The switch will not last long. A power transistor would be much better. A diode would be needed to prevent transients from damaging the transistor. Variable speed can be achieved with a simple multivibrator. Regards, Engineer from India.
Nice work dude. I wish I had observed more closely as I followed the dimensions you wrote of the side and top plates you made not realising you changed it in the working model.
Dunno if anyone gives a shit but if you're stoned like me during the covid times you can watch all of the latest movies on InstaFlixxer. I've been streaming with my brother recently :)
El problema no es el motor es la energía barata para generar el movimiento. Cuánta energía consume y cuánta entrega. Con la mínima contaminación posible.
Tem que mostrar a fonte de energia. Até onde sei, não tem como gerar energia para isso, e mais com um único cilindro. Se fosse dois ou mais, as chances seria mais favorável. Mas gostei da engenharia, criação boa, dá para ter uma noção.
Hey i am just askinn will it work like if i put geared moter on the crankshaft and it generates power so can i connect the motor to ti the coil and make it run infinite ♾️ reply if yes or no
I also think any ferrous material would probably work, as the magnetic field from the solenoid would attract the material. Maybe by starting with something that already has poles the force is greater?
Está quase no ponto o uso de solenoide, no entanto ainda pode acontecer que o imã se desmagnetize aos poucos... Melhor seria se fosse atraído somente um dos polos.
USING THE DRILL TO SPIN YOUR COPPER WAS AWESOME
th-cam.com/video/K59lLp5oXLA/w-d-xo.html.
@@sagillat-1512 ?
Yes
you can use a motor too
You got some great skills man.. feel the perfection in every steps, which is difficult to find in many youtube diy videos.. Keep it up..
deez nuts
The switch will not last long. A power transistor would be much better. A diode would be needed to prevent transients from damaging the transistor. Variable speed can be achieved with a simple multivibrator. Regards, Engineer from India.
just make your own switch
Well that was cool and enjoyable to watch! Thanks
The music will say it all!
Hahaha...
Nice work dude. I wish I had observed more closely as I followed the dimensions you wrote of the side and top plates you made not realising you changed it in the working model.
Your creation is easy to understand
Thank you
Great
You make a solonoied engin
I am make a steam engine
Plz next try to make a steam engine
👍👍👍☺️☺️
Very good!
Good job👍
Amazing 😍😍😍😍
Very nice 👍 🇰🇼جميل جداً
Go to 7:51 to skip all of the building process
Just a suggestion. You can try using Reed switch for exciting the electromagnet instead of mechanical switch.
Super video, Thanks
BRAVO... bien fait.. subscrit & like
Can eliminate the mechanical switch & noise with a big magnetic reed switch ! Good job though !!!!!!! Liberty Larry !!!!!!!
Why uh supplying power..?
It’s a solenoid engine
Even better, feed the solenoid coil with a square wave from 555 IC to create a variable speed engine.
Correct.
Helpful video sir
So good 👍👍👍
I like it
The S.R.O. ! Leaves ! A !! Lot ! To be !.Disired !!
desired
Hi. Is it run by battary power supply or self running? Are you connecting the coil wire end part with anything
Yes it is connected to a power source
it's connected to a power source it's not free energy , THERE IS NO FREE ENERGY!
super cool! sounds nice haha
sounds beautiful
beautiful video
Boa amigo.. chegando por aqui para prestigiar e fortalecer seu canal..Bom trabalho!!
th-cam.com/video/hUL1coD4SsQ/w-d-xo.html
Collapsing field. The same as a car ignition coil . Our future car engines.
Hi, Nice work. You didn't show the power source and how to connect to it? Could you do that please? Thanks
Nice bro😍😍
where do we get the flywheel or something simmilar?
What determines the number of wraps of copper wire? I assume it’s a function of the strength of the magnetic field.
I had a question, how are you applying 12 V DC when , both the wires are connected to the switch ?
Lo felicito bro por su ralento
How many watts is it consuming? what is the maximum RPM and torque ?
And that's how e board's where invented.
Dunno if anyone gives a shit but if you're stoned like me during the covid times you can watch all of the latest movies on InstaFlixxer. I've been streaming with my brother recently :)
@Gunnar Stetson yup, I have been watching on instaflixxer for years myself =)
Instead of magnet if you use iron piston, you may check if this runs faster. I.e. Bob teal's engine
What is role of that switch can you please tell me?
