Mountain Top shutter+ Wildtrak sailplane INSTALLED! So, is it any good?!

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ส.ค. 2023
  • #mountaintop #wildtrak #sailplane #ranger #ford #ute #rollershutter
    Finally fitted up the sailplane and the roller shutter. In this clip I go through my thoughts on the new accessories.
    Please don't forget to like the videos and subscribe to the channel to see more custom camper and 4x4 content.
    @ / @gtgarageaus
    Check out my IG here. Follow/ like if anything is interesting or useful-
    gee_tee_garage
    No product sponsorship exists.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 4

  • @chrisduckworth2022
    @chrisduckworth2022 2 หลายเดือนก่อน +1

    With the brackets that bolt the roller shutter to the tub, what are the tub side brackets bolted to on the tub ?

    • @gtgarageaus
      @gtgarageaus  2 หลายเดือนก่อน +1

      Hi, thanks for watching. I'll try my best to answer. The plastic part of the sailplane (capping) is bolted to the tub in several locations. That then bolts to the shutter, then the shutter edges have the groove that the rack bolts slide into. If that makes sense?
      I WOULD NOT rely on the factory mounting points to take the weight of anything too hefty on the rack though. The shutter definitely needs some fabricated supports underneath the in the tub to be able to take a lot of weight. These can be purchased pre made, but i'll just fabricate some myself.

    • @chrisduckworth2022
      @chrisduckworth2022 2 หลายเดือนก่อน +1

      @@gtgarageaus yeah, I have been told the same thing.
      I have however put 100kg or so on the tub rails when collecting firewood. That definitely exceeds the roller shutter weight rating from both Ford/Rhino Rack(25kg max) and Mountain Top (75 kg).
      I wish I could post a photo on here to better show the brackets I'm talking about. But they are the ones bolted to the underside on the roller shutter track and clearly visible when the roller shutter is open. There are 2 on each side that are about the same distance apart from a centreline taken vertically from the centre tie down point.
      I'm looking at brackets that bolt into the centre tie down point and then bolt onto the 2 brackets I mentioned, giving a 250KG weight limit on the roller shutter.

    • @gtgarageaus
      @gtgarageaus  2 หลายเดือนก่อน +1

      I just don't trust it at the moment on mine. Until i make the supports anyway. Its the dynamic load that im worried about. My rooftop tent is about 70kg, and that weight swaying around up high bothers me.