow it pulls.
I have a prochem Cheyenne portable which don't have the the opening with the lid I want to add a booster were is the best place to put it for water lift on the exhaust of the portable or on the wastes tank wich i have to make a whole and install a pipe for the booster hose i need to run 125 ft of line
You could put a elbow out from the exhaust port and hook in series instead of parallel. Still works great. I have two old school box extractors from 1992 that I link together that way. Both two duel vacs so it gives me 4 dual vacs in line (series). Two standard 15amp plugs and your good to go! 👍🏻
Boy that really has some sucking sound
What makes a vacuum “2 stage”? What makes a vacuum “3 stage”?
The number of vacuum blades stacked. Google it for better understanding 👍🏻
I just copy it and build one my self.
Sweet- it doesn’t seem to complicated and I bet it was way cheaper then $550 👍🏻👍🏻