Nice try and great effort, my doubt is are you giving external power to this using that 2 extended wires?
Of course it's using external power. It doesn't work with magic
@@hene193 Yes you are right. Now i understand we should give some fuel to run any engine, here it's electricity. Thanks for the comment.
@@cypherLabs who are you
@@dhritimansalim6504 I was curious on how that engine works. I'm just a youtuber bro.
Where did u get that flywheel?
Я уже на третьей минуте понял что без синей изоленты работать не будет
The way I made it works pretty well too
So you really madeaswitch tester? Lol but really this is cool
Primero que nada buen proyecto
Segundo quisiera saber que potencia tiene en HP?
what are you using it for?
Amazing!!!!
Thank you brother
I never saw this kind of mechanical circuitry
Good 👍😎 😶👏
No muestras la batería donde están conectados los demás cables....
El problema no es el motor es la energía barata para generar el movimiento. Cuánta energía consume y cuánta entrega. Con la mínima contaminación posible.
Why didn't you show what those 2 wires were connected to?
Very cool! Song names?
Con que voltaje trabaja o adonde está conectada la bobina???
Rahul Damor
12 volt 1~2 amps
what was your electric service? battery
That sounds like a real engine
GOOD job😀😀
What if we use thin wire and give less or more turns please give me answer
What are the 2 offscreen wires connecting to?
A 12V battery
Make it bang every 2 cycles and I'll like and subscribe
mantaaap
indonesia .hadir
That clicking switch supppper se bhi uper
Бабья радость :))
You didn't show the battery , you give to the coil how many volt to active the coil ?
احسنت 🇰🇼well done Bravo
Bhai aap ko saman use kar rahe ho o kahape milega
Tem que mostrar a fonte de energia.
Até onde sei, não tem como gerar energia para isso, e mais com um único cilindro. Se fosse dois ou mais, as chances seria mais favorável.
Mas gostei da engenharia, criação boa, dá para ter uma noção.
Does this has no difference with a DC motor?
How did you winded copper wire
Very good
Hey i am just askinn will it work like if i put geared moter on the crankshaft and it generates power so can i connect the motor to ti the coil and make it run infinite ♾️ reply if yes or no
no it won't trust me THERE IS NO FREE ENERGY!!
@@IPagma-n7f ok thanks
Try to add more cylenders
Spne bhai ke liye
Mantap 👍👍
Nyasar Ya Bro 😂
@@brokenwing9409 😂😂 gak bro emang sengaja😂
@@gesangmulya Tersesat Bersama 😂
@@brokenwing9409 senasib dong😂
Mamir jg ke channelku ya? Mohon dukunganya🙏🙏🙏
Awesome
Thank you .
würde besser laufen, wenn das schwungrad richtig drauf währe?
Coba sertai generator mini berapa lama bertahan dan beban dibawa
Nice , But howmany volts supply.
👍Nice
Educational making
I am confused as to how this works
th-cam.com/video/HohJrH7PLfE/w-d-xo.html
Not sure why you need magnets in the piston. A solenoid engine could just have a steel piston I think.
that's what I want to know
I also think any ferrous material would probably work, as the magnetic field from the solenoid would attract the material. Maybe by starting with something that already has poles the force is greater?
We still waiting on the kit. Somebody fears success .. or actual work
can you increase the speed?
Use more voltage to more speed
Muito bom
Nice 💯
How much cc is it
Good
Can we buy this
Can you make a diesel engine?
Please tell us about circuit how to make that
This is a single-cylinder perpetual motion machine, isn't it?
Perpetual motion machine does not exist
Sorry but Perpetual motion machines are IMPOSSIBLE 🙁🙁
Best idea
Молодец а теперь тоже самое сделай из двигателя мопеда
Поработает и остановится
Can I buy this?
Are you from India please reply
What are you hiding? Why don’t you show what those two wires are connected to.
It's just a power supply. You don't need any electronics, the cam turning the microswitch on and off does it all.
Sir please give explanation about this mechanism.
Está quase no ponto o uso de solenoide, no entanto ainda pode acontecer que o imã se desmagnetize aos poucos... Melhor seria se fosse atraído somente um dos polos.
super work next let's go to africa amazing scientists kids #queenshebadiy
Que lo hace gira alguna batería
Uh... How to count 180 spin?
if put on orizontal line, -wil be work ?
Idk wil be work ?
My opinion, the slow idle speed was a fake. The persons hand moved very slow. Watch close & see